Evaluate: MAX1162/MAX1062 19-2582 Rev 1 12/06 MAX1162 Evaluation System/Evaluation Kit General Description Features The MAX1162 evaluation system (EV system) is a com- Proven PCB Layout plete 16-bit data-acquisition system consisting of a Convenient On-Board Test Points MAX1162 evaluation kit (EV kit), Maxim 68HC16MOD- Fully Assembled and Tested ULE-DIP microcontroller (C) module, and USBTO232. EV Kit Software Supports Windows 98/2000/XP Order the complete EV system (MAX1162EVC16) for with RS-232/COM Ports comprehensive evaluation of the MAX1162, using a per- sonal computer (PC). Order the EV kit (MAX1162EVKIT) EV Kit Software Supports Windows 2000/XP with separately if the 68HC16MODULE-DIP module has USB Ports already been purchased with a previous Maxim EV sys- Ordering Information tem or for custom use in other C-based systems. PART TEMP RANGE INTERFACE This EV kit can also be used to evaluate the MAX1062 14-bit ADC. MAX1162EVKIT 0 C to +70C User supplied To evaluate the MAX1062, request a MAX1062AEUB free MAX1162EVC16 0C to +70C Windows software sample when ordering this EV kit. Note: The MAX1162 software is designed for use with the com- plete EV system. It includes both a C module and the EV kit. If the Windows software will not be used, the EV kit board can be purchased by itself, without the C module. MAX1162 EV Kit Files PROGRAM FUNCTIONS MAX1162EVC16 System Installs the EV kit files on your INSTALL.EXE computer PART QTY DESCRIPTION MAX1162.EXE Application program MAX1162EVKIT 1 MAX1162 EV kit Software loaded into 68HC16 68HC16MODULE-DIP 1 68HC16 C module KIT1162.C16 microcontroller USB-to-COM port adapter USBTO232+ 1 board Component List DESIGNATION QTY DESCRIPTION DESIGNATION QTY DESCRIPTION TB0 1 2-circuit terminal block 10F 20%, 16V X5R ceramic TP1 1 5-pin header C1, C4 2 capacitors (1210) TDK C3225X5R1C106M 16-bit ADC (10-pin MAX) U1 1 MAX1162BCUB 0.1F 10%, 16V X7R ceramic C2, C3, C5, C7, 5 capacitors (0603) Logic buffer (5-pin SOT23) C8 U2 1 TDK C1608X7R1C104KT Fairchild Semiconductor NC7SZ125 Op amp (5-pin SOT23) 4.7F 20%, 16V X5R ceramic U3 1 MAX4430EUK C6 1 capacitor (1206) TDK C3216X5R1C475M MAX1162 EV kit data sheet 1 (includes 68HC16MODULE-DIP 4700pF 10%, 50V X7R ceramic manual) capacitor (0603) C9 1 TDK C1603X7R1H472KT 1 PCB: MAX1162EVKIT Surface-mount ferrite beads (0603) 3.5in software disk, 1 FB1, FB2 2 MAX1162 evaluation kit TDK MMZ1608B601C 1 MAX1162 data sheet J1 1 2 x 20 right-angle female connector R1 1 200 1% resistor (0603) Windows is a registered trademark of Microsoft Corp. Maxim Integrated Products 1 For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct at 1-888-629-4642, or visit Maxims website at www.maxim-ic.com.MAX1162 Evaluation System/Evaluation Kit Component Suppliers SUPPLIER PHONE WEBSITE Fairchild Semiconductor 888-522-5372 www.fairchildsemi.com TDK Corp. 847-803-6100 www.component.tdk.com Note: Indicate that you are using the MAX1162 when contacting these component suppliers. 7) Apply a 4.096V reference voltage to the MAX1162 Quick Start EV kits terminal block (TB0) located in the upper- Recommended EquipmentUSB Port PC left corner of the MAX1162 EV kit board. Observe Connection Option the polarity marked on the board. Before you begin, the following equipment is needed: 8) Connect the USBTO232 board to the 68HC16MOD- MAX1162EVC16 (MAX1162EVKIT board, ULE-DIP module if you have not done so already. 68HC16MODULE-DIP, and USBTO232) 9) The MAX1162 EV kit software should have already Three DC power supplies: 8V to 20V, 5V, and -5V been downloaded and installed in the USBTO232 Quick Start. External reference: +4.096V 10) Start the MAX1162 program by opening its icon in Analog signal source: 0 to +4.096V the Start Programs menu. A PC running Windows 2000/XP with an available 11) Turn on all power supplies and enable the refer- standard USB port to connect to the USBTO232 ence voltage. Slide SW1 to the ON position on the USB cable included with the USBTO232 68HC16MODULE-DIP module. Press the OK button to automatically connect and download the Procedure KIT1162.C16 file to the module. Caution: Do not turn on the power until all the con- nections are completed. 12) Apply an input signal (0V to VREF) between AIN and GND. Observe the readout on the running 1) Visit the Maxim website (www.maxim-ic.com) to Windows program. download the latest version of the USBTO232 User Guide. Follow the steps in the USBTO232 User Recommended EquipmentRS-232/COM Guide Quick Start section and return to step 2 of Port PC Connection Option this Quick Start section when finished. Before you begin, the following equipment is needed: 2) Carefully connect the boards by aligning the 40-pin MAX1162EVC16 (MAX1162EVKIT board and connector of the MAX1162 EV kit with the 40-pin 68HC16MODULE-DIP) header of the 68HC16MODULE-DIP module. Gently Three DC power supplies: 8V to 20V, 5V, and -5V press them together. The two boards should be flush against one another. External reference: +4.096V 3) Ensure that the 68HC16MODULE-DIP modules Analog signal source: 0 to +4.096V SW1 switch is in the OFF position. A PC running Windows 98/2000/XP with an avail- 4) Connect the 8V to 20V power supply to the able standard serial port, preferably a 9-pin plug 68HC16MODULE-DIP modules terminal block (J2) A standard serial cable to connect the PCs standard located next to SW1. Observe the polarity marked serial port to the 68HC16MODULE-DIP module on the board. Procedure 5) Connect the 5V power supply to the VDD pad (with Caution: Do not turn on the power until all the con- respect to the GND pad) on the MAX1162 EV kit nections are completed. board. 1) Visit the Maxim website (www.maxim-ic.com/evkit- 6) Connect the -5V power supply to the VEE pad (with software) to download the latest version of the EV kit respect to the GND pad) on the MAX1162 EV kit software. Save the EV kit software to a temporary board. folder and uncompress the file (if it is a .zip file). 2 Evaluate: MAX1162/MAX1062