Isolated Precision Half-Bridge Driver, 4 A Output Data Sheet ADuM3223/ADuM4223 FEATURES FUNCTIONAL BLOCK DIAGRAM 4 A peak output current ADuM3223/ Working voltage V 1 16 V IA ADuM4223 DDA High-side or low-side relative to input: 537 V peak 2 ENCODE DECODE 15 V V IB OA High-side to low-side differential: 800 V peak High frequency operation: 1 MHz maximum V 3 14 GND DD1 A 3.3 V to 5 V CMOS input logic GND 4 13 NC 1 4.5 V to 18 V output drive UVLO at 2.5 V V DISABLE 5 12 NC DD1 ADuM3223A/ADuM4223A UVLO at 4.1 V V DD2 6 11 NC V DDB ADuM3223B/ADuM4223B UVLO at 7.0 V V DD2 7 ENCODE DECODE 10 ADuM3223C/ADuM4223C UVLO at 11.0 V V NC V DD2 OB Precise timing characteristics V 8 9 GND DD1 B 54 ns maximum isolator and driver propagation delay NC = NO CONNECT 5 ns maximum channel-to-channel matching CMOS input logic levels Figure 1. High common-mode transient immunity: >25 kV/s GENERAL DESCRIPTION Enhanced system-level ESD performance per IEC 61000-4-x 1 The ADuM3223/ADuM4223 are 4 A isolated, half-bridge gate High junction temperature operation: 125C drivers that employ the Analog Devices, Inc., iCoupler technology Thermal shutdown protection to provide independent and isolated high-side and low-side Default low output outputs. The ADuM3223 provides 3000 V rms isolation in the Safety and regulatory approvals narrow body, 16-lead SOIC package, and the ADuM4223 provides ADuM3223 narrow-body, 16-lead SOIC 5000 V rms isolation in the wide body, 16-lead SOIC package. UL recognition per UL 1577 Combining high speed CMOS and monolithic transformer 3000 V rms for 1 minute SOIC long package technology, these isolation components provide outstanding CSA Component Acceptance Notice 5A performance characteristics superior to the alternatives, such as VDE certificate of conformity the combination of pulse transformers and gate drivers. DIN V VDE V 0884-10 (VDE V 0884-10):2006-12 V = 560 V peak IORM The ADuM3223/ADuM4223 isolators each provide two ADuM4223 wide-body, 16-lead SOIC independent isolated channels. They operate with an input UL recognition per UL 1577 supply ranging from 3.0 V to 5.5 V, providing compatibility with 5000 V rms for 1 minute SOIC long package lower voltage systems. In comparison to gate drivers employing CSA Component Acceptance Notice 5A high voltage level translation methodologies, the ADuM3223/ VDE certificate of conformity ADuM4223 offer the benefit of true, galvanic isolation between DIN V VDE V 0884-10 (VDE V 0884-10):2006-12 the input and each output. Each output may be continuously V = 849 V peak IORM operated up to 537 V peak relative to the input, thereby supporting Qualified for automotive applications low-side switching to negative voltages. The differential voltage between the high-side and low-side may be as high as 800 V peak. APPLICATIONS Switching power supplies As a result, the ADuM3223/ADuM4223 provide reliable control Isolated IGBT/MOSFET gate drives over the switching characteristics of IGBT/MOSFET configurations Industrial inverters over a wide range of positive or negative switching voltages. Automotive 1 Protected by U.S. Patents 5,952,849 6,873,065 7,075,239. Other patents pending. Rev. J Document Feedback Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. rights of third parties that may result from its use. Specifications subject to change without notice. No Tel: 781.329.4700 20122017 Analog Devices, Inc. All rights reserved. license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. Technical Support www.analog.com 10450-001ADuM3223/ADuM4223 Data Sheet TABLE OF CONTENTS Features .............................................................................................. 1 ESD Caution...................................................................................9 Applications ....................................................................................... 1 Pin Configuration and Function Descriptions ........................... 11 Functional Block Diagram .............................................................. 1 Typical Performance Characteristics ........................................... 12 General Description ......................................................................... 1 Applications Information .............................................................. 15 Revision History ............................................................................... 2 PC Board Layout ........................................................................ 15 Specifications ..................................................................................... 3 Propagation Delay-Related Parameters ................................... 15 Electrical Characteristics5 V Operation ................................ 3 Thermal Limitations and Switch Load Characteristics ......... 15 Electrical Characteristics3.3 V Operation ............................. 4 Output Load Characteristics ..................................................... 15 Package Characteristics ............................................................... 5 Boot-Strapped Half-Bridge Operation .................................... 16 Insulation and Safety-Related Specifications ............................ 5 DC Correctness and Magnetic Field Immunity........................... 16 Regulatory Information ............................................................... 6 Power Consumption .................................................................. 17 DIN V VDE V 0884-10 (VDE V 0884-10) Insulation Insulation Lifetime ..................................................................... 18 Characteristics .............................................................................. 7 Outline Dimensions ....................................................................... 19 Recommended Operating Conditions ...................................... 8 Ordering Guide .......................................................................... 20 Absolute Maximum Ratings ............................................................ 9 Automotive Products ................................................................. 20 REVISION HISTORY 8/2017Rev. I to Rev. J 12/2013Rev. B to Rev. C Added V to GND Negative TransientParameter, V to GND Change to Features Section .............................................................. 1 OA A OB B Changes to Switching Specifications Parameter, Table 1 ............. 3 Negative Transient Parameter, and Endnote 4, Table 11 .................... 9 Added Thermal Shutdown Temperatures Parameter, Table 1..... 3 3/2017Rev. H to Rev. I Changes to Switching Specifications Parameter, Table 2 ............. 4 Changes to Table 14 ........................................................................ 11 Added Thermal Shutdown Temperatures Parameter, Table 2..... 4 Changes to Table 10 .......................................................................... 8 1/2017Rev. G to Rev. H Change to Figure 13 Caption ........................................................ 13 Changes to Table 13 ........................................................................ 10 Changes to Thermal Limitations and Switch Load Characteristics Section .................................................................. 15 Change to Boot-Strapped Half-Bridge Operation Section ....... 16 11/2015Rev. F to Rev. G Changes to Power Consumption Section .................................... 17 5/2013Rev. A to Rev. B 7/2015Rev. E to Rev. F Added VDDA, VDDB Rise Time of 0.5 V/s Table 10 ....................... 8 Changes to Features Section............................................................ 1 Changes to Figure 22 ...................................................................... 16 Changes to Table 6 and Table 7 ....................................................... 6 Changes to Power Consumption Section .................................... 17 1/2013Rev. 0 to Rev. A Added Automotive Information (Throughout) ............................ 1 11/2014Rev. D to Rev. E Updated Safety and Regulatory Approvals (Throughout) ........... 1 Changes to Features Section and General Description Changed High-Side to Low-Side Differential from 700 VDC PEAK Section ................................................................................................ 1 to 800 V peak .....................................................................................1 Changes to Table 5 ............................................................................ 5 Added R , R Minimum and Maximum Values, Table 1 ......... 3 OA OB Changes to Regulatory Information Section, Table 6, and Added R , R Minimum and Maximum Values, Table 2 ......... 4 OA OB Table 7 ................................................................................................ 6 Changes to Table 13 ....................................................................... 10 Changes to Table 8 and Table 9 ....................................................... 7 Changes to Figure 19 ...................................................................... 15 Added Boot-Strapped Half Bridge Operation Section and 4/2014Rev. C to Rev. D Figure 22 Renumbered Sequentially ........................................... 16 Changes to Applications Section .................................................... 1 Changes to Ordering Guide .......................................................... 20 Changes to Insulation Lifetime Section ....................................... 18 Changes to Ordering Guide .......................................................... 20 5/2012Revision 0: Initial Version Rev. J Page 2 of 20