DS9122P# Analog Devices

DS9488-GP8/DS9122x Multi-Device Programmer for 2 Evaluation System 1-Wire and I C Devices General Description Benefits and Features The DS9488-GP8 multi-device programmer for 1-Wire Programs Up to 8 Devices in a Single Session 2 and I C devices simultaneously programs up to 8 devices Multiple Devices Supported by One Programmer 2 that use the 1-Wire or I C bus programming interface. Socket Adapters Available for Most Devices A variety of socket adapters (DS9122 series) allows one programmer to support multiple IC types. Software plugins Easily Add Support for New Devices for every supported device are quickly and easily installed. Intuitive Windows Application Reduces Learning Time LED status indicators immediately identify the pass/fail Standard USB Interface Connects to Any Computer status of individual devices. Status LEDs Provide Immediate Pass/Fail Configuration settings allow access to device-specific fea- Confirmation tures such as memory protection, read/write permissions, authentication, etc. These can be store as a configuration EV System Contents profile and automatically loaded in subsequent program- DS9488-GP8 programmer board ming sessions. USB A to USB Micro-B cable A USB interface connects the programmer to any com- puter. A convenient Windows application allows for easy operation of the programmer. Available socket adapters allow the DS9488-GP8 to pro- gram a variety of Maxim devices. The Ordering Information lists the socket adapters and the devices they support. DS9488-GP8 Programmer 1-Wire is a registered trademark of Maxim Integrated Products, Inc. Ordering Information appears at end of data sheet. Windows is a registered trademark and registered service mark of Microsoft Corporation. 19-7813 Rev 1 5/16DS9488-GP8/DS9122x Multi-Device Programmer for 2 Evaluation System 1-Wire and I C Devices Selecting Socket Adapters Setup One to eight socket adapters matching the IC packages Required Equipment must be purchased separately from Maxim before the pro- Computer equipped with Windows and .NET grammer can be used. No socket adapters are included Framework 4.5 or later with the DS9488-GP8. DS9488-GP8 programmer board Most socket adapters program a single device at a time USB A to USB Micro-B cable and take up one socket site. Dual socket adapters cover two socket sites, but each IC has a dedicated set of status One to eight socket adapters for the intended ICs LEDs on the PCB as shown in Figure 1. One to eight ICs to be programmed The socket adapters employ ESD-sensitive components. Observe safe ESD practices when handling the socket adapters. Figure 1. Single and Dual IC Socket Adapters Maxim Integrated 2 www.maximintegrated.com