AS5200L-AMFM ams

AS5200L 12-Bit On-Axis Magnetic Rotary Position Sensor with Redundant IC and PWM Outputs The AS5200L is an easy to program stacked dual die magnetic General Description rotary position sensor with redundant high-resolution 12-bit IC or PWM outputs. This contactless system measures the absolute angle of a diametric magnetized on-axis magnet. This AS5200L is designed for contactless potentiometer applications and its robust design eliminates the influence of any homogenous external stray magnetic fields. The industry-standard IC interface supports simple user programming of non-volatile parameters without requiring a dedicated programmer. By default the output represents a range from 0 to 360 degrees. It is also possible to define a smaller range to the output by programming a zero angle (start position) and a maximum angle (stop position). The AS5200L is also equipped with a smart low power mode feature to automatically reduce the power consumption. AS5200L is designed for automotive applications and is AEC-Q100 grade 1 qualified. To enable safety-critical applications it has two separate sensor dies in one MLF-16 (5x5) package with wettable flanks. Ordering Information and Content Guide appear at end of datasheet. Key Benefits & Features The benefits and features of this device are listed below: Figure 1: Added Value of Using AS5200L Benefits Features Highest reliability and durability Contactless angle measurement Simple programming Simple user-programmable start and stop positions over the IC interface Selectable output Digital output over IC or PWM-encoded output Low-power consumption Automatic entry into low-power mode Easy setup Automatic magnet detection Small form factor MLF-16 (5mm x 5mm) package with wettable flanks Robust environmental tolerance Wide temperature range: -40C to 125C ams Datasheet Page 1 v1-02 2018-Jan-19 Document FeedbackAS 520 0L Gen e ra l De s c rip t ion Applications The AS5200L is ideally suited for embedded automotive applications where the sensor output is read by a close MCU. The two separate sensor dies enable for safety-critical automotive applications like gear-shifters, contactless knobs, pedals, joysticks and other angular position measurement solutions. Block Diagram The functional blocks of this device are shown below: Figure 2: Functional Blocks of AS5200L SDA T SCL T VDD3V3 T DIR T VDD3V3 B SDA B SCL B DIR B Register Setting Low-Dropout VDD5V T (LDO) Regulator IC One-Time VDD5V B (internal load only) Programmable (OTP) Memory Analog Hall Sensors Front-End OUT T PWM Driver Digital ATAN OUT B AFE 12-bit A/D Processing (CORDIC) and Filtering Automatic Gain Control (AGC) Magnetic Core AS5200L GND T GND B Page 2 ams Datasheet Document Feedback v1-02 2018-Jan-19