LTC7004
Fast 60V High Side
NMOS Static Switch Driver
FEATURES DESCRIPTION
n
Wide Operating V : Up to 60V The LTC 7004 is a fast high side N-channel MOSFET gate
IN
n
1 Pull-Down, 2.2 Pull-Up for Fast Turn-On and driver that operates from input voltages up to 60V. It
Turn-Off Times with 35ns Propagation Delays contains an internal charge pump that fully enhances an
n
Internal Charge Pump for 100% Duty Cycle external N-channel MOSFET switch, allowing it to remain
n
Adjustable Turn-On Slew Rate on indefinitely.
n
Gate Driver Supply from 3.5V to 15V
Its powerful driver can easily drive large gate capacitances
n
Adjustable V Overvoltage Lockout
IN
with very short transition times, making it well suited for
n
Adjustable Driver Supply V Undervoltage Lockout
CC
both high frequency switching applications or static switch
n
CMOS Compatible Input
applications that require a fast turn-on and/or turn-off time.
n
Thermally Enhanced, High Voltage Capable 10-Lead
The LTC7004 is available in the thermally-enhanced 10-lead
MSOP Package
MSOP package.
All registered trademarks and trademarks are the property of their respective owners.
APPLICATIONS
n
Static Switch Driver
n
Load and Supply Switch Driver
n
Electronic Valve Driver
n
High Frequency High Side Gate Driver
TYPICAL APPLICATION
High Voltage, High Side Switch with 100% Duty Cycle LTC7004 Driving a 1nF Capacitive Load
V
IN
0V TO 60V
V
V
CC INP
V TGUP
CC
3.5V TO 15V
2V/DIV
LTC7004
TGDN
OFF ON INP BST
V
V 0.1F TG-TS
CCUV
5V/DIV
LOAD
OVLO TS
0V TO 60V
GND
7004 TA01a
7004 TA01b
10ns/DIV
Rev. B
1
Document Feedback
For more information www.analog.comLTC7004
ABSOLUTE MAXIMUM RATINGS PIN CONFIGURATION
(Note 1)
Supply Voltages
TOP VIEW
BST-TS ................................................... 0.3V to 15V
V 1 10 NC
CC
V ......................................................... 0.3V to 15V
CC
V 2 9 BST
CCUV
11
GND 3 8 TS
TS Voltage .................................................... 6V to 65V
GND
INP 4 7 TGUP
BST Voltage .............................................. 0.3V to 80V OVLO 5 6 TGDN
MSE PACKAGE
INP Voltage ................................................... 6V to 15V
10-LEAD PLASTIC MSOP
Driver Outputs TGUP, TGDN ............................... (Note 6)
T = 150C, = 45C/W, = 10C/W
JMAX JA JC
EXPOSED PAD (PIN 11) IS GND, MUST BE SOLDERED TO PCB
V Voltage ................................................ 0.3 to 6V
CCUV
OVLO Voltage .............................................. 0.3V to 6V
Operating Junction Temperature Range (Notes 2, 3, 4)
LTC7004E, LTC7004I, ....................... 40C to 125C
LTC7004H, ......................................... 40C to 150C
LTC7004MP ....................................... 55C to 150C
Storage Temperature Range .................. 65C to 150C
Lead Temperature (Soldering, 10 sec)
MSOP Package .................................................300C
ORDER INFORMATION
LEAD FREE FINISH TAPE AND REEL PART MARKING* PACKAGE DESCRIPTION TEMPERATURE RANGE
LTC7004EMSE#PBF LTC7004EMSE#TRPBF LTHBV 10-Lead Plastic MSOP 40C to 125C
LTC7004IMSE#PBF LTC7004IMSE#TRPBF LTHBV 10-Lead Plastic MSOP 40C to 125C
LTC7004HMSE#PBF LTC7004HMSE#TRPBF LTHBV 10-Lead Plastic MSOP 40C to 150C
LTC7004MPMSE#PBF LTC7004MPMSE#TRPBF LTHBV 10-Lead Plastic MSOP 55C to 150C
Contact the factory for parts specified with wider operating temperature ranges. *The temperature grade is identified by a label on the shipping container.
Tape and reel specifications. Some packages are available in 500 unit reels through designated sales channels with #TRMPBF suffix.
Rev. B
2
For more information www.analog.com