P2 SERIES HIGH SECURITY SENSOR Listed to UL 634 Level 2 Standards Resistant to external and internal magnetic defeat Unique cross hole mounting feature eliminates need for L and Z brackets on most installations Retrofit for existing BMS devices No adjustment required for installation Industrys most secure removal tamper sensor/circuit May be used as an intrinsically safe simple apparatus Resists permanent contact welding (lightning, power surges, stun guns) Single and dual alarm contacts available Hermetically sealed switch contacts Fully epoxy potted assembly Stock number: 2020410 P2S-000 single contact Indoor or outdoor use 2020411 P2S-001 single contact w/ 1K embedded resistor 2020420 P2D-000 dual contact Experts agree that the most devastating threats to government and In addition to the sensors inside that will detect the presence of a corporate security have come from employees who were deemed stronger defeat magnet placed on any surface of the HSS, the removal trusted insiders. Armed with simple magnets, unscrupulous insiders tamper circuit will alarm before the HSS can be removed. can disable even triple-balanced BMS magnetic contacts while the The construction of the HSS devices incorporates robust, hermetically system is unarmed, and enter undetected at a later time, leaving no sealed Magnasphere switch technology as well as complete epoxy evidence of tamper. encapsulation of all electrical components and magnetic actuation. The P2 High Security Switch (HSS) combined with Magnasphere This allows the HSS models to conform to the requirements of UL technology meets the UL 634 Level 2 High Security Standard. 913 and be used as an intrinsically safe simple apparatus device in The P2 HSS meets standards for use with SCIF and all other High hazardous locations. The P2 HSS devices must be used in conjunction Security Applications. The P2 HSS is resistant to external and internal with an intrinsically safe barrier. magnetic defeat. In addition, the switch resists permanent contact Creative design of the P2 HSS switch itself eliminates the need for L welding due to lightning, power surges, or stun guns. or Z brackets. Aluminum Case Silver grey anodized Wire Lead Type Solid color coded lead wires Single Alarm Contact (P2S) Closed or open loop Dual Alarm Contact (P2D) Closed loop Removal Tamper Circuit Closed loop Max. Current 0.25 A resistive Max. Voltage 30 VDC Max. Power 0.250 W Operating Temperature -40F to 176F (-40C to 80C) Potter Electric Signal Co., LLC St. Louis, MO Cust Service: 866-240-1870 Tech Support:866-956-1211 Canada 888-882-1833 www.pottersignal.com PRINTED IN USA MKT. 8880142 - REV D PAGE 1 OF 2 6/10P2 SERIES HIGH SECURITY SENSOR Wiring SC Closed Loop WHT SC ALARM Single alarm contact either closed or open loop, with tamper circuit, Open Loop CIRCUIT RED closed loop. Common BLK Supervised For built-in EOL resisitor configurations and values not shown, Common GRN TAMPER contact Potter. CIRCUIT MT Magnet Tamper YEL PT Magnet/Pry Tamper BLU SC1 Closed Loop WHT Common BLK SC2 Dual alarm contacts both closed loop, with tamper circuit, closed loop. Closed Loop ORN For built-in EOL resistor configurations and values not shown, contact Potter. Common PUR Supervised Common GRN MT Magnetic Tamper YEL PT Magnet/Pry Tamper BLU Dimensions 4.25 3 SENSOR .5 1 1.5 1 3.5 36 1 1 3.5 1.5 1 MAGNET 1 PRINTED IN USA MKT. 8880142 - REV D PAGE 2 OF 2 6/10