200 MHz Dual Integrated DCL with Level Setting DACs, Per Pin PMU, and Per Chip VHH Data Sheet ADATE304 FEATURES GENERAL DESCRIPTION Driver The ADATE304 is a complete, single-chip solution that performs 3-level driver with high-Z mode and built-in clamps the pin electronic functions of the driver, the comparator, and Precision trimmed output resistance the active load (DCL), per pin PMU, and dc levels for ATE appli- Low leakage mode (typically <10 nA) cations. The device also contains an HVOUT driver with a VHH Voltage range: 2.0 V to +6.0 V or 1.25 V to +6.75 V buffer capable of generating up to 13.5 V. 2.4 ns minimum pulse width, 2 V terminated The driver features three active states: data high mode, data low Comparator mode, and term mode, as well as an inhibit state. The inhibit Window and differential comparator state, in conjunction with the integrated dynamic clamp, facili- 500 MHz input equivalent bandwidth tates the implementation of a high speed active termination. Load The ADATE304 supports two output voltage ranges: 2.0 V to 12 mA maximum current capability +6.0 V and 1.25 V to +6.75 V by adjusting the positive and Per pin PMU negative supply voltages. Force voltage range: 2.0 V to +6.0 V or 1.25 V to +6.75 V Each channel of the ADATE304 features a high speed window 5 current ranges: 32 mA, 2 mA, 200 A, 20 A, 2 A comparator per pin for functional testing, as well as a per pin Levels PMU with FV, or FI and MV, or MI functions. All necessary dc 14-bit DAC for DCL levels levels for DCL functions are generated by on-chip 14-bit DACs. Typically < 5 mV INL (calibrated) The per pin PMU features an on-chip 16-bit DAC for high 16-bit DAC for PMU levels accuracy and contains integrated range resistors to minimize Typically < 1.5 mV INL (calibrated) linearity in FV mode external component counts. HVOUT output buffer 0 V to 13.5 V output range The ADATE304 uses a serial bus to program all functional blocks 84-lead, 9 mm 9 mm, CSP BGA package and has an on-board temperature sensor for monitoring the 900 mW per channel with no load device temperature. APPLICATIONS Automatic test equipment Semiconductor test systems Board test systems Instrumentation and characterization equipment Rev. C Document Feedback Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. rights of third parties that may result from its use. Specifications subject to change without notice. No Tel: 781.329.4700 20082017 Analog Devices, Inc. All rights reserved. license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. Technical Support www.analog.com ADATE304 Data Sheet TABLE OF CONTENTS Features .............................................................................................. 1 Thermal Resistance .................................................................... 19 Applications ....................................................................................... 1 Explanation of Test Levels ......................................................... 19 General Description ......................................................................... 1 ESD Caution................................................................................ 19 Revision History ............................................................................... 2 Pin Configuration and Function Descriptions ........................... 20 Functional Block Diagram .............................................................. 3 Typical Performance Characteristics ........................................... 23 Specifications ..................................................................................... 4 SPI Details ....................................................................................... 33 Total Function ............................................................................... 4 Definition of SPI Word .............................................................. 34 Driver ............................................................................................. 5 Write Operation.......................................................................... 35 Reflection Clamp .......................................................................... 7 Read Operation........................................................................... 36 Normal Window Comparator .................................................... 7 Reset Operation .......................................................................... 37 Differential Comparator .............................................................. 9 Register Map ................................................................................... 38 Active Load .................................................................................. 10 Details of Registers ......................................................................... 39 PMU ............................................................................................. 11 User Information ............................................................................ 41 External Sense (PMUS CHx) ................................................... 16 Power Supply Considerations ................................................... 41 DUTGND Input ......................................................................... 16 Truth Tables................................................................................. 41 Serial Peripheral Interface ......................................................... 16 Details of DACs vs. Levels ......................................................... 43 HVOUT Driver ........................................................................... 17 Recommended PMU Mode Switching Sequences................. 45 Overvoltage Detector (OVD) ................................................... 18 Block Diagrams ............................................................................... 47 16-Bit DAC Monitor MUX ....................................................... 18 Outline Dimensions ....................................................................... 51 Absolute Maximum Ratings .......................................................... 19 Ordering Guide .......................................................................... 51 REVISION HISTORY 10/2017Rev. B to Rev. C 4/2017Rev. 0 to Rev. A Changes to Table 1 ............................................................................ 4 Changes to Power Supplies Parameter, Table 1 ............................. 4 5/2017Rev. A to Rev. B 10/2008Revision 0: Initial Version Changes to Features Section............................................................ 1 Changes to Table 1 ............................................................................ 4 Changes to Normal Window Comparator Section ...................... 7 Changes to Table 7 .......................................................................... 12 Rev. C Page 2 of 51