LTC2630 Single 12-/10-/8-Bit Rail-to- Rail DACs with 10ppm/C Reference in SC70 Features Description n Integrated Precision Reference The LTC 2630 is a family of 12-, 10-, and 8-bit voltage- 2.5V Full Scale 10ppm/C (LTC2630-L) output DACs with an integrated, high-accuracy, low-drift 4.096V Full Scale 10ppm/C (LTC2630-H) reference in a 6-lead SC70 package. It has a rail-to-rail n Maximum INL Error: 1 LSB (LTC2630A-12) output buffer and is guaranteed monotonic. n Low Noise: 0.7mV , 0.1Hz to 200kHz P-P The LTC2630-L has a full-scale output of 2.5V, and n Guaranteed Monotonic over Temperature operates from a single 2.7V to 5.5V supply. The n Selectable Internal Reference or Supply as Reference LTC2630-H has a full-scale output of 4.096V, and operates n 2.7V to 5.5V Supply Range (LTC2630-L) from a 4.5V to 5.5V supply. Each DAC can also operate in n Low Power Operation: 180A at 3V supply as reference mode, which sets the full-scale output n Power Down to 1.8A Maximum (C and I Grades) to the supply voltage. n Power-on Reset to Zero or Mid-Scale Options n The parts use a simple SPI/MICROWIRE compatible SPI Serial Interface n 3-wire serial interface which operates at clock rates up Double-Buffered Data Latches n to 50MHz. Tiny 6-Lead SC70 Package The LTC2630 incorporates a power-on reset circuit. Op- a tions are available for reset to zero or reset to mid-scale after power-up. n Mobile Communications L, LT, LTC, LTM, Linear Technology and the Linear logo are registered trademarks of Linear n Process Control and Industrial Automation Technology Corporation. All other trademarks are the property of their respective owners. Protected by U.S. Patents, including 5396245, 5859606, 6891433, 6937178 and 7414561. n Automatic Test Equipment n Portable Equipment n Automotive Block Diagram Integral Nonlinearity (LTC2630A-LZ12) V CC INTERNAL 1.0 REFERENCE V = 3V CC V = 2.5V FS SDI 0.5 CONTROL RESISTOR DECODE LOGIC DIVIDER 24-BIT SCK 0 SHIFT REGISTER DACREF 0.5 CS/LD V OUT INPUT DAC DAC REGISTER REGISTER 1.0 0 1024 2048 3072 4095 CODE GND 2630 TA03 2630 BD 2630ff 1 INL (LSB) pplicationsLTC2630 aB m r p c F (Notes 1, 2) TOP VIEW Supply Voltage (V ) ................................... 0.3V to 6V CC CS/LD, SCK, SDI .......................................... 0.3V to 6V CS/LD 1 6 V OUT SCK 2 5 GND V ..................................0.3V to min(V + 0.3V, 6V) OUT CC SDI 3 4 V CC Operating Temperature Range LTC2630C ................................................ 0C to 70C SC6 PACKAGE 6-LEAD PLASTIC SC70 LTC2630I .............................................40C to 85C T = 150C (Note 6), = 300C/W JMAX JA LTC2630H (Note 3) ............................40C to 125C Maximum Junction Temperature .......................... 150C Storage Temperature Range ..................65C to 150C Lead Temperature (Soldering, 10 sec) ...................300C o r D i n F LTC2630 A C SC6 L M 12 TRM PBF LEAD FREE DESIGNATOR TAPE AND REEL TR = 2,500-Piece Tape and Reel TRM = 500-Piece Tape and Reel RESOLUTION 12 = 12-Bit 10 = 10-Bit 8 = 8-Bit POWER-ON RESET M = Reset to Mid-Scale Z = Reset to Zero-Scale FULL-SCALE VOLTAGE, INTERNAL REFERENCE MODE L = 2.5V H = 4.096V PACKAGE TYPE SC6 = 6-Lead SC70 TEMPERATURE GRADE C = Commercial Temperature Range (0C to 70C) I = Industrial Temperature Range (40C to 85C) H = Automotive Temperature Range (40C to 125C) ELECTRICAL GRADE (OPTIONAL) A = 1 LSB Maximum INL (12-Bit) PRODUCT PART NUMBER Consult LTC Marketing for information on non-standard lead based finish parts. For more information on lead free part marking, go to: