MAX14590ETA+T Analog Devices

19-5818 Rev 0 3/11 MAX14586/MAX14590 High-Current Overvoltage Protectors with Adjustable OVLO General Description Benefits and Features The MAX14586/MAX14590 overvoltage protection devic- S Protect High-Power Portable Devices es feature a low 48mI (typ) on-resistance (R ) internal Wide Operating Input Voltage Protection ON FET and protect low-voltage systems against voltage from +2.2V to +36V faults up to +36V. When the input voltage exceeds the 3A Continuous Current Capability overvoltage threshold, the internal FET is turned off to Integrated 40mI (typ) n-Channel MOSFET prevent damage to the protected components. Switch The overvoltage protection threshold can be adjusted S Flexible Overvoltage Protection Design with optional external resistors to any voltage between Adjustable Overvoltage Protection Trip Level 4V and 20V. With the OVLO input set below the exter- Wide Adjustable OVLO Threshold Range nal OVLO select voltage, the devices automatically from +4V to +20V choose the internal accurate trip thresholds. The internal Preset Internal Accurate OVLO overvoltage thresholds (OVLO) are preset to 7V typical Thresholds: (MAX14586) or 15V typical (MAX14590). The devices are 7V 2.9% (MAX14586) also protected against overcurrent events by an internal 15V 3.3% (MAX14590) thermal shutdown. S Additional Protection Features Increase System The MAX14586/MAX14590 are offered in a small, 8-pin Reliability TDFN package with exposed pad and operate over the Soft-Start to Minimize In-Rush Current -40NC to +85NC extended temperature range. Internal 15ms Startup Debounce Thermal-Shutdown Protection Applications S Minimize PCB Area 8-Pin TDFN (2mm x 2mm) Package Smartphones Tablet PCs Ordering Information appears at end of data sheet. Mobile Internet Devices Typical Application Circuit POWER IN OUT CHARGER ADAPTER 1F Li-ION IN OUT BATTERY MAX14586 R1* MAX14590 OVLO PMIC R2* GND *R1 AND R2 ARE ONLY REQUIRED FOR ADJUSTABLE OVLO OTHERWISE, CONNECT OVLO TO GND. For related parts and recommended products to use with this part, refer to: www.maxim-ic.com/MAX14586.related Maxim Integrated Products 1 For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxims website at www.maxim-ic.com.MAX14586/MAX14590 High-Current Overvoltage Protectors with Adjustable OVLO ABSOLUTE MAXIMUM RATINGS (All voltages referenced to GND.) Continuous Power Dissipation (T = +70NC) A IN ...........................................................................-0.3V to +40V TDFN (derate 11.9mW/NC above +70NC) ....................954mW OUT ............................................................-0.3V to (V + 0.3V) Operating Temperature Range .......................... -40NC to +85NC IN OVLO .......................................................................-0.3V to +6V Junction Temperature .....................................................+150NC Continuous IN, OUT Current (Note 1) .....................................3A Storage Temperature Range ............................ -65NC to +150NC Peak IN, OUT Current (10ms) .................................................5A Lead Temperature (soldering, 10s) ................................+300NC Continuous OVLO Current ..................................................50FA Soldering Temperature (reflow) ......................................+260NC Note 1: Continuous current limited by thermal design. Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional opera- tion of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. PACKAGE THERMAL CHARACTERISTICS (Note 2) TDFN Junction-to-Ambient Thermal Resistance (B ) .......83.9NC/W JA Junction-to-Case Thermal Resistance (B ) .............. 37NC/W JC Note 2: Package thermal resistances were obtained using the method described in JEDEC specification JESD51-7, using a four- layer board. For detailed information on package thermal considerations, refer to www.maxim-ic.com/thermal-tutorial. ELECTRICAL CHARACTERISTICS (V = +2.2V to +36V, T = -40NC to +85NC, unless otherwise noted. Typical values are at V = +5.0V and T = +25NC.) (Note 3) IN A IN A PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS Input Voltage Range V 2.2 36 V IN Input Supply Current I V < 5V 65 120 FA IN IN MAX14586 6.8 7 7.2 V rising IN MAX14590 14.5 15 15.5 IN Overvoltage Trip Level V V IN OVLO MAX14586 6.73 6.93 7.13 V falling IN MAX14590 14.35 14.85 15.35 IN Overvoltage Lockout V 1 % IN OVLO HYS Hysteresis OVLO Set Threshold V 1.18 1.223 1.26 V OVLO THRESH Adjustable OVLO Threshold 4 20 V Range External OVLO Select V 0.25 0.35 0.4 V OVLO SELECT Threshold I = 100mA, T = +25C, V = 5V 48 81 OUT A IN Switch On-Resistance R mI ON I = 100mA, T = -40C to +85C 115 OUT A OVLO Clamp I = 10FA, V = 5V 3.6 V CLAMP IN OUT Capacitor C 1000 FF OUT OVLO Input Leakage Current I V = 1.221V -100 +100 nA OVLO OVLO THRESH Thermal Shutdown +150 NC Thermal Shutdown Hysteresis 20 NC Maxim Integrated Products 2 *The parametric values (min, typ, max limits) shown in the Electrical Characteristics table supersede values quoted elsewhere in this data sheet.