LT3065 Series 45V V , 500mA Low Noise, IN Linear Regulator with Programmable Current Limit and Power Good FEATURES DESCRIPTION n Input Voltage Range: 1.6V to 45V The LT 3065 Series are micropower, low noise, low dropout n Output Current: 500mA voltage (LDO) linear regulators that operate over a 1.6V n Dropout Voltage: 300mV to 45V input voltage range. The devices supply 500mA of n Programmable Precision Current Limit: 10% output current with a typical dropout voltage of 300mV. A n Power Good Flag single external capacitor provides programmable low noise n Low Noise: 25V (10Hz to 100kHz) reference performance and output soft-start functionality. RMS n Adjustable Output (V = V = 600mV) REF OUT(MIN) A single external resistor programs the LT3065s current n Output Tolerance: 2% Over Line, Load and limit, accurate to 10% over a wide input voltage and tem- Temperature perature range. A PWRGD flag indicates output regulation. n Stable with Low ESR, Ceramic Output Capacitors The LT3065 optimizes stability and transient response (3.3F Minimum) n with low ESR ceramic capacitors, requiring a minimum of Single Capacitor Soft-Starts Reference and Lowers 3.3F. Internal protection circuitry includes current limiting Output Noise n with foldback, thermal limiting, reverse battery protection, Current Limit Foldback Protection n reverse current protection and reverse output protection. Shutdown Current: <1A n Reverse Battery and Thermal Limit Protection The LT3065 is available in fixed output voltages of 1.2V, n 10-Lead 3mm 3mm DFN and 12-lead MSOP Packages 1.5V, 1.8V, 2.5V, 3.3V, and 5V, and as an adjustable de- n AEC-Q100 Qualified for Automotive Applications vice with an output voltage range from 0.6V to 40V. The LT3065 is available in the thermally-enhanced 10-lead APPLICATIONS 3mm 3mm DFN and 12-lead MSOP packages. n All registered trademarks and trademarks are the property of their respective owners. Battery-Powered Systems n Automotive Power Supplies n Industrial Power Supplies n Avionic Power Supplies n Portable Instruments Precision Current Limit, R = 1.5k TYPICAL APPLICATION IMAX 220 V = 5V OUT(NOMINAL) 5V Supply with 200mA Precision Current Limit 216 212 5V 5.6V TO 13V OUT IN OUT 208 IN 200mA LT3065-5 V = 10V IN 3.3F 1nF 3.3F 204 500k SHDN SENSE 200 V = 5.6V IN PWRGD ADJ 196 192 REF/BYP I MAX GND 188 10nF 22nF 1.5k 184 3065 TA01a 180 75 50 25 0 25 50 75 100 125 150 175 TEMPERATURE (C) 3065 TA01b Rev. F 1 Document Feedback For more information www.analog.com CURRENT LIMIT (mA)LT3065 Series ABSOLUTE MAXIMUM RATINGS (Note 1) IN Pin Voltage .........................................................50V Output Short-Circuit Duration .......................... Indefinite OUT Pin Voltage ........................................... +40V, 50V Operating Junction Temperature Range (Notes 3, 5, 14) Input-to-Output Differential Voltage (Note 2) ..+50V, 40V E-, I-Grades ....................................... 40C to 125C ADJ Pin Voltage ......................................................50V MP-Grade .......................................... 55C to 150C SENSE Pin Voltage ..................................................50V H-Grade ............................................. 40C to 150C SHDN Pin Voltage ...................................................50V Storage Temperature Range .................. 65C to 150C PWRGD Pin Voltage .......................................0.3V, 50V Lead Temperature (Soldering, 10 sec) I Pin Voltage ..............................................0.3V, 7V MSOP Package Only .........................................300C MAX REF/BYP Pin Voltage ...................................................1V PIN CONFIGURATION TOP VIEW TOP VIEW 1 IN 1 10 OUT IN 12 OUT 2 OUT IN 11 IN 9 OUT 2 SHDN 3 10 ADJ/SENSE* 13 11 3 SHDN 8 ADJ/SENSE* PWRGD 4 GND 9 GND/ADJ* GND 4 PWRGD 7 GND/ADJ* I 5 8 REF/BYP MAX NC 6 7 NC I 5 6 REF/BYP MAX MSE PACKAGE DD PACKAGE 12-LEAD PLASTIC MSOP 10-LEAD (3mm 3mm) PLASTIC DFN T = 150C, = 28C/W, = 6C/W JMAX JA JC T = 150C, = 31C/W, = 9C/W JMAX JA JC EXPOSED PAD (PIN 13) IS GND, MUST BE SOLDERED TO PCB EXPOSED PAD (PIN 11) IS GND, MUST BE SOLDERED TO PCB *Pin 7: GND for LT3065, ADJ for LT3065-1.2, LT3065-1.5, LT3065-1.8, LT3065-2.5, *Pin 9: GND for LT3065, ADJ for LT3065-1.2, LT3065-1.5, LT3065-1.8, LT3065-2.5, LT3065-3.3, LT3065-5 LT3065-3.3, LT3065-5 *Pin 8: ADJ for LT3065, SENSE for LT3065-1.2, LT3065-1.5, LT3065-1.8, LT3065-2.5, *Pin 10: ADJ for LT3065, SENSE for LT3065-1.2, LT3065-1.5, LT3065-1.8, LT3065-2.5, LT3065-3.3, LT3065-5 LT3065-3.3, LT3065-5 ORDER INFORMATION LEAD FREE FINISH TAPE AND REEL PART MARKING* PACKAGE DESCRIPTION TEMPERATURE RANGE LT3065EDD PBF LT3065EDD TRPBF LGKS 10-Lead (3mm x 3mm) Plastic DFN 40C to 125C LT3065IDD PBF LT3065IDD TRPBF LGKS 10-Lead (3mm x 3mm) Plastic DFN 40C to 125C LT3065HDD PBF LT3065HDD TRPBF LGKS 10-Lead (3mm x 3mm) Plastic DFN 40C to 150C LT3065MPDD PBF LT3065MPDD TRPBF LGKS 10-Lead (3mm x 3mm) Plastic DFN 55c to 150C LT3065EDD-1.2 PBF LT3065EDD-1.2 TRPBF LGQV 10-Lead (3mm x 3mm) Plastic DFN 40C to 125C LT3065IDD-1.2 PBF LT3065IDD-1.2 TRPBF LGQV 10-Lead (3mm x 3mm) Plastic DFN 40C to 125C LT3065HDD-1.2 PBF LT3065HDD-1.2 TRPBF LGQV 10-Lead (3mm x 3mm) Plastic DFN 40C to 150C LT3065MPDD-1.2 PBF LT3065MPDD-1.2 TRPBF LGQV 10-Lead (3mm x 3mm) Plastic DFN 55C to 150C LT3065EDD-1.5 PBF LT3065EDD-1.5 TRPBF LGQW 10-Lead (3mm x 3mm) Plastic DFN 40C to 125C LT3065IDD-1.5 PBF LT3065IDD-1.5 TRPBF LGQW 10-Lead (3mm x 3mm) Plastic DFN 40C to 125C LT3065HDD-1.5 PBF LT3065HDD-1.5 TRPBF LGQW 10-Lead (3mm x 3mm) Plastic DFN 40C to 150C LT3065MPDD-1.5 PBF LT3065MPDD-1.5 TRPBF LGQW 10-Lead (3mm x 3mm) Plastic DFN 55C to 150C LT3065EDD-1.8 PBF LT3065EDD-1.8 TRPBF LGQX 10-Lead (3mm x 3mm) Plastic DFN 40C to 125C LT3065IDD-1.8 PBF LT3065IDD-1.8 TRPBF LGQX 10-Lead (3mm x 3mm) Plastic DFN 40C to 125C Rev. F 2 For more information www.analog.com