EVAL-SDP-CH1Z Analog Devices

SDP User Guide UG-502 One Technology Way P.O. Box 9106 Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 Fax: 781.461.3113 www.analog.com SDP-H1 Controller Board INTRODUCTION This user guide describes the EVAL-SDP-CH1Z system The SDP-H1 board is designed to be used in conjunction with demonstration platform-high speed (SDP-H1) controller board various Analog Devices component evaluation boards and from Analog Devices, Inc. The SDP-H1 controller board is part Circuits From The Lab reference circuits as part of a customer of the Analog Devices system demonstration platform (SDP). evaluation environment. The SDP-H1 provides USB connectiv- The SDP consists of a series of controller boards, interposer ity through a USB 2.0 high speed connection to the computer boards, and daughter boards. allowing users to evaluate components on this platform from a PC application. The SDP-H1 has a Xilinx Spartan-6 FPGA and SDP controller boards provide a means of communicating with an ADSP-BF527 Blackfin processor. The Xilinx Spartan-6 the PC from the system under evaluation. Interposer boards FPGA connects to an FMC low pin count (LPC) connector. route signals between two connectors. Daughter boards are a This connector provides power to the daughter board (see the collection of product evaluation boards and Circuits From The Power section for more details) and LVDS and LVCMOS signal Lab (CFTL) reference circuit boards. The SDP-H1 is used as support. The Blackfin processor peripherals communication part of the evaluation system for many Analog Devices compo- lines are available through an SDP 120-pin small footprint nents and reference circuits. The primary audience for this user connectors. The Blackfin processor also provides the USB guide is a system engineer who seeks to understand how to set controller for the board and allows the user to configure up the SDP-H1 board and begin USB communications to the PC. the FPGA. The SDP-H1 user guide provides instructions for installing the SDP-H1 hardware (EVAL-SDP-CH1Z board) and software onto your computer. The necessary installation files are provided with the evaluation daughter board package. The Getting Started section provides software and hardware installation procedures, PC system requirements, and basic board informa- tion. The Hardware Description section provides information on the EVAL-SDP-CH1Z components. The EVAL-SDP-CH1Z schematics are provided in the Schematics section. PLEASE SEE THE LAST PAGE FOR AN IMPORTANT WARNING AND LEGAL TERMS AND CONDITIONS. Rev. 0 Page 1 of 32 UG-502 SDP User Guide TABLE OF CONTENTS Introduction ...................................................................................... 1 Powering Up/Powering Down the SDP .....................................4 Revision History ............................................................................... 2 Hardware Description.......................................................................5 Product Overview ............................................................................. 3 LEDs ................................................................................................5 Technical or Customer Support.................................................. 3 SDP Connector Details .................................................................5 Product Information .................................................................... 3 FMC Connector Details ............................................................ 10 Regulatory Compliance ............................................................... 3 SMA Connectors ........................................................................ 15 Getting Started .................................................................................. 4 Power............................................................................................ 15 Package Contents .......................................................................... 4 Mechanical Specifications ......................................................... 15 PC Configuration ......................................................................... 4 Schematics ....................................................................................... 17 USB Installation ............................................................................ 4 REVISION HISTORY 4/13Revision 0: Initial Version Rev. 0 Page 2 of 32