High Precision
5 V Reference
AD586
FEATURES The AD586J, AD586K, AD586L, and AD586M are available in
an 8-lead PDIP; the AD586J, AD586K, AD586L, AD586A, and
Laser trimmed to high accuracy
AD586B are available in an 8-lead SOIC package; and the
5.000 V 2.0 mV (M grade)
AD586J, AD586K, AD586L, AD586S, and AD586T are
Trimmed temperature coefficient
available in an 8-lead CERDIP package.
2 ppm/C max, 0C to 70C (M grade)
V
IN
NOISE REDUCTION
5 ppm/C max, 40C to +85C (B and L grades)
2 8
10 ppm/C max, 55C to +125C (T grade)
Low noise, 100 nV/Hz
AD586
Noise reduction capability
R
Z1
R
S
Output trim capability
A1 6
V
MIL-STD-883-compliant versions available
OUT
R
Z2
R
F
Industrial temperature range SOICs available R
T
5 TRIM
Output capable of sourcing or sinking 10 mA
R
I
GENERAL DESCRIPTION
4
The AD586 represents a major advance in state-of-the-art
GND
monolithic voltage references. Using a proprietary ion-implanted
NOTES
buried Zener diode and laser wafer trimming of high stability 1. PINS 1, 3, AND 7 ARE INTERNAL TEST POINTS.
MAKE NO CONNECTIONS TO THESE POINTS.
thin-film resistors, the AD586 provides outstanding perform-
Figure 1.
ance at low cost.
The AD586 offers much higher performance than most other PRODUCT HIGHLIGHTS
5 V references. Because the AD586 uses an industry-standard
1. Laser trimming of both initial accuracy and temperature
pinout, many systems can be upgraded instantly with the
coefficients results in very low errors over temperature
AD586.
without the use of external components. The AD586M has
a maximum deviation from 5.000 V of 2.45 mV between
The buried Zener approach to reference design provides lower
0C and 70C, and the AD586T guarantees 7.5 mV
noise and drift than band gap voltage references. The AD586
maximum total error between 55C and +125C.
offers a noise reduction pin that can be used to further reduce
the noise level generated by the buried Zener.
2. For applications requiring higher precision, an optional
fine-trim connection is provided.
The AD586 is recommended for use as a reference for 8-, 10-,
12-, 14-, or 16-bit DACs that require an external precision
3. Any system using an industry-standard pinout reference
reference. The device is also ideal for successive approximation
can be upgraded instantly with the AD586.
or integrating ADCs with up to 14 bits of accuracy and, in
general, can offer better performance than the standard on-chip
4. Output noise of the AD586 is very low, typically 4 V p-p.
references.
A noise reduction pin is provided for additional noise
filtering using an external capacitor.
The AD586J, AD586K, AD586L, and AD586M are specified for
operation from 0C to 70C; the AD586A and AD586B are
5. The AD586 is available in versions compliant with
specified for 40C to +85C operation; and the AD586S and
MIL-STD-883. Refer to the Analog Devices Military
AD586T are specified for 55C to +125C operation.
Products Databook or the current AD586/883B data sheet
for detailed specifications.
Rev. G
Information furnished by Analog Devices is believed to be accurate and reliable.
However, no responsibility is assumed by Analog Devices for its use, nor for any
infringements of patents or other rights of third parties that may result from its use.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Specifications subject to change without notice. No license is granted by implication
Tel: 781.329.4700 www.analog.com
or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective owners. Fax: 781.461.3113 2005 Analog Devices, Inc. All rights reserved.
00529-001AD586
TABLE OF CONTENTS
Specifications..................................................................................... 3 Load Regulation ............................................................................9
AD586J, AD586K/AD586A, AD586L/AD586B ....................... 3 Temperature Performance............................................................9
AD586M, AD586S, AD586T ....................................................... 4 Negative Reference Voltage from an AD586........................... 10
Absolute Maximum Ratings............................................................ 5 Using the AD586 with Converters........................................... 10
ESD Caution.................................................................................. 5 5 V Reference with Multiplying CMOS DACs or ADCs ...... 11
Pin Configurations and Function Descriptions ........................... 6 Stacked Precision References for Multiple Voltages .............. 11
Theory of Operation ........................................................................ 7 Precision Current Source .......................................................... 11
Applying the AD586..................................................................... 7 Precision High Current Supply ................................................ 11
Noise Performance and Reduction ............................................ 7 Outline Dimensions ....................................................................... 13
Turn-on Time................................................................................ 8 Ordering Guide .......................................................................... 14
Dynamic Performance................................................................. 8
REVISION HISTORY
3/05Rev. F to Rev. G
Updated Format..................................................................Universal
Split Specifications Table into Table 1 and Table 2....................... 3
Changes to Table 1............................................................................ 3
Added Figure 2 and Figure 4........................................................... 6
Updated Outline Dimensions ....................................................... 13
Changes to Ordering Guide .......................................................... 14
1/04Rev. E to Rev. F
Changes to ORDERING GUIDE ................................................... 3
7/03Rev. D to Rev. E
Removed AD586J CHIPS ..................................................Universal
Updated ORDERING GUIDE........................................................ 3
Change to Figure 3 ........................................................................... 4
Updated Figure 12 ............................................................................ 7
Updated OUTLINE DIMENSIONS .............................................. 9
4/01Rev. C to Rev. D
Changed Figure 10 to Table 1
(Maximum Output Change in mV)............................................... 6
11/95Revision 0: Initial Version
Rev. G | Page 2 of 16