19-4879 Rev 8/09 DS9105 iButton Number Set www.maxim-ic.com FEATURES EXAMPLES OF ACCESSORIES DS1982-based iButtons branded with their DS9096P Self-Stick Adhesive Pad respective character for optimum legibility DS9092GT iButton Wand DS9097U COM-Port Adapter 128 bytes of user-programmable EPROM in DS9106 iButton Halos each iButton for maximum flexibility DS9093RA iButton Lock Ring DS9093RB iButton Flange Enlargement Available as set of 12 (as shown in the graphic) or as individual iButtons ORDERING INFORMATION PART TYPE DS9105-SET COMPLETE SET OF 12 DS9105-000 NUMBER ZERO DS9105-001 NUMBER ONE DS9105-002 NUMBER TWO DS9105-003 NUMBER THREE DS9105-004 NUMBER FOUR DS9105-005 NUMBER FIVE DS9105-006 NUMBER SIX DS9105-007 NUMBER SEVEN DS9105-008 NUMBER EIGHT DS9105-009 NUMBER NINE DS9105-00C CLEAR DS9105-00E ENTER Denotes a RoHS-compliant device that may include lead(Pb) that is exempt under the RoHS requirements. DESCRIPTION Unlike conventional keypads, where data is entered by pressing a mechanical key, the solid buttons of an iButton keypad allow users to enter data by simply touching each button with an iButton probe or handheld computer. Each of these buttons comes from the factory with blank memory, allowing the user to program each button with whatever data the user would like entered when touched. The iButton keypad is a simple, robust alternative for data entry in harsh environments such as outdoors, industrial workplaces and other locations, where a normal keypad is impractical to operate. Since iButtons are made from stainless steel, this keypad is easily cleaned with hot water and detergent. The individual iButtons that comprise the keypad can be arranged as desired to maximize ease of use. They can be stuck on a smooth surface using adhesive pads or mounted through 16.5mm holes in a rigid material and fastened by lock rings. The material thickness should not exceed 3.0mm. For a detailed description of the communication protocol and the electrical characteristics of the iButton used in this keypad, refer to the DS1982 data sheet. iButton is a registered trademark of Maxim Integrated Products, Inc. 1 of 2 DS9105 REVISION HISTORY REVISION PAGES DESCRIPTION DATE CHANGED 8/09 Added RoHS-compliance indicators to the Ordering Information table. 1 2 of 2 Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 2009 Maxim Integrated Products Maxim is a registered trademark of Maxim Integrated Products, Inc.