MAX13053A- +5V, 2Mbps CAN Transceiver with 65V Fault MAX13054A Protection, 25V CMR, and 25KV ESD General Description Benefits and Features Integrated Protection Increases Robustness The MAX13053A* and MAX13054A are +5V CAN 65V Fault Tolerant CANH and CANL (Control Area Network) transceivers with integrated 25kV ESD HBM (Human Body Model) protection for industrial applications. These devices have 25V Extended Common Mode Input Range extended 65V fault protection for equipment where (CMR) overvoltage protection is required. It also incorporates Transmitter Dominant Timeout Prevents Lockup high 25kV ESD HBM and an input common mode range Short-Circuit Protection (CMR) of 25V, exceeding the ISO11898 specification Thermal Shutdown of -2V to +7V. This makes these parts well suited for Family Provides Flexible Design Options applications that are in electrically noisy environments, Slow Slew Rate to Minimize EMI where the ground planes are shifting relative to each Silent Mode S Disables Transmitter other. This family features a variety of options to address STBY Input for Low-Current Mode common CAN application requirements logic-level 1.62V to 5.5V Logic-Supply (V ) Range supply input V for interfacing with 1.62V to 5.5V logic, L L High-Speed Operation of Up to 2Mbps low-current standby mode, silent-mode to disable the Operating Temperature Range of -40C to +125C in transmitter, and a slow slew rate to minimize EMI. 8-pin SOIC Package These devices operate at a high-speed CAN data rate, Ordering Information appears at end of datasheet. allowing up to 2Mbps on small networks. Maximum speed on large networks may be limited by the number of nodes in a network, type of cabling, stub length, and other factors. These transceivers include a dominant timeout to prevent bus lockup caused by controller error or by a fault on the TXD input. When TXD remains in the dominant state (low) for longer than T , the driver DOM is switched to the recessive state, releasing the bus. The MAX13053A* features a S pin where it enables and disables the transmitter for applications where you need the transceiver to receive only. The MAX13054A features a STBY pin for 3 modes of operation standby mode for low current consumption, normal high speed mode, or a slow slew rate mode when an external 26.1k is connected between ground and STBY pin. The MAX13053A* and MAX13054A are available in standard 8-pin SOIC package and operate over the -40C to +125C temperature range. * Denotes future product. Applications Programmable Logic Controller Industrial Automation Building Automation Instrumentation Smart Grid Equipment Drone Motor Control Exported 2017-11-21 17:34 UTCMAX13053A- +5V, 2Mbps CAN Transceiver with 65V Fault MAX13054A Protection, 25V CMR, and 25KV ESD Simplified Block Diagram VDD MAX13053A/MAX13053A/ MAXMAX13054A13054A THERMAL SHUTDOWN V L CANH PROTECTION CANL TXD DOMINANT DRIVER PROTECTION TIMEOUT STBY/S WAKE-UP MODE CONTROL WAKE-UP FILTER RXD DRIVER MUX GND www.maximintegrated.com Maxim Integrated 2 LEVEL SHIFTER