OBSOLETE DESCRIPTION Analog Devices Power Supplies are designed to provide .OEMs and circuit designers with a broad line of high reliability, regulated and short circuit protected power supplies at low overall cost. These modules are available with 5 volt to 24 volt output (single and dual), and current ratings from 25mA to 1 amp. Most Analog Devices Power Supplies are available from stock in both large and small quantities. Substantial discounts apply on quantity orders. FEATURES ADVANTAGES Packaged circuit modules have found wide acceptance. Engineers have Short Circuit Protected discovered the convenience and economy of plug-in building blocks ... Line & Load Regulated op amps, logic cards, miniature AID and DIA converters are now available in wide varieties. Now a complete line of modular power SmallSize supplies is available from Analog Devices. Most of these units are 5VDCto:t24VDC packaged in the popular encapsulated case. They are shipped ready to 25mA to 1000mA use, at prices below the internal manufacturing cost of most OEM users. Further savings and reduced lead time are achieved by elimi- TemperatJ.ireCom nating engineering start-up, documentation costs, and manufacturing .Low Cost ,from , delays. Designed by experts in op amp and digital logic technology, these units offer features that you would expect to find only in considerably more expensive supplies. ENCAPSULATED MODULES (900 SERIES) This line of modular power supplies covers most popular applications except for high current loads. These supplies all feature line and load regulation and are short circ Jit protected. Mating sockets are available, or the unit may be mounted on and soldered directly to a printed circuit card. Voltage ranges include 5VDC to : :24VDC. Current ranges extend from 25mA up to 1 amp. METAL CASED MODULES (900 SERIES) The : :15VDC, 300mA, 500mA and 1 amp cased power supplies are designed with the system designer s needs in mind. These units provide the power needed to run large Modularized, Transistorized and Integrated Circuit systems. The 300 and 500mA supplies come in 3.5 inch cube cases with an 11 pin connector (supplied). The: : 15 volt, 1 amp unit is mounted in a finned case and has barrier terminal strip connectors. All of these units provide for remote sensing. EXTRA-HIGH ACCURACY SUPPLIES (MPD SERIES) Analog DevicesMP line of Power Supplies are intended for appli- cations where the ultimate in performance is required. They feature excellent regulation and low temperature coefficients. Typical appli- cations include providing stable references for computing, instrument, and data reduction circuitry. All MPD supplies are sealed in anodized aluminum enclosures for maximum ruggedness and minimum RFI. Being essentially DC to DC converters, these units feature lowsee throug capacitance (typically 20pF) and are desirable for powering floated circuits and use in systems having considerable ground noise. OPTIONS Most supplies are available with 205-240V AC, 50-400Hz input at no additional charge. Specify option when ordering. Models 904 and 909 are available with a transformer shield which reduces input to output see-through capacity to 10pF max. Specify option T when ordering and add 8 each to unit prices. Model 906 (5VDC/250mA) ANALOG III available with 6.0VDC overvoltage protection at 8 each additional. All other 5VDC logic supplies (Models 903 and 905) include overvoltage DEVICES~ protection at no additional charge. ROUTE ONE INDUSTRIAL PARK P. O. BOX 280 NORWOOD, MASS. 02062 TEL: 617/329-4700 TWX: 710/394-6577 PRINTED IN U.s.A. CO72a-5-11/72 ---.- -- -~- ~- ---OBSOLETE REFERENCE GUIDE Model 950 Socket Height Weight Output Power Supply Model (Inches) Case (Grams) No. Input VlmA Manifold 1.25 P-1 530 AC1013 902 AC :t15/100 P-1 AC1013 902-2 AC :t 15/100 0.875 330 AC1013 1.25 P-1 530 903 AC 5/500 P-1 330 AC1013 904 AC :t 15/50 0.875 1.25 P-1 530 AC1013 905 AC 511000 P-1 AC1013 906 AC 5/250 0.875 330 P-1 330 AC1013 915 AC :t 15/25 0.875 AC :t 15/200 1.25 P-1 530 AC1013 920 AC1013 921 AC :t 12/240 1.25 P-1 530 P-1 750 AC1013 922 1.62 AC 5/2000 1.25 P-2 560 AC1581 923 AC :t15/100 + 5/500 P-1 925 AC :t 15/350 1.62 750 AC1013 1.25 P-2 475 AC1581 926 AC :t 15/150 + 5/300 P-2 645 AC1581 927 AC 1.62 :t 15/150 +5/1000 1.25 P-1 AC1013 928 AC + 5/3000 325 0.38 A-1 85 AC1051 940 5V :t 15/150 941 :t 12/150 0.38 A-1 85 AC1051 5V A-1 0.38 85 AC1051 943 5V +5/1000 A-1 85 AC1051 945 28V :t 15/150 0.38 0.375 A-2 45 AC1051 949 5V :t 15/60 220 951 :t15/410 0.88 P-3 AC1013 5V CM-2AA 590 N/A 952 AC :t 15/100 1.44 A-1 AC1051 953 12V :t 15/150 0.38 85 1.44 CM-2AA 590 N/A 955 AC +5/1000 957 +5/100 0.40 A-3 12 HSA-1 5V This 950 power supply manifold provides a fast, convenient, and 0.40 12 HSA-1 958 5V +5/100 A-3 inexpensive bench supply for breadboarding, testing, or general :t 12/40 0.40 A-3 12 HSA-1 959 5V laboratory use. Five ports are supplied which enable the 900 series P-1 cased modules to be directly plugged-in to this manifold. :t 12/40 0.40 A-3 12 HSA-1 960 5V Three output terminals provide easy user access to selected dual 12 961 5V :t 15/33 0.40 A-3 HSA-1 DC output or single DC output voltage source. Cost is just 82.00. A-3 12 HSA-1 962 5V :t 15/33 0.40 963 12V :t 15/33 0.40 A-3 12 HSA-1 915 902 :t 15V 25mA :t 15V 100mA 12 HSA-1 964 12V :t 15/33 0.40 A-3 920 902-2 :t 15V 100mA :t 15V 200mA A-1 965 5V :t 15/190 0.40 54 AC1051 921 :t 12V 240mA 903 :t 5V 500mA 922 A-1 AC1051 904 966 12V :t 15/190 0.40 54 :t 15V 50mA + 5V 2000mA 925 905 :t 15V 350mA +5V 1000mA 967 0.40 A-1 54 AC1051 24V :t 15/190 928 906 + 5V 250mA + 5V 3000mA A-1 AC1051 968 28V :t 15/190 0.40 54 1.44 CM-2AA 590 N/A 970 AC :t 15/200 AC 1.45 CM-2B 598 N/A 972 :t15/150 + 5/300 973 AC :t 15/350 2.00 CM-2AA 880 N/A 2.00 CM-2B 840 N/A 974 AC :t 15/150 +5/1000 975 AC :t 15/500 2.00 CM-2AA 880 N/A 976 AC + 5/3000 1.45 CM-2A 465 N/A P-4 550 AC1212 2B35 AC :t15/65 +1 1.25 to +15/125 Socket 1-4 Pricing AC 1013 15.00 AC 1051 15.00 AC 1212 11.00 AC 1581 14.00 HSA-1 2.50 -9- --- ---