Request Security User Guide and Full Developer Software Click here to ask about the production status of specific part numbers. Evaluates: DS28C40 DS28C40 Evaluation System Lite Version Fully Compliant with USB Specification v2.0 General Description Software Runs on Windows 10, Windows 8, and The DS28C40 evaluation system (EV system) provides the Windows 7 for Both 64- and 32-Bit Versions hardware and software necessary to exercise the features 2 3.3V 3% I C Operating Voltage of the DS28C40. The EV system consists of five DS28C40 devices in a 10-pin TDFN package, a DS9121ATB+ Convenient On-Board Test Points, TDFN Socket evaluation TDFN socket board, and a DS9481P-300 Evaluation Software Available by Request 2 USB-to-I C/1-Wire adapter. The evaluation software runs under Windows 10, Windows 8, and Windows 7 EV Kit Contents operating systems, both 64- and 32-bit versions. It pro- QTY DESCRIPTION vides a handy user interface to exercise the features of the DS28C40. DS28C40ATB/VY+ DeepCover secure 5 authenticator (10 TDFN) Features 1 DS9121ATB+ socket board (10 TDFN) Demonstrates the Features of the DS28C40 2 1 DS9481P-300 USB to 1W/I C Adapter DeepCover Secure Authenticator 2 Logs 1-Wire/I C Communication to Aid Firmware 1 USB Type-A to USB Mini Type-B cable Designers Understanding of DS28C40 2 1-Wire/I C USB Adapter Creates a Virtual COM Port Ordering Information appears at end of data sheet. on Any PC DS28C40 EV System with a USB Cable DeepCover is a registered trademark of Maxim Integrated Products, Inc. Windows is registered trademarks of Microsoft Corp. Windows is a registered trademark and registered service mark of Microsoft Corporation. 319-100391 Rev 3 3/21Evaluates: DS28C40 DS28C40 Evaluation System Lite Version version) or request full DS28C40/DS28E40 EV kit Quick Start developer software. This section is intended to give the DS28C40 evaluator a Note: In the following sections, EV kit software related list of recommended equipment and instructions on how to set up the Windows-based computer for the evaluation items are identified in bold. Windows operating system related items are identified in bold and underline. software. Recommended Equipment Hardware Setup and Driver Installation Quick Start 2 DS9481P-300 USB to 1W/I C Adapter The following steps were performed on a Windows 10 PC DS9121ATB+ TDFN socket board to setup the DS28C40 EV kit hardware/software: DS28C40ATB/VY+ (five devices included) 1) Obtain and unpack DS28C40 DS28E40 Evalua- USB Type A-to-USB Micro-Type B cable (included) tion Kit Lite Version Setup file or newer version. Computer with a Windows 10, Windows 8, or 2) In a file viewer, double click on the DS28C40 Windows 7 operating system (64- or 32-bit) and a DS28E40 Evaluation Kit Lite Version Setup to spare USB 2.0 or higher port begin the installation. Download DS28C40/DS28C40 EV kit software (light Figure 1. File Viewer Maxim Integrated 2 www.maximintegrated.com