MAX200MAX209/ +5V, RS-232 Transceivers MAX211/MAX213 with 0.1F External Capacitors General Description Applications MAX200-MAX209, MAX211, and MAX213 are a family Battery-Powered Equipment of RS-232 and V.28 transceivers with integrated charge Handheld Equipment pump circuitry for single +5V supply operation. Portable Diagnostics Equipment The drivers maintain the 5V EIA/TIA-232E output signal Typical Operating Circuit levels at data rates in excess of 120kbps when loaded in accordance with the EIA/TIA-232E specification. +5V INPUT The MAX211 and MAX213 are available in a 28-pin, wide small-outline (SO) package and a 28-pin shrink small- 0.1F outline (SSOP) package, which occupies only 40% of the 7 0.1F 8 +6.3V VCC C1+ area of the SO. The MAX207 is available in a 24-pin SO 9 0.1F V+ +5V TO +10V +6.3V 10 package and a 24-pin SSOP. The MAX203 and MAX205 C1- VOLTAGE DOUBLER 11 use no external components and are recommended for C2+ 13 +10V TO -10V 0.1F V- VOLTAGE INVERTER applications with limited circuit board space. 12 +16V 0.1F C2- +16V +5V Benefits and Features 400k T1 T1 Saves Board Space 5 IN OUT 2 T1 +5V Integrated Charge Pump Circuitry Eliminates the Need for a Bipolar 12V Supply 400k 4 T2IN T2OUT 3 Enables Single Supply Operation From Either +5V T2 +5V or 9V to +12V 400k Integrated 0.1F Capacitors (MAX203, MAX205) T3 T3 TTL/CMOS 14 IN OUT 1 RS-232 T3 INPUTS OUTPUTS 24 pin SSOP Package Saves Up to 40% Versus +5V SO Package 400k Saves Power for Longer Battery Operation T4 T4 15 IN OUT 20 T4 5W Shutdown Mode (MAX200, MAX205, +5V MAX206, MAX211) 400k 75W Ring Indicator Monitoring with Two Active T5 T5 19 IN OUT 16 T5 Receivers (MAX213) 18 17 MAX200 N.C. SHDN GND 6 Selector Guide NUMBER OF NUMBER OF NUMBER NUMBER LOW-POWER POWER-SUPPLY RECEIVERS EXTERNAL PART OF RS-232 OF RS-232 SHUTDOWN/TTL VOLTAGE (V) ACTIVE IN CAPACITORS DRIVERS RECEIVERS THREE-STATE SHUTDOWN (0.1F) MAX200 +5 5 0 0 4 Yes/No MAX201 +5 and +9.0 to +13.2 2 2 0 2 No/No MAX202 +5 2 2 0 4 No/No MAX203 +5 2 2 0 None No/No Selector Guide continued at end of data sheet. 19-0065 Rev 8 1/15MAX200MAX209/ +5V, RS-232 Transceivers MAX211/MAX213 with 0.1F External Capacitors Absolute Maximum Ratings V ..........................................................................-0.3V to +6V 20-Pin Wide SO (derate 10.00mW/C above +70C) ..800mW CC V+ .............................................................. (V - 0.3V) to +14V 20-Pin CERDIP (derate 11.11mW/C above +70C) ...889mW CC V- ...........................................................................+0.3V to -14V 24-Pin Narrow Plastic DIP Input Voltages (derate 13.33mW/C above +70C) .......................1067mW T ........................................................ -0.3V to (V + 0.3V) 24-Pin Wide Plastic DIP IN CC R ...................................................................................30V (derate 9.09mW/C above +70C) ...........................727mW IN Output Voltages 24-Pin Wide SO (derate 11.76mW/C above +70C) ..941mW T ................................................(V+ + 0.3V) to (V- - 0.3V) 24-Pin SSOP (derate 8.00mW/C above +70C) ........640mW OUT R .................................................... -0.3V to (V + 0.3V) 24-Pin CERDIP (derate 12.50mW/C above +70C) ...1000mW OUT CC Short-Circuit Duration 28-Pin Wide SO (derate 12.50mW/C above +70C) ..1000mW T ......................................................................Continuous 28-Pin SSOP (derate 9.52mW/C above +70C) ........762mW OUT Continuous Power Dissipation (T = +70C) Operating Temperature Ranges A 14-Pin Plastic DIP (derate 10.00mW/C above +70C) ...800mW MAX2 C .....................................................0C to +70C 16-Pin Plastic DIP (derate 10.53mW/C above +70C) ...842mW MAX2 E ................................................. -40C to +85C 16-Pin SO (derate 8.70mW/C above +70C) .............696mW MAX2 M .............................................. -55C to +125C 16-Pin Wide SO (derate 9.52mW/C above +70C) ...762mW Storage Temperature Range ............................ -65C to +160C 16-Pin CERDIP (derate 10.00mW/C above +70C) .....800mW Lead Temperature (soldering, 10s) (Note 1) ...................+300C 20-Pin Plastic DIP (derate 11.11mW/C above +70C) ...889mW Note 1: Maximum reflow temperature for the MAX203 and MAX205 is +225C. Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Electrical Characteristics (MAX202/MAX204/MAX206/MAX208/MAX211/MAX213: V = +5V 10% MAX200/MAX203/MAX205/MAX207: V = +5V 5%, CC CC C1C4 = 0.1F MAX201/MAX209: V = +5V 10%, V+ = +9.0V to +13.2V, T = T to T , unless otherwise noted.) CC A MIN MAX PARAMETER CONDITIONS MIN TYP MAX UNITS Output-Voltage Swing All transmitter outputs loaded with 3k to ground 5 8 V MAX202, MAX203 8 15 V Power-Supply MAX200, MAX204MAX208, MAX211, CC No load, T = +25C 11 20 mA A Current MAX213 MAX201, MAX209 0.4 1 MAX201 5 10 V+ Power-Supply Current No load mA MAX209 7 15 MAX200, MAX205, MAX206, MAX211 1 10 Shutdown Supply Current Figure 1, T = +25C A A MAX213 15 50 Input Logic Threshold Low T , EN, SHDN, EN, SHDN 0.8 V IN T 2.0 IN Input Logic Threshold High V EN, SHDN, EN, SHDN 2.4 Logic Pullup Current T = 0V 15 200 A IN RS-232 Input-Voltage -30 +30 V Operating Range Maxim Integrated 2 www.maximintegrated.com