DC2512A Analog Devices

DEMO MANUAL DC2512A HSMC Adapter for DC718- Compatible Demo Boards DESCRIPTION Demonstration circuit 2512A is a gasket adapter board that Design files for this circuit board are available at allows DC718-compatible data converter eval boards to DEMO MANUAL DC2512A QUICK START PROCEDURE DC2512A was designed to mate to the Arrow SoCkit board. SoCkits I/O voltage to 3.3V by placing the JP2 jumper DC2512A may work with other HSMC-compatible FPGA on the SoCkit board in the 3.3V position (closest to the boards, but the pin connections and voltages should be edge of the board). Mate the ADC demo board to J1 on verified. DC2512A. Observe proper power-sequencing: the best practice is to power up the SoCkit before applying power Carefully mate the HSMC connector on the reverse side of to the ADC demo board. the DC2512A to the SoCkit board. Use high-quality, 5mm spacers such as Harwin R30-6200514, and M3 12 or A complete example of a typical evaluation setup is covered 4-40 1/2 pan-head screws. in the blog, Data Converter Evaluation with the Arrow / Altera SoCkit FPGA board: Most FPGA loads intended for use with the DC2512A require 3.3V I/O voltage. Unless the test script or other