iSensor PC-USB Evaluation System Preliminary Technical Data ADISUSBZ GENERAL DESCRIPTION Step 4 - Install USB driver The ADISUSB is a PC-USB evaluation system that enables basic Connect the A-to-B USB cable to the PC, and then to the demonstration of many SPI-output iSensor products (sold ADISUSBZ PCB. The USB driver installation screen will separately). It provides 2mm screw holes for simple attachment automatically appear on the screen in a few seconds. Follow the of all iSensor products listed in Table 2, along with all prompts to install this driver. On some machines, the driver necessary cabling for connecting these devices to the USB port. installation screen will appear again, after clicking on Finish. This system provides sensor data on-demand, through the USB, In this case, follow the prompts and complete the process. Refer at read rates up to 900SPS. Since the USB ports are serviced by to Figure 7 and Figure 8 for the windows that will appear during their PCs interrupt structure, sampling in this system in not this step. Once complete, disconnect the cable from the perfectly coherent. However, in most PCs, the sample ADISUSBZ. coherence is sufficient for most datasheet parametric verification, including in-run bias stability. This system will Step 5 - Connect ADIS16xxx/PCB to USB Interface PCB run on MS Windows XP, NT, and 2000. Use the provided 2mm machine screws to secure the product under test. Refer to Figure 9 through Figure 12 for alignment Table 1. Kit Contents assistance. The ADIS16xxx/PVBZ parts also require the 12-pin 1 ADISUSBZ PCB ribbon cable installation displayed in these figures. 1 A-to-B USB Cable, 6 feet Table 2. JP1 Power Supply Settings 2 2mm stainless steel screws 1 12-pin, 2mm ribbon cable (ADIS16xxx/PCBZ) +3.3V +5V 1 iSensor Documentation CD ADIS16003/PCBZ ADIS16003/PCBZ ADIS16255/PCBZ GETTING STARTED QUICKLY ADIS16006/PCBZ ADIS16006/PCBZ ADIS16300AMLZ ADIS16201/PCBZ ADIS16080/PCBZ ADIS16350AMLZ Step 1 - Download software to PC ADIS16203/PCBZ ADIS16100/PCB ADIS16354AMLZ Go to www.analog.com/isensor-evaluation, click on Evaluation ADIS16204/PCBZ ADIS16250/PCBZ ADIS16355AMLZ Software Downloads, click on the appropriate software ADIS16209/PCBZ ADIS16251/PCBZ ADIS16365AMLZ package, and follow the prompts to save it to a temporary location on the local PC. The iSensor Documentation CD Note: If a product is listed twice, it can be run at +3.3 or +5V. provides software packages as well, but the iSensor Evaluation Step 6 - Launch evaluation software Tool web site provides the latest versions of each software Hook the ADISUSBZ to the USB cable and then launch the package. evaluation software by double clicking on its *.exe file. The Step 2 - Install evaluation software package program will also be in the Start Programs menu in Windows. Unzip the installation package to a temporary location, and Figure 15 though Figure 21 offers some basic insights into the then double-click on setup.exe, and follow the prompts. When operation of each products evaluation software. Note to asked to replace system files, click No, and the evaluation European users: some software is sensitive to the decimal software will still work fine. Refer to Figure 1, Figure 2, and notation. If large or unreasonable numbers are observed, Figure 3 for windows that will appear during this step. change the PCs regional setting to USA. Software packages are being updated to fix this, but were not complete at the time of Step 3 - Install giveio.exe driver this documents release. The giveio.exe driver is located in the softwares new directory, which is normally under a subdirectory called Analog Devices ORDERING GUIDE iSensor , located in the Program Files folder. Double-click on Model Package Description the file, giveio.exe, and follow the prompts to install this driver. Refer to Figure 4, Figure 5, and Figure 6 for windows that will ADISUSBZ iSensor PC-USB Evaluation System appear during this Step. Rev. PrA Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Specifications subject to change without notice. No license is granted by implication Tel: 781.329.4700 www.analog.com or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. Fax: 781.326.8703 2008 Analog Devices, Inc. All rights reserved. ADISUSBZ Preliminary Technical Data Figure 1. Installation Welcome Screen (Click OK) Figure 2. Installation Launch Screen (click on computer button) Rev. PrA Page 2 of 15