iSensor PC Evaluation System Preliminary Technical Data ADISEVAL GENERAL DESCRIPTION The software contains help files that describe each function of the software. The right button on the mouse has the ability to The ADISEVAL is a PC-based evaluation system for many of speed up changes when the Pointer is placed over titles, graph the iSensor products. It comes with a Parallel Interface axes and waveform data. Board, parallel interface cable, 2 12-pin ribbon cables, and the iSensor CD, which contains product documentation and See Figure 4 (ADIS16003, ADIS16006), Figure 5 (ADIS16080, evaluation software. ADIS16100), Figure 6 (ADIS16201), Figure 7 (ADIS16203), Figure 8 (ADIS16209) and Figure 9 (ADIS16250) for basic GETTING STARTED software assistance. Getting started with this system requires four simple steps. Table 1. Power Supply Hook-up J2 1. Connect J2 of the Parallel Interface Board (see Figure 1) to Pin Number Function the appropriate power supply, using Table 1. For simplicity, 1 Digital I/O Power Supply connect pin 1 to pin 4 and connect pin 2 to pin 3. Set the 2 Common voltage on the power supply per Table 2. Turn power off. 3 Common 2. Install the ADIS16XXX/PCBZ evaluation board on the 4 Sensor Power Supply Parallel Interface Board, using 2mm machine screws and NOTE: No reverse polarity protection provided. the two 12-pin ribbon cables, as shown in Figure 2. Make Table 2. Power Supply Voltages sure that these cables are aligned correctly on each header before applying power. Hook up the system to a PC using Evaluation Board Power Supply Voltage the parallel cable. ADIS16003/PCBZ +3.0 to +5.25V ADIS16006/PCBZ +3.0 to +5.25V 3. Locate the product-specific evaluation software on the ADIS16060/PCBZ +4.75 to +5.25V iSensor CD or download it from: ADIS16080/PCBZ +4.75 to +5.25V www.analog.com/isensor-evaluation . See Table 3 for a list ADIS16100/PCB +4.75 to +5.25V of products supported by each installation package. ADIS1620x/PCBZ +3.0 to +3.6V 4. Unpack the zip file and double click on the setup.exe file. ADIS1625x/PCBZ +4.75 to +5.25V Follow the prompts to install the software. Table 3. Evaluation Software 5. Go to the created directory. In most cases, this will be a Installation Package Filename Supported Products subdirectoy under C: ProgramFiles Analog Devices 003ES(x).zip ADIS16003 ADIS16006 ADIS16060 ADIS16080 iSensors . Double-click on the giveio.exe. Follow the ADIS16100 prompts to install this driver, which enables the parallel 201ES(x).zip ADIS16201 port communications in the PC. 203ES(x).zip ADIS16203 6. Double click on the ADIS*.exe file to start the software. 204ES(x).zip ADIS16024 209ES(x).zip ADIS16209 7. Click on Interface and select, Parallel. Enter the 250ES(x).zip ADIS16250 ADIS16251 address of the parallel port on the PC and click the OK ADIS16255 button. The parallel port address can be found under the ORDERING GUIDE Device Manager in Windows XP. Model Package Description ADISEVAL iSensor PC Evaluation System Rev. Pr.C Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Specifications subject to change without notice. No license is granted by implication Tel: 781.329.4700 www.analog.com or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. Fax: 781.326.8703 2008 Analog Devices, Inc. All rights reserved. ADISEVAL Pin 1 Figure 1 iSensor PC Interface Board Layout Rev. PrC Page 2 of 10