AS5510-WLCSP-AB ams

AS5510 Linear Hall Sensor with IC Output The AS5510 is a Linear Hall Sensor with 10 bit resolution and IC General Description interface. It can measure absolute position of lateral movement of a simple 2-pole magnet. Depending on the magnet size, a lateral stroke of 0.5~2mm can be measured with air gaps around 1.0mm. To conserve power, the AS5510 may be switched to a power down state when it is not used. It is available in a WLCSP and SOIC8 package and qualified for an ambient temperature range from -30C to +85C. Ordering Information and Content Guide appear at end of datasheet. Key Benefits & Features The benefits and features of AS5510, Linear Hall sensor with IC output are listed below: Figure 1: Added Value of using AS5510 Benefits Features Highest reliability and durability Contactless position measurement Ideal for battery powered devices Power down mode 2 Easy to use Simple configuration over the I C interface High-resolution output 10bit resolution Operates in wide magnetic range Programmable sensitivity Smallest form factor Available in two different packages: WLCSP & SOIC8 Applications The AS5510 is ideal for: Position sensing Servo drive feedback Camera lens control Closed loop position control. ams Datasheet: 2014-Jun-05 v1-03 AS5510 1Power down Block Diagram The functional blocks of this device for reference are shown below: Figure 2: AS5510 Block Diagram Front Offset Buffer & Filter ADC 10 bit End Compensation Biasing & DSP Reference 2 Factory Gain Trim I C Test SDA SCL ADR VDD VSS AS5510 2 ams Datasheet: 2014-Jun-05 v1-03