LTC7001 Fast 150V High Side NMOS Static Switch Driver FEATURES DESCRIPTION n Wide Operating V : Up to 135V (150V Abs Max) The LTC 7001 is a fast high side N-channel MOSFET gate IN n 1 Pull-Down, 2.2 Pull-Up for Fast Turn-On and driver that operates from input voltages up to 135V. It Turn-Off Times with 35ns Propagation Delays contains an internal charge pump that fully enhances an n Internal Charge Pump for 100% Duty Cycle external N-channel MOSFET switch, allowing it to remain n Adjustable Turn-On Slew Rate on indefinitely. n Gate Driver Supply from 3.5V to 15V Its powerful driver can easily drive large gate capacitances n Adjustable V Overvoltage Lockout IN with very short transition times, making it well suited for n Adjustable Driver Supply V Undervoltage Lockout CC both high frequency switching applications or static switch n CMOS Compatible Input applications that require a fast turn-on and/or turn-off time. n Thermally Enhanced, High Voltage Capable 10-Lead The LTC7001 is available in the thermally enhanced 10-lead MSOP Package n MSOP package. AEC-Q100 Qualified for Automotive Applications All registered trademarks and trademarks are the property of their respective owners. APPLICATIONS n Static Switch Driver n Load and Supply Switch Driver n Electronic Valve Driver n High Frequency High Side Gate Driver TYPICAL APPLICATION High Voltage, High Side Switch with 100% Duty Cycle LTC7001 Driving a 1nF Capacitive Load V IN 0V TO 135V V CC V INP V TGUP CC 3.5V TO 15V 2V/DIV LTC7001 TGDN OFF ON INP BST V 0.1F V CCUV TG-TS 5V/DIV LOAD OVLO TS 0V TO 135V GND 7001 TA01a 7001 TA01b 10ns/DIV Rev. G 1 Document Feedback For more information www.analog.comLTC7001 ABSOLUTE MAXIMUM RATINGS PIN CONFIGURATION (Note 1) Supply Voltages TOP VIEW BST-TS ................................................... 0.3V to 15V V 1 10 NC CC V 2 9 BST CCUV 11 V ......................................................... 0.3V to 15V CC GND 3 8 TS GND INP 4 7 TGUP TS Voltage .................................................. 6V to 150V OVLO 5 6 TGDN BST Voltage ............................................ 0.3V to 150V MSE PACKAGE 10-LEAD PLASTIC MSOP INP Voltage ................................................... 6V to 15V T = 150C, = 45C/W, = 10C/W JMAX JA JC Driver Outputs TGUP, TGDN ............................... (Note 6) EXPOSED PAD (PIN 11) IS GND, MUST BE SOLDERED TO PCB V Voltage ................................................ 0.3 to 6V CCUV OVLO Voltage .............................................. 0.3V to 6V Operating Junction Temperature Range (Notes 2, 3, 4) LTC7001E, LTC7001I, ........................ 40C to 125C LTC7001J, LTC7001H, ........................ 40C to 150C LTC7001MP ....................................... 55C to 150C Storage Temperature Range .................. 65C to 150C Lead Temperature (Soldering, 10 sec) MSOP Package .................................................300C ORDER INFORMATION LEAD FREE FINISH TAPE AND REEL PART MARKING* PACKAGE DESCRIPTION TEMPERATURE RANGE LTC7001EMSE PBF LTC7001EMSE TRPBF LTGXD 10-Lead Plastic MSOP 40C to 125C LTC7001IMSE PBF LTC7001IMSE TRPBF LTGXD 10-Lead Plastic MSOP 40C to 125C LTC7001JMSE PBF LTC7001JMSE TRPBF LTGXD 10-Lead Plastic MSOP 40C to 150C LTC7001HMSE PBF LTC7001HMSE TRPBF LTGXD 10-Lead Plastic MSOP 40C to 150C LTC7001MPMSE PBF LTC7001MPMSE TRPBF LTGXD 10-Lead Plastic MSOP 55C to 150C AUTOMOTIVE PRODUCTS** LTC7001EMSE WPBF LTC7001EMSE WTRPBF LTGXD 10-Lead Plastic MSOP 40C to 125C LTC7001IMSE WPBF LTC7001IMSE WTRPBF LTGXD 10-Lead Plastic MSOP 40C to 125C LTC7001JMSE WPBF LTC7001JMSE WTRPBF LTGXD 10-Lead Plastic MSOP 40C to 150C LTC7001HMSE WPBF LTC7001HMSE WTRPBF LTGXD 10-Lead Plastic MSOP 40C to 150C Contact the factory for parts specified with wider operating temperature ranges. *The temperature grade is identified by a label on the shipping container. Tape and reel specifications. Some packages are available in 500 unit reels through designated sales channels with TRMPBF suffix. **Versions of this part are available with controlled manufacturing to support the quality and reliability requirements of automotive applications. These models are designated with a W suffix. Only the automotive grade products shown are available for use in automotive applications. Contact your local Analog Devices account representative for specific product ordering information and to obtain the specific Automotive Reliability reports for thesemodels. Rev. G 2 For more information www.analog.com