50 MHz to 4.0 GHz RF/IF Gain Block Data Sheet ADL5602 FEATURES FUNCTIONAL BLOCK DIAGRAM GND Fixed gain of 20 dB (2) Operation from 50 MHz to 4.0 GHz Highest dynamic range gain block ADL5602 Input/output internally matched to 50 Integrated bias control circuit BIAS OIP3 of 42.0 dBm at 2.0 GHz 1 2 3 P1dB of 19.3 dBm at 2.0 GHz RFIN GND RFOUT Noise figure of 3.3 dB at 2.0 GHz Figure 1. Single 5 V power supply Low quiescent current of 89 mA Thermally efficient SOT-89 package ESD rating of 1.5 kV (Class 1C) GENERAL DESCRIPTION The ADL5602 is a broadband 20 dB linear amplifier that operates The ADL5602 is fabricated on an InGaP HBT process and has at frequencies up to 4 GHz. The device can be used in a wide an ESD rating of 1.5 kV (Class 1C). The device is available in a variety of cellular, CATV, military, and instrumentation equipment. thermally efficient SOT-89 package. The ADL5602 provides the highest dynamic range available The ADL5602 consumes 89 mA on a single 5 V supply and is from an internally matched gain block. This is accomplished fully specified for operation from 40C to +85C. by providing extremely low noise figures and very high OIP3 A fully populated RoHS-compliant evaluation board is available. specifications simultaneously, across the entire 4 GHz frequency range. The ADL5602 provides a gain of 20 dB, which is stable over frequency, temperature, power supply, and from device to device. The device is internally matched to 50 at the input and output, making the ADL5602 very easy to implement in a wide variety of applications. Only input/output ac coupling capacitors, power supply decoupling capacitors, and an external inductor are required for operation. Rev. A Document Feedback Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. rights of third parties that may result from its use. Specifications subject to change without notice. No Tel: 781.329.4700 20092013 Analog Devices, Inc. All rights reserved. license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Technical Support www.analog.com Trademarks and registered trademarks are the property of their respective owners. 08190-001ADL5602 Data Sheet TABLE OF CONTENTS Features .............................................................................................. 1 Basic Connections .......................................................................... 12 Functional Block Diagram .............................................................. 1 Soldering Information and Recommended PCB Land Pattern ....................................................................... 12 General Description ......................................................................... 1 W-CDMA ACPR Performance .................................................... 13 Revision History ............................................................................... 2 Evaluation Board ............................................................................ 14 Specifications ..................................................................................... 3 Outline Dimensions ....................................................................... 15 Typical Scattering Parameters (S Parameters) .......................... 5 Ordering Guide .......................................................................... 15 Absolute Maximum Ratings ............................................................ 7 ESD Caution .................................................................................. 7 Pin Configuration and Function Descriptions ............................. 8 Typical Performance Characteristics ............................................. 9 REVISION HISTORY 11/13Rev. 0 to Rev. A Changes to Figure 2 ........................................................................... 8 Added Figure 15, Renumbered Sequentially ............................... 11 Changes to Figure 17 ....................................................................... 12 Updated Outline Dimensions ........................................................ 15 6/09Revision 0: Initial Version Rev. A Page 2 of 16