CSH-1224W SERIES WALL MOUNT MASS NOTIFICATION STROBE/HORN 3 settings at 12 VDC 6 settings at 24 VDC Strobe output selection view window Pre-wire back plate Universal back plate mounting (single gang, double gang, octagon, or 4 square) Single screw mounting 33 sound output settings Indoor or outdoor Anodized reflector for true light output UL and cUL listed Patents pending * Outdoor installation requires the BBK-1 1500001, BBX-5R 4270048, or BBX-5W 4270049 Call for additional listings The CSH-1224W Strobe/Horn Series provides a wide range of 33V DC. The strobes can by synchronized using a control panel with candela light output options in a single device. The candela settings the Potter (Amseco) sync protocol or SMD10-3A sync module. include a 12 or 24 volt DC operation for the 1-3 settings candela The CSH-1224W utilizes a universal mounting plate that will mount on settings and 24 volt DC operation for the 1-6 candela settings. a single gang, double gang, octagon and 4 square electrical boxes. The The candela setting is displayed through the front window and is back plate allows the installer to mount the plate and terminate the wire selectable using a drum wheel. connections. The strobe/horn attaches in a hinge fashion from the top The horn settings include Temporal, Non-Temporal, March Time and is secured by a single mounting screw. The strobe/horn completely and a Chime sound. The horn also has Low, Mid and High volume covers the mounting back plate, therefore it can be mounted before settings for each pattern and tone. The tones include 2400 Hz, Electro- other trades work is completed and not affect the nfi al look. Mechanical, Broadband and Chime. The Potter mass notification strobe/horn is listed for indoor and The voltage input can be either regulated DC or full wave rectified outdoor installations. For outdoor installations, the device must be (FWR) 12 volt or 24 volt operation with an operating range of 8 to mounted on a matching BBX-5 or BBK-1 outdoor bell back box. Installation Note: Installation must comply in accordance with applicable standards. OPTIONAL BBK-1 OUTDOOR BOX CSH-1224W CSL-1224W Ordering Information Stock Number Model Number Body Color Lens Color 4800051 CSH-1224W-AR Red Amber 4800052 CSH-1224W-AW White Amber 4800053 CSH-1224W-BR Red Blue 4800054 CSH-1224W-BW White Blue 4800055 CSH-1224W-GR Red Green 4800056 CSH-1224W-GW White Green 4800057 CSH-1224W-RR Red Red 4800058 CSH-1224W-RW White Red Potter Electric Signal Co., LLC St. Louis, MO Cust Service: 866-240-1870 Tech Support:866-956-1211 Canada 888-882-1833 www.pottersignal.com PRINTED IN USA MKT. 8910012 - REV E PAGE 1 OF 4 6/10CSH-1224W SERIES WALL MOUNT MASS NOTIFICATION STROBE/HORN Dimensions: inches (mm) OPTIONAL BBX-5 OUTDOOR BACK BOX 3.374 (85.7) 5.5 (139.7) Back View 5 (127) Front View 6.208 (157.7) 3.374 (85.7) Back View Bottom View DWG 891-1 DWG 891-2 ON Horn Dipswitch High voltage may be present inside the light assembly Pattern 1 2 3 4 5 6 7 8 even though power is not connected. If access to the 1 ON - Non-temporal component board is required (removal or replacement), 1 OFF - Temporal the capacitor must be discarged by touching a wire to Both 2 = OFF both ends of the flashtube. 1 and 2 ON = March Time DO NOT attempt to touch or move the assembly until the Tone capacitor has been discharged. 3 and 4 ON = 2400Hz 3 ON and 4 OFF = Electromechanical 3 and 4 OFF = Chime Specifications 3 OFF and 4 ON = Broadband Strobe Current Volume Set- Light Max. RMS Operating Current (mA RMS) ting Output 5 and 6 ON = High Reg. 12 Reg. 12 Reg. 24 Reg. 24 VDC FWR VDC FWR 5 ON and 6 OFF = Mid 5 and 6 OFF = Low 1 15cd 129 185 100 102 7 and 8 ON = Horn/strobe on 2 wires 2 35cd 160 214 135 161 7 and 8 OFF = Horn/strobe on 4 wires 3 60/75cd 193 239 171 202 4 75cd NA NA 190 228 5 95cd NA NA 211 255 6 110cd NA NA 225 284 Candela Output Select-A- Light Output on Axis (cd) Switch Voltage 12/24V Amber Blue Green Red UL Designation Regulated 12 DC/ 1 14 10 13 7 Regulated 24 DC/FWR FWR 2 37 20 39 17 Operating Voltage 8 - 17.5V 16 - 33V 3 49 28 50 18 Range 4 69 41 77 28 Flash Rate 60 times/min. 5 83 51 94 35 Sync Module (SMD10- NA Available 6 99 58 109 38 3A) Operating Temperature Indoor model: 32F to 120F (0C to 49C) Range Outdoor model: -40F to 151F (-40C to 66C) Note: To determine total current draw, add desired strobe setting and horn selection. Refer to the installation instructions for further information. PRINTED IN USA MKT. 8910012 - REV E PAGE 2 OF 4 6/10 2 5/16 (59) 6 5/64 (154.4) 3.374 (85.7) 6.515 (165.5) 0.905 (23) 2 (50.8) 3.374 (85.7)