AS5147 14-Bit On-Axis Magnetic Rotary Position Sensor with 11-Bit Binary Incremental Pulse Count The AS5147 is a high-resolution rotary position sensor for fast General Description absolute angle measurement over a full 360-degree range. This new position sensor is equipped with a revolutionary integrated dynamic angle error compensation (DAEC) with almost 0 latency. The robust design of the device suppresses the influence of any homogenous external stray magnetic field. A standard 4-wire SPI serial interface allows a host microcontroller to read 14-bit absolute angle position data from the AS5147 and to program non-volatile settings without a dedicated programmer. Incremental movements are indicated on a set of ABI signals with a maximum resolution of 2048 steps / 512 pulses per revolution. The resolution of the ABI signal is programmable to 1024 steps / 256 pulses per revolution. Brushless DC (BLDC) motors are controlled through a standard UVW commutation interface with a programmable number of pole pairs from 1 to 7. The absolute angle position is also provided as PWM-encoded output signal. The AS5147 supports embedded self-diagnostics including magnetic field strength too high, magnetic field strength too low or lost magnet, and other related diagnostic features. The product is defined as SEooC (Safety Element out of Context) according ISO26262 including FMEDA, safety manual and third party qualification. The AS5147 is available as a single die in a compact 14-pin TSSOP package. Ordering Information and Content Guide appear at end of datasheet. ams Datasheet Page 1 v1-10 2016-Apr-27 Document FeedbackAS514 7 Gene ral Des c rip t ion Key Benefits & Features The benefits and features of AS5147, 14-Bit On-Axis Magnetic Rotary Position Sensor with 11-Bit Binary Incremental Pulse Count are listed below: Figure 1: Added Value of Using the AS5147 Benefits Features Easy to use saving costs on DSP DAEC Dynamic angle error compensation Good resolution for motor and position control 14-bit core resolution Independent output interfaces: SPI, ABI, UVW, Versatile choice of the interface PWM No programmer needed (via SPI command) Zero position, configuration programmable Supports safety challenging applications Self-Diagnostics Lower system costs (no shielding) Immune to external stray field Applications The AS5147 has been designed to support BLDC motor commutation for the most challenging automotive applications (AEC-Q100 grade 0 automotive qualified) such as electric power steering (EPS), transmission (gearbox, actuator), pump, brake (actuator) and starter and alternator. Page 2 ams Datasheet Document Feedback v1-10 2016-Apr-27