MAX15012/MAX15013 19-0530 Rev 1 12/07 175V/2A, High-Speed, Half-Bridge MOSFET Drivers General Description Features The MAX15012/MAX15013 high-frequency, 175V half- HIP2100/HIP2101 Pin Compatible (MAX15012A/C bridge, n-channel MOSFET drivers drive high- and low- and MAX15013A/C) side MOSFETs in high-voltage applications. These Up to 175V Input Operation drivers are independently controlled and their 35ns typ- 8V to 12.6V V Input Voltage Range DD ical propagation delay, from input to output, are matched to within 2ns (typ). The high-voltage operation 2A Peak Source and Sink Current Drive Capability with very low and matched propagation delay between 35ns Typical Propagation Delay drivers, and high source/sink current capabilities make Guaranteed 8ns Propagation Delay Matching these devices suitable for the high-power, high-fre- Between Drivers quency telecom power converters. A reliable on-chip bootstrap diode connected between V and BST Up to 500kHz Switching Frequency DD eliminates the need for an external discrete diode. Available in CMOS (V /2) or TTL Logic-Level DD The MAX15012A/C and MAX15013A/C offer both nonin- Inputs with Hysteresis verting drivers (see the Selector Guide). The Up to 14V Logic Inputs Independent of Input MAX15012B/D and MAX15013B/D offer a noninverting Voltage high-side driver and an inverting low-side driver. The Low 2.5pF Input Capacitance MAX15012A/B/C/D feature CMOS (V /2) logic inputs. DD The MAX15013A/B/C/D feature TTL logic inputs. The Low 70A Supply Current drivers are available in the industry-standard 8-pin SO Versions Available with Combination of footprint and pin configuration and a thermally Noninverting and Inverting Drivers (MAX15012B/D enhanced 8-pin SO package. All devices operate over and MAX15013B/D) the -40C to +125C automotive temperature range. Available in Industry-Standard 8-Pin SO and Thermally Enhanced SO Packages Applications Ordering Information Telecom Half-Bridge Power Supplies PIN- PKG PART TEMP RANGE Two-Switch Forward Converters PACKAGE CODE Full-Bridge Converters MAX15012AASA+ -40C to +125C 8 SO S8-5 Active-Clamp Forward Converters MAX15012BASA+ -40C to +125C 8 SO S8-5 Power-Supply Modules MAX15012CASA+* -40C to +125C 8 SO-EP** S8E+14 MAX15012DASA+* -40C to +125C 8 SO-EP** S8E+14 Motor Control Ordering Information continued at end of data sheet. +Denotes lead-free package. Pin Configurations and Typical Operating Circuit appear at *Future productcontact factory for availability. the end of data sheet. **EP = Exposed pad. Selector Guide PART HIGH-SIDE DRIVER LOW-SIDE DRIVER LOGIC LEVELS PIN COMPATIBLE MAX15012AASA+ Noninverting Noninverting CMOS (V /2) HIP 2100IB DD MAX15012BASA+ Noninverting Inverting CMOS (V /2) DD MAX15012CASA+ Noninverting Noninverting CMOS (V /2) HIP 2100IB DD MAX15012DASA+ Noninverting Inverting CMOS (V /2) DD MAX15013AASA+ Noninverting Noninverting TTL HIP 2101IB MAX15013BASA+ Noninverting Inverting TTL MAX15013CASA+ Noninverting Noninverting TTL HIP 2101IB MAX15013DASA+ Noninverting Inverting TTL Maxim Integrated Products 1 For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxims website at www.maxim-ic.com.175V/2A, High-Speed, Half-Bridge MOSFET Drivers ABSOLUTE MAXIMUM RATINGS (All voltages referenced to GND, unless otherwise noted.) Junction-to-Case Thermal Resistance ( )(Note 1) JC V , IN H, IN L......................................................-0.3V to +14V 8-Pin SO .......................................................................40C/W DD DL...............................................................-0.3V to (V + 0.3V) 8-Pin SO-EP....................................................................6C/W DD HS............................................................................-5V to +180V Junction-to-Ambient Thermal Resistance ( )(Note 1) JA DH to HS.....................................................-0.3V to (V + 0.3V) 8-Pin SO .....................................................................170C/W DD BST to HS ...............................................................-0.3V to +14V 8-Pin SO-EP..................................................................52C/W dV/dt at HS ........................................................................50V/ns Maximum Junction Temperature .....................................+150C Continuous Power Dissipation (T = +70C) Operating Temperature Range .........................-40C to +125C A 8-Pin SO (derate 5.9mW/C above +70C)...............470.6mW Storage Temperature Range .............................-65C to +150C 8-Pin SO-EP (derate 19.2mW/C above +70C) .....1538.5mW Lead Temperature (soldering, 10s) .................................+300C *Per JEDEC 51 Standard Multilayer board. Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Note 1: Package thermal resistances were obtained using the method described in JEDEC specification JE5D51-7, using a four- layer board. For detailed information on package thermal considerations, see www.maxim-ic.com/thermal-tutorial. ELECTRICAL CHARACTERISTICS (V = V = +8V to +12.6V, V = GND = 0V, T = T = -40C to +125C, unless otherwise noted. Typical values are at V = DD BST HS A J DD V = +12V and T = +25C.) (Note 2) BST A PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS POWER SUPPLIES Operating Supply Voltage V (Notes 3 and 4) 8.0 12.6 V DD V Quiescent Supply Current IN H = IN L = GND (for A/C versions), DD I 70 140 A DD (No Switching) IN H = GND, IN L = V (for B/D versions) DD V Operating Supply Current I f = 500kHz, V = +12V 3 mA DD DDO SW DD IN H = IN L = GND (for A/C versions), BST Quiescent Supply Current I 15 40 A BST IN H = GND, IN L = V (for B/D versions) DD BST Operating Supply Current I f = 500kHz, V = V = +12V 3 mA BSTO SW DD BST UVLO (V to GND) UVLO V rising 6.5 7.3 8.0 V DD VDD DD UVLO (BST to HS) UVLO BST rising 6.0 6.9 7.8 V BST UVLO Hysteresis 0.5 V LOGIC INPUT 0.67 x 0.55 x MAX15012 , CMOS (V /2) version DD V V Input-Logic High V DD DD V IH MAX15013 , TTL version 2 1.65 0.4 x 0.33 x MAX15012 , CMOS (V /2) version DD V V Input-Logic Low V V IL DD DD MAX15013 , TTL version 1.4 0.8 MAX15012 , CMOS (V /2) version 1.6 DD Logic-Input Hysteresis V V HYS MAX15013 , TTL version 0.25 2 MAX15012/MAX15013