LTC1928ES6-5#TRM Analog Devices

LTC1928-5 Doubler Charge Pump with Low Noise Linear Regulator in ThinSOT FEATURES DESCRIPTION n Low Output Noise: 90V (100kHz BW) The LTC 1928-5 is a doubler charge pump with an internal RMS n Fixed Output Voltage: 5V low noise, low dropout (LDO) linear regulator. The part is n Input Voltage Range: 2.7V to 4.4V designed to provide a low noise boosted supply voltage for n No Inductors Required powering noise sensitive devices such as high frequency n Uses Small Ceramic Capacitors VCOs in wireless applications. n Output Current Up to 30mA An internal charge pump converts a 2.7V to 4.4V input to a n 550kHz Switching Frequency boosted output, while the internal LDO regulator converts n Low Operating Current: 190A the boosted voltage to a low noise regulated output. The n Low Shutdown Current: 4A regulator is capable of supplying up to 30mA of output n Internal Thermal Shutdown and Current Limiting current. Shutdown reduces the supply current to <8A, n Low Profile (1mm) ThinSOT Package removes the load from V by disabling the regulator and IN discharges V to ground through a 200 switch. OUT APPLICATIONS The LTC1928-5 LDO regulator is stable with only 2F on n VCO Power Supplies for Cellular Phones the output. Small ceramic capacitors can be used, reduc- n 2-Way Pagers ing PC board area. n Wireless PCMCIA Cards The LTC1928-5 is short-circuit and overtemperature pro- n Portable Medical Instruments tected. The part is available in a 6-pin low profile (1mm) n Low Power Data Acquisition ThinSOT package. n Remote Transmitters L, LT, LTC, LTM, Linear Technology and the Linear logo are registered trademarks and n White LED Drivers ThinSOT and Burst Mode are trademarks of Linear Technology Corporation. All other trademarks are the property of their respective owners. n GaAs Switches TYPICAL APPLICATION Output Noise (BW = 10Hz to 2.5MHz) LTC1928-5 5V V 3 1 IN V V V OUT IN OUT 2.7V TO 4.4V V 4.7F 4 OUT 5 4.7F CP CPO 200V/DIV 0.47F 4.7F 2 6 CN/SHDN GND 19285 F01 Figure 1. Low Noise 5V Power Supply 19285 TA01 C = C = 4.7F 100s/DIV CPO OUT I = 10mA OUT V = 3V IN V = 5A OUT T = 25C A 19285fa 1 For more information www.linear.com/LTC 1928-5LTC1928-5 ABSOLUTE MAXIMUM RATINGS PIN CONFIGURATION (Note 1) V to Ground ............................................... 0.3V to 5V IN V Voltage ........................................... 0.3V to 5.25V OUT TOP VIEW CPO to Ground ..........................................................10V V 1 6 CN/SHDN IN CN/SHDN to Ground ..................... 0.3V to (V + 0.3V) IN GND 2 5 CP V Short-Circuit Duration ............................. Indefinite V 3 4 CPO OUT OUT I ........................................................................40mA OUT S6 PACKAGE 6-LEAD PLASTIC SOT-23 Operating Temperature Range (Note 2)....40C to 85C T = 125C, = 230C/W JMAX JA Maximum Junction Temperature ........................ 125C Storage Temperature Range .................. 65C to 150C Lead Temperature (Soldering, 10 sec) ...................300C ORDER INFORMATION LEAD FREE FINISH TAPE AND REEL PART MARKING PACKAGE DESCRIPTION TEMPERATURE RANGE LTC1928ES6-5 PBF LTC1928ES6-5 TRPBF LTKT 6-Lead Plastic SOT-23 40C to 85C Consult LTC Marketing for parts specified with wider operating temperature ranges. Consult LTC Marketing for information on nonstandard lead based finish parts. For more information on lead free part marking, go to: