TSL2591EVM ams

TSL2591 Light-to-Digital Converter The TSL2591 is a very-high sensitivity light-to-digital converter General Description that transforms light intensity into a digital signal output capable of direct IC interface. The device combines one broadband photodiode (visible plus infrared) and one infrared-responding photodiode on a single CMOS integrated circuit. Two integrating ADCs convert the photodiode currents into a digital output that represents the irradiance measured on each channel. This digital output can be input to a microprocessor where illuminance (ambient light level) in lux is derived using an empirical formula to approximate the human eye response. The TSL2591 supports a traditional level style interrupt that remains asserted until the firmware clears it. Ordering Information and Content Guide appear at end of datasheet. Figure 1: Added Value of Using TSL2591 Benefits Features Approximates Human Eye Response Dual Diode Flexible Operation Programmable Analog Gain and Integration Time Suited for Operation Behind Dark Glass 600M:1 Dynamic Range Two Internal Interrupt Sources Low Operating Overhead Programmable Upper and Lower Thresholds One Interrupt Includes Programmable Persistence Filter Low Power 3.0 A Sleep State User Selectable Sleep Mode Data Rates up to 400 kbit/s IC Fast Mode Compatible Interface Input Voltage Levels Compatible with 3.0V Bus ams Datasheet Page 1 v2-04 2018-Jun-05 Document FeedbackT S L2 591 Gen e ra l De s c rip t ion Block Diagram The functional blocks of this device are shown below: Figure 2: Block Diagram Page 2 ams Datasheet Document Feedback v2-04 2018-Jun-05