Evaluates: DS28E05 DS28E05 Evaluation Kit General Description Quick StartDriver Installation The DS28E05 evaluation system (EV system) See Figure 1 for a photo of the stand-alone EV board with provides the hardware and software necessary to RJ11 cable and Figure 2 for a photo of the 1-Wire adapter evaluate the DS28E05 1-Wire EEPROM. The hardware with USB cable that plugs into the PC. consists of an evaluation board (DS9120P) with RJ11 Required Equipment cable, a Maxim 1-Wire adapter module (DS9481R-3C7) DS9481R-3C7 1-Wire adapter with USB cable that connects the board to the PC, and a DS28E05 in a TSOC package. All three hardware components are DS9120P EV board with RJ11 cable listed in Table 1. DS28E05 in a TSOC package The DS28E05 features 112 bytes of user memory PC with a Windows 8, Windows 7, Windows Vista, or organized as seven pages of 16 bytes. Each page can be Windows XP operating system and a spare USB port write-protected or set into EPROM emulation mode. The evaluation software runs under Windows 8, Windows 7, Windows Vista , or Windows XP , providing a handy user interface to exercise the features of the DS28E05. The evaluation software is available for download. Features Driver Support for Windows 8, Windows 7, Windows Vista, and Windows XP Fully Compliant with USB Specification v2.0 USB Powered with No External Power Supply Required USB to 1-Wire Adapter Utilizes Both the Prolific PL-2303HXD and the Maxim DS2480B Emulator to Create a Virtual COM-to-1-Wire Port on Any PC Accommodates TSOC Package IC Figure 1. DS9120P EV Board with RJ11 Cable Table 1. Required Hardware for PC Evaluation PART QTY DESCRIPTION DS9120P+ 1 EV board with RJ11 cable 1-Wire USB adapter with USB DS9481R-3C7+ 1 cable DS28E05+ 5 in a TSOC package +Denotes a lead(Pb)-free/RoHS-compliant package. Figure 2. DS9481R-3C7 1-Wire USB Adapter with USB Cable 1-Wire is a registered trademark of Maxim Integrated Products, Inc. Windows, Widows Vista, and Windows XP are registered trade- Ordering Information appears at end of data sheet. marks and registered service marks of Microsoft Corporation. 19-7489 Rev 0 1/15Evaluates: DS28E05 DS28E05 Evaluation Kit Note: In the following sections, software-related items are load and install the 1-Wire Drivers software package. identified by bolding. Text in bold refers to items directly 8) When prompted with the question Do you want to from the EV kit software. Text in bold and underlined run or save this file , select Run. refers to items from the Windows operating system. 9) When you get a security warning that asks Do you want to run the software , select Run. Procedure The EV kit is fully assembled and tested. Before 10) Read and check the box if you accept the license connecting to the PC, follow the steps below to verify agreement and click Install. Click the Finish button board operation: to exit the Setup Wizard. 1) Insert the DS28E05 in the TSOC socket on the 11) Microsoft .NET Framework Version 3.5 SP1 or newer DS9120P EV board. is required for the program to run. To check whether it is installed, look in the Control Panel under Pro- 2) Connect the DS9120P EV board to the grams and Features. If .NET is not listed, it is not DS9481R-3C7 1-Wire adapter with the RJ11 cable. installed. For download and installation instructions, 3) Do not insert the DS9481R-3C7 into the PC at this go to www.microsoft.com/en-us/download/details. time. This should be done in step 12, after all driver aspx id=22. software is installed. 12) Insert the DS9481R-3C7 into a spare USB port on 4) To install the PL-2303HX Prolific Driver (for the the PC. DS9481R-3C7), visit