20 V, 200 mA, Low Noise, CMOS LDO Linear Regulator Data Sheet ADP7118 FEATURES TYPICAL APPLICATION CIRCUITS Low noise: 11 V rms independent of fixed output voltage ADP7118 V = 6V V = 5V PSRR of 88 dB at 10 kHz, 68 dB at 100 kHz, 50 dB at 1 MHz, IN OUT VIN VOUT C C V 5 V, V = 7 V OUT IN IN OUT 2.2F 2.2F Input voltage range: 2.7 V to 20 V SENSE/ADJ ON Maximum output current: 200 mA EN SS Initial accuracy: 0.8% GND C SS OFF 1nF Accuracy over line, load, and temperature 1.2% to +1.5%, T = 40C to +85C J Figure 1. ADP7118 with Fixed Output Voltage, 5 V 1.8%, T = 40C to +125C J Low dropout voltage: 200 mV (typical) at a 200 mA load, ADP7118 V = 7V V = 6V V = 5 V OUT IN OUT VIN VOUT User programmable soft start (LFCSP and SOIC only) C C IN 2k OUT 2.2F 2.2F SENSE/ADJ Low quiescent current, I = 50 A (typical) with no load GND 10k ON Low shutdown current: 1.8 A at V = 5 V, 3.0 A at V = 20 V IN IN EN SS Stable with a small 2.2 F ceramic output capacitor GND C SS OFF 1nF Fixed output voltage options: 1.8 V, 2.5 V, 3.3 V, 4.5 V, and 5.0 V 16 standard voltages between 1.2 V and 5.0 V are available Figure 2. ADP7118 with 5 V Output Adjusted to 6 V Adjustable output from 1.2 V to V V , output can be IN DO adjusted above initial set point Precision enable 2 mm 2 mm, 6-lead LFCSP, 8-Lead SOIC, 5-Lead TSOT APPLICATIONS Regulation to noise sensitive applications ADC and DAC circuits, precision amplifiers, power for VCO VTUNE control Communications and infrastructure Medical and healthcare Industrial and instrumentation Supported by ADIsimPower tool GENERAL DESCRIPTION The ADP7118 is a CMOS, low dropout (LDO) linear regulator Additional voltages available by special order are 1.5 V, 1.85 V, that operates from 2.7 V to 20 V and provides up to 200 mA of 2.0 V, 2.2 V, 2.75 V, 2.8 V, 2.85 V, 3.8 V, 4.2 V, and 4.6 V. output current. This high input voltage LDO is ideal for the Each fixed output voltage can be adjusted above the initial set regulation of high performance analog and mixed-signal circuits point with an external feedback divider. This allows the ADP7118 operating from 20 V down to 1.2 V rails. Using an advanced to provide an output voltage from 1.2 V to V V with high IN DO proprietary architecture, the device provides high power supply PSRR and low noise. rejection, low noise, and achieves excellent line and load transient User programmable soft start with an external capacitor is response with a small 2.2 F ceramic output capacitor. The available in the LFCSP and SOIC packages. ADP7118 regulator output noise is 11 V rms independent of the output voltage for the fixed options of 5 V or less. The ADP7118 is available in a 6-lead, 2 mm 2 mm LFCSP making it not only a very compact solution, but it also provides The ADP7118 is available in 16 fixed output voltage options. excellent thermal performance for applications requiring up to The following voltages are available from stock: 1.2 V (adjustable), 200 mA of output current in a small, low profile footprint. The 1.8 V, 2.5 V, 3.3 V, 4.5 V, and 5.0 V. ADP7118 is also available in a 5-lead TSOT and an 8-lead SOIC. Rev. D Document Feedback Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. rights of third parties that may result from its use. Specifications subject to change without notice. No Tel: 781.329.4700 20142018 Analog Devices, Inc. All rights reserved. license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. Technical Support www.analog.com 11849-001 11849-002ADP7118 Data Sheet TABLE OF CONTENTS Features .............................................................................................. 1 Theory of Operation ...................................................................... 13 Applications ....................................................................................... 1 Applications Information .............................................................. 14 Typical Application Circuits ............................................................ 1 ADIsimPower Design Tool ....................................................... 14 General Description ......................................................................... 1 Capacitor Selection .................................................................... 14 Revision History ............................................................................... 2 Programable Precision Enable .................................................. 15 Specifications ..................................................................................... 3 Soft Start ...................................................................................... 15 Input and Output Capacitance, Recommended Specifications ... 4 Noise Reduction of the ADP7118 in Adjustable Mode......... 16 Absolute Maximum Ratings ............................................................ 5 Effect of Noise Reduction on Start-Up Time ......................... 16 Thermal Data ................................................................................ 5 Current-Limit and Thermal Overload Protection ................. 17 Thermal Resistance ...................................................................... 5 Thermal Considerations ............................................................ 17 ESD Caution .................................................................................. 5 Printed Circuit Board Layout Considerations ............................ 20 Pin Configurations and Function Descriptions ........................... 6 Outline Dimensions ....................................................................... 22 Typical Performance Characteristics ............................................. 7 Ordering Guide .......................................................................... 23 REVISION HISTORY 4/2018Rev. C to Rev. D Changes to Features Section............................................................ 1 Updated Outline Dimensions ....................................................... 22 Changes to Ordering Guide .......................................................... 23 11/2016Rev. B to Rev. C Changes to Features Section and General Description Section ........ 1 Changes to Ordering Guide ..................................................................... 23 7/2016Rev. A to Rev. B Change to Table 5 ............................................................................. 6 Change to Figure 42 ....................................................................... 13 Changes to Programmable Precision Enable Section and Soft Start Section .................................................................................... 15 Added Effect of Noise Reduction on Start-Up Time Section ... 16 12/2014Rev. 0 to Rev. A Changes to Figure 36 to Figure 41 ................................................ 12 Changes to Figure 44 ...................................................................... 14 9/2014Revision 0: Initial Version Rev. D Page 2 of 23