ADIS16IMU4/PCBZ Breakout Board Wiki-Guide Analog Devices Wiki Analog.com EngineerZone AnalogDialogue Log In Wiki Resources and Tools Education Content Wiki Help Wiki Tools This version (21 Aug 2019 03:53) was approved by NevadaMark. The Previously approved version (21 Aug 2019 03:47) is available. ADIS16IMU4/PCBZ Breakout Board Table of Contents Wiki-Guide ADIS16IMU4/PCBZ Breakout Board Wiki-Guide GENERAL DESCRIPTION GENERAL DESCRIPTION The ADIS16IMU4/PCBZ is a kit of components that simplifies the process of connecting ADIS1646x ORDERING IMU products to an embedded processor development platform or to the EVAL-ADIS2 evaluation FEATURES system. This kit has four KEY components: interface board, stand-off, mounting hardware and a ribbon APPLICATIONS cable. PRODUCT SUPPORT KIT CONTENTS INTERFACE PCB DESIGN TOP-LEVEL BOARD VIEW SCHEMATIC Ribbon Cable Options DUT INSTALLATION CONNECTING TO THE EVAL- ADIS EVAL-ADIS JUMPER SETTINGS NOTE: The ADIS16IMU4/PCBZ kit DOES NOT include any of the IMU products that it supports. Those parts must be ordered separately. ORDERING Click here to order the ADIS16IMU4/PCBZ FEATURES * ADIS1646x-Compatible Breakout Board * 44mm x 47mm Interface Board Size * M2x0.4mm Mounting Hardware Kit * 7mm Spacer for flat surface interface * 16-pinm 12-inch Ribbon Cable * RoHS Compliant APPLICATIONS * Industrial Instrumentation * Robotics * Platform stabilization systems * Personnel tracking ADIS16IMU4/PCBZ Breakout Board Wiki-Guide Analog Devices Wiki PRODUCT SUPPORT The ADIS16IMU4/PCBZ provides support for the following IMU models: MODEL NUMBER ADIS16460AMLZ ADIS16465-1BMLZ ADIS16465-2BMLZ ADIS16465-3BMLZ ADIS16467-1BMLZ ADIS16467-2BMLZ ADIS16467-3BMLZ KIT CONTENTS DESCRIPTION PICTURE The Interface PCB contains two interface connectors. The first connector is a dual-row, 14-pin (27) socket that mates directly to IMUs from the ADIS1646x family. The second connector is a dual-row, 16-pin (28) header that easily connects to standard 1mm ribbon cable connectors, which provides a simple way to connect the ADIS1646x to an existing embedded processor system. The Spacer helps mount the Interface PCB to a flat surface by providing recess holes for mounting hardware that fastens the ADIS1646x to the Interface PCB. The Ribbon Cable connects to the 16-pin connector on the Interface PCB and provides a good starting point for connecting to an embedded process system. The M2 Hardware Kit includes (8) M2x0.4x14mm machine screws, (8) M2 washers and (8) M2x0.4mm nuts. These M2 hardware components help fasten the ADIS1646x to the interface PCB and the interface PCB to the test surface in a system INTERFACE PCB DESIGN TOP-LEVEL BOARD VIEW In the interface PCB size is approximately 44mm x 47mm and has a thickness of ~1.6mm (0.063). It has four mounting holes, located in each corner of the PCB, which have a basic diameter of 2.46mm and are located 2.2mm from each edge of the board. J1 is a 28 header with 2mm spacing, which supports standard 1mm ribbon cable connections. J2 is a 27 socket with 1mm spacing, which provides a direct connection to the Inertial Measurement Unit.