SH-1224WP SERIES WALL MOUNT WEATHER PROOF SELECT-A-STROBE/HORN UL and cUL listed 12 VDC with 15, 35 or 60 cd setting 24 VDC with 15, 35, 60, 75, 95 or 110 cd settings Outdoor and indoor 6 distinctive candela settings Candela selection view window 15/75 ADA compliant on 60cd setting 33 sound output settings Horn or chime sound output Pre-wire back plate Universal back plate mounting (single gang, double gang, octagon, or 4 square) Single screw mounting Low current draw The SH-1224WP Strobe/Horn Series provides a wide range of candela The voltage input can be either regulated DC or full wave rectied (FWR) light output options in a single device. The candela settings include a 12 volt or 24 volt operation with an operating range of 8 to 33V DC. 12 or 24 volt DC operation for the 15, 35 and 60 (75 on axis) candela The SH-1224WP utilizes a universal mounting plate that will mount on settings and 24 volt DC operation for the 15, 35, 60, 75, 95 and 110 a single gang, double gang, octagon and 4 square electrical boxes. The candela settings. The candela setting is displayed through the front back plate allows the installer to mount the plate and terminate the wire window and is selectable using a drum wheel. The strobes can be connections. The strobe/horn attaches in a hinge fashion from the top synchronized using a control panel with the Potter(Amseco) sync and is secured by a single mounting screw. The strobe/horn completely protocol or a SMD10-3A sync module. covers the mounting back plate, therefore it can be mounted before other trades work is completed and not affect the nal look. The horn settings include Temporal, Non-Temporal, March Time and a Chime sound. The horn also has Low, Mid and High volume The Potter SH-1224WP is listed for both outdoor and indoor settings for each pattern and tone. The tones include 2400 Hz, Electro- installations. For outdoor installations the device must be mounted on Mechanical and Broadband. a matching BBX-5 back box or a BBK-1 bell back box. Installation Note: Installation must comply in accordance with applicable standards. OPTIONAL BBK-1 OUTDOOR BOX Ordering Information Add-on * = P for plain enclosure (no Fire decal) Stock Number Model Number Description Color 4710010 SH-1224WP-R* Selectable strobe/horn/chime Red 4710011 SH-1224WP-W* Selectable strobe/horn/chime White 4670017 SMD10-3A Sync module 4270048 Red BBX-5 Back box (included) 4270049 White 1500001 BBK-1 Bell back box Red INTEC Controls 9730 Distribution Ave., San Diego, CA 92121 Cust. Service: 858-578-7887 Fax: 858-578-4633 www.inteccontrols.com PRINTED IN USA MKT. 8910008 - REV H PAGE 1 OF 4 7/10SH-1224WP SERIES WALL MOUNT WEATHER PROOF SELECT-A-STROBE/HORN Dimensions: inches (mm) Light output in precentage when measured from the following directions per UL 1971. 5 (127) 3.374 (85.7) Back View DWG 891-2 OPTIONAL BBX-5 OUTDOOR BACK BOX 3.374 (85.7) 5.5 (139.7) Back View Front View 6.208 (157.7) Bottom View DWG 891-1 High voltage may be present inside the light assembly even though power is not connected. If access to the component board is required (removal or replacement), the capacitor must be discarged by touching a wire to both ends of the ashtube. DO NOT attempt to touch or move the assembly until the capacitor has been discharged. ON Specications Horn Dipswitch Strobe Current Setting Light Max. RMS Operating Current (mA RMS) Pattern Output 1 2 3 4 5 6 7 8 Reg. 12 VDC Reg. 12 FWR Reg. 24 VDC Reg. 24 FWR 1 ON - Non-temporal 1 OFF - Temporal 1 15cd 129 185 100 102 Both 2 = OFF 2 35cd 160 214 135 161 1 and 2 ON = March Time 3 60/75cd 193 239 171 202 4 75cd NA NA 190 228 Tone 5 95cd NA NA 211 255 3 and 4 ON = 2400Hz 6 110cd NA NA 225 284 3 ON and 4 OFF = Electromechanical 3 and 4 OFF = Chime Voltage 12/24V 3 OFF and 4 ON = Broadband UL Designation Regulated 12 DC/FWR Regulated 24 DC/FWR Volume Operating Voltage Range 8 - 17.5V 16 - 33V 5 and 6 ON = High Flash Rate 60 times/min. 5 ON and 6 OFF = Mid Sync Module (SMD10-3A) NA Available 5 and 6 OFF = Low Operating Temperature Indoor installations: 32F to 120F (0C to 49C) 7 and 8 ON = Horn/strobe on 2 wires Range Outdoor installations: -40F to 151F (-40C to 66C) 7 and 8 OFF = Horn/strobe on 4 wires Note: To determine total current draw, add desired strobe setting and horn selection. Refer to the installation instructions for further information. PRINTED IN USA MKT. 8910008 - REV H PAGE 2 OF 4 7/10 2 5/16 (59) 6 5/64 (154.4) 3.374 (85.7) 6.515 (165.5) 0.905 (23) 2 (50.8) 3.374 (85.7)