AS73211-AB5 ams

high performance needs great design. Coverpage: AS73211-AB5 Datasheet Please be patient while we transfer this adapted former MAZeT document to the latest ams design. www.ams.com DATASHEET AS73211-AB5 2 JENCOLOR - Sensor Board with I C-Interface Order No.: 220810002 Status: preliminary INTRODUCTION This document describes the hardware of the AS73211-AB5 designed by ams Sensors Germany. The OEM sensor solution is a small PCB for general color measurement and control applications, with a high bandwidth for light energy and optimized for handheld applications. The board is suitable for benchmarks, feasibilities or as OEM solutions for tests. The sensor board includes the True Color sensor AS73211 with IC interface 1 , which filters are based on the international CIE 1931 standard. The sensor also includes an analog-to-digital converter which realizes a current-to-capacity digitizing within a high dynamic range and 20 Bit ADC solution. Further components on board are an EEPROM, power regulator and a standard IC-interface. IC is used for external communication, configuration of the sensor, readout of the sensor data as well as reading and writing of the memory. Figure 1 shows the block diagram. At the IC Bus is also still the EEPROM connected. The bus is directly accessible via a connector. The power supply of the module is also carried out via this connector. A linear regulator generates the system voltage and supplies via filter the analog and digital circuit of the sensor. Figure 1: Block diagram AS73211-AB5 Production data information is current as of publication date. Products conform to specifications per the terms of ams Sensors Germany GmbH. The information in this document is subject of change without notice, please confirm that this is the latest version. Please check with a ams Sensors Germany sales representative for availability and further information. Full legal notices can be found on the final page. ams Sensors Germany GmbH db16430 V2.01 - 2017-07-06