HMC826LP6CE v05.1211 FRACTIONAL-N PLL WITH INTEGRATED VCO, 990 - 1105 MHz Features RF Bandwidth: 990 to 1105 MHz 24-bit Step Size, Resolution 3 Hz typ Ultra Low Phase Noise Exact Frequency Mode -110 dBc/Hz in Band Typ. Built-in Digital Self Test Figure of Merit (FOM) -227 dBc 2 40 Lead 6x6mm SMT Package: 36mm < 180 fs RMS Jitter Typical Applications Cellular/4G Infrastructure Phased Array Applications Repeaters and Femtocells DDS Replacement 7 Communications Test Equipment Very High Data Rate Radios CATV Equipment t Functional Diagram ten gra t e Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, and to place orders: Analog Devices, Inc., For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Phone: 781-329-4700 Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. 7 - 1 Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 1-800-ANALOG-D Application Support: Phone: 978-250-3343 or apps hittite.com PLLS w/ Id VCO - SMHMC826LP6CE v05.1211 FRACTIONAL-N SYNTHESIZER WITH INTEGRATED VCO, 990 - 1105 MHz General Description The HMC826LP6CE is a fully functioned Fractional-N Phase-Locked-Loop (PLL) with an Integrated Voltage Controlled Oscillator (VCO). The PLL consists of an integrated low noise VCO with divide-by-2 output, an autocalibration subsystem for low voltage VCO tuning, a very low noise digital Phase Detector (PD), a precision controlled charge pump, a low noise reference path divider and a fractional divider. The fractional PLL features an advanced delta-sigma modulator design that allows both ultra-fine step sizes and low spurious products. The phase detector (PD) features cycle slip prevention (CSP) technology to allow faster frequency hopping times. Ultra low in-close phase noise and low spurious also allows wider loop bandwidths for faster frequency hopping and low micro-phonics. For theory of operation and register map refer to the PLLs with Integrated VCOs - RF VCOs Operating Guide. To view the Operating Guide, please visit www.hittite.com and choose HMC826LP6CE from the Search by Part Number pull down menu. 7 Electrical Specifications, T = +25 C A VPPCP, VDDCP, VCC1, VCC2 = 5V 4% RVDD, AVDD, DVDD3V, VCCPD, VCCHF, VCCPS = 3.3V 6% GNDCP = GNDLS = Ground Paddle = 0V t Parameter Condition Min. Typ. Max. Units RF Output Characteristics VCO Frequency at PLL Input 1980 2210 MHz RF Output Frequency at f /2 990 1105 MHz VCO RF Output Power at f /2 8 11 15 dBm VCO VCO Tuning Sensitivity Measured at 2 GHz, 2V 15 MHz/V VCO Supply Pushing Measured at 2 GHz, 2V -2 1.5 MHz/V RF Output 2nd Harmonic -25 dBc RF Output 3rd Harmonic -23 dBc RF Output 4th Harmonic -31 dBc RF Output 5th Harmonic -33 dBc RF Divider Characteristics 19 19-Bit N-Divider Range (Integer) Max = 2 - 1 16 524,287 Fractional nominal divide ratio 19-Bit N-Divider Range (Fractional) 20 524,283 varies (-3 / +4) dynamically max nte agr t e REF Input Characteristics Synthesizer phase noise can degrade by about 5dB when Max Ref Input Frequency operating with a reference 10 50 200 MHz frequency near the low end of this range. Ref Input Range AC Coupled 1.5 2 3.3 Vpp Ref Input Capacitance 5 pF 14-Bit R-Divider Range 1 16,383 Phase Detector (PD) 1 PD Frequency Fractional Feedback Mode 0.1 100 MHz PD Frequency Fractional Feedforward Mode 0.1 80 MHz (and Register 6 17:16 = 10) 1 PD Frequency Integer Mode 0.1 125 MHz Note 1: This maximum phase detector frequency can only be achieved if the minimum N value is respected. eg. In the case of fractional feedback mode, the maximum PFD rate = fvco/20 or 100MHz, whichever is less. Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, and to place orders: Analog Devices, Inc., For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Phone: 781-329-4700 Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. 7 - 2 Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 1-800-ANALOG-D Application Support: Phone: 978-250-3343 or apps hittite.com PLLS w/ Id VCO - SM