DC2511A Analog Devices

DEMO MANUAL DC2511A HSMC Adapter for DC890-Compatible Demo Boards DESCRIPTION Demonstration circuit 2511A is a gasket adapter board Design files for this circuit board are available at that allows DC890-compatible data converter eval boards DEMO MANUAL DC2511A QUICK START PROCEDURE DC2511 was designed to mate to the Arrow SoCkit board. SoCkits I/O voltage to 3.3V by placing the JP2 jumper DC2511 may work with other HSMC-compatible FPGA on the SoCkit board in the 3.3V position (closest to the boards, but the pin connections and voltages should be edge of the board). Mate the ADC demo board to P2 on verified. DC2511. Observe proper power-sequencing: the best practice is to power up the SoCkit before applying power Carefully mate the HSMC connector on the reverse side of to the ADC demo board. the DC2511 to the SoCkit board. Use high-quality, 5mm spacers such as Harwin R30-6200514, and M3 12 or A complete example of a typical evaluation setup is covered 4-40 1/2 pan-head screws. in the blog, Data Converter Evaluation with the Arrow/ Altera SoCkit FPGA board: Most FPGA loads intended for use with the DC2511 require 3.3V I/O voltage. Unless the test script or other