AS7264N XYZ Chromatic Color and 440/490nm Blue Sensor with Electronic Shutter The AS7264N provides direct XYZ sensor data which conforms General Description to the tri-stimulus standard observer color response of the human eye. In addition, two channels added for measurement of blue spectrum light, plus a near-IR channel enables additional application flexibility. LED drivers with programmable currents are provided for electronic shutter applications. The AS7264N integrates Gaussian filters into standard CMOS silicon via nano-optic deposited interference filter technology and is packaged in an LGA package that provides a built in aperture to control the light entering the sensor array. Control and spectral data access is implemented through an IC register set. Ordering Information and Content Guide appear at end of datasheet. Key Benefits & Features The benefits and features of AS7264N, XYZ Chromatic Color and 440/490nm Blue Sensor with Electronic Shutter are listed below: Figure 1: AS7264N Benefits and Features Benefits Features XYZ channel data conforming to human eye XYZ tri-stimulus standard observer filter set response to color information Additional specific blue light sensing in ranges associated with eye health and other biological Two added blue channels at 440nm and 490nm light effects High accuracy ambient light measurements Ambient light sensing (photopic response) Direct register read and write with interrupt on IC slave digital Interface with optional interrupt sensor ready operation High stability over lifetime with minimal drift over Filter set realized by silicon interference filters temperature No additional signal conditioning required 16-bit ADC with digital access Direct register read and write with interrupt on IC slave digital Interface with optional interrupt sensor ready operation ams Datasheet Page 1 v1-00 2017-Oct-05 Document FeedbackAS 726 4N Gen e ra l De s c rip t ion Benefits Features Electronic shutter control/synchronization Programmable LED drivers Low voltage operation 2.7V to 3.6V with IC interface 20-pin LGA package 4.5mm x 4.7mm x 2.5mm Small, robust package, with built-in aperture -40C to 85C temperature range Application The AS7264N applications include: Ambient light spectral exposure Biological lighting measurements Color measurement and absorbance Color matching and identification Precision color tuning/calibration System Block Diagram Figure 2: AS7264N Sensor System 3.3V 10uF 100nF 3.3V VDD1 VDD2 3.3V AS7264N LED IND LED DRV SCL S MCU SDA S X, Y, Z, Light Source INT NIR, B440 & B490 Light in Sensors Reflective Surface GND Page 2 ams Datasheet Document Feedback v1-00 2017-Oct-05