Click here for production status of specific part numbers. MAX220MAX249 +5V-Powered, Multichannel RS-232 Drivers/Receivers General Description Benefits and Features The MAX220MAX249 family of line drivers/receivers is Saves Board Space intended for all EIA/TIA-232E and V.28/V.24 communications Integrated Charge Pump Circuitry interfaces, particularly applications where 12V is not Eliminates the Need for a Bipolar 12V Supply available. Enables Single Supply Operation from +5V Supply The MAX225, MAX233, MAX235, and MAX245/MAX246/ Integrated Capacitors (MAX223, MAX233, MAX235, MAX247 use no external components and are recommended MAX245MAX247) for applications where printed circuit board space is critical. Saves Power for Reduced Power Requirements The MAX220-MAX249 are offered in 26 different packages 5W Shutdown Mode with temperatures from 0 to +70C up to -55C to +125C. See ordering information table at the end of the data sheet for all package and temperature options. Ordering Information and Selection Table appears at end of Applications data sheet. Interface Translation Multidrop RS-232 Networks Portable Diagnostics Equipment AutoShutdown and UCSP are trademarks of Maxim Integrated Products, Inc. MAX220/MAX232/MAX232A Pin Configuration and Typical Operating Circuit +5V INPUT C3 TOP VIEW C5 16 + V 1 CC C1+ 2 1 V 16 CC C1+ +10V V+ +5V TO +10V C1 3 C1- V+ 2 GND VOLTAGE DOUBLER 15 4 6 -10V C2+ +10V TO -10V C1- T1OUT 3 V- 14 C2 5 C2- VOLTAGE INVERTER C4 R1IN C2+ 4 MAX220 13 +5V MAX232 C2- R1OUT 400k 5 12 MAX232A T1IN 11 T1OUT 14 V- 6 T1IN 11 +5V TTL/CMOS RS-232 T2OUT 7 10 T2IN INPUTS 400k OUTPUTS R2IN 8 9 R2OUT 10 T2IN T2OUT 7 DIP/SO 12 R1OUT R1IN 13 TTL/CMOS 5k RS-232 CAPACITANCE (F) OUTPUTS INPUTS DEVICE C1 C2 C3 C4 C5 8 9 R2OUT R2IN MAX220 0.047 0.33 0.33 0.33 0.33 MAX232 1.0 1.0 1.0 1.0 1.0 5k MAX232A 0.1 0.1 0.1 0.1 0.1 GND 15 19-4323 Rev 18 5/19MAX220MAX249 +5V-Powered, Multichannel RS-232 Drivers/Receivers Absolute Maximum RatingsMAX220/222/232A/233A/242/243 (Voltages referenced to GND.) 16-Pin Narrow SO (derate 8.70mW/C above +70C).... 696mW V ..........................................................................-0.3V to +6V 16-Pin Wide SO (derate 9.52mW/C above +70C) .......762mW CC V+ (Note 1) ................................................ (V - 0.3V) to +14V 18-Pin Wide SO (derate 9.52mW/C above +70C) .......762mW CC V- (Note 1) .............................................................+0.3V to -14V 20-Pin Wide SO (derate 10.00mW/C above +70C) .....800mW Input Voltages 20-Pin SSOP (derate 8.00mW/C above +70C) ............640mW TIN .........................................................-0.3V to (V - 0.3V) 16-Pin CERDIP (derate 10.00mW/C above +70C) ......800mW CC RIN (Except MAX220) .....................................................30V 18-Pin CERDIP (derate 10.53mW/C above +70C) ......842mW RIN (MAX220) .................................................................25V Operating Temperature Ranges TOUT (Except MAX220) (Note 2) ...................................15V MAX2 AC , MAX2 C ..........................0C to +70C TOUT (MAX220) ...........................................................13.2V MAX2 AE , MAX2 E ...................... -40C to +85C Output Voltages MAX2 AM , MAX2 M ................... -55C to +125C TOUT ...............................................................................15V Storage Temperature Range ............................ -65C to +160C ROUT .................................................... -0.3V to (V + 0.3V) Lead Temperature (soldering, 10s) .................................+300C CC Driver/Receiver Output Short Circuited to GND ........Continuous Soldering Temperature (reflow) Continuous Power Dissipation (T = +70C) 20 PDIP (P20M+1) ......................................................+225C A 16-Pin Plastic DIP (derate 10.53mW/C above+70C) ...842mW All other lead(Pb)-free packages .................................+260C 18-Pin Plastic DIP (derate 11.11mW/C above +70C) ...889mW All other packages containing lead(Pb) .......................+240C 20-Pin Plastic DIP (derate 8.00mW/C above +70C) ....440mW Note 1: For the MAX220, V+ and V- can have a maximum magnitude of 7V, but their absolute difference cannot exceed 13V. Note 2: Input voltage measured with TOUT in high-impedance state, V or V = 0V. SHDN CC Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Electrical CharacteristicsMAX220/222/232A/233A/242/243 (V = +5V 10%, C1C4 = 0.1F MAX220, C1 = 0.047F, C2C4 = 0.33F, T = T to T unless otherwise noted.) (Note 3) CC A MIN MAX PARAMETER CONDITIONS MIN TYP MAX UNITS RS-232 TRANSMITTERS Output Voltage Swing All transmitter outputs loaded with 3k to GND 5 8 V Input Logic-Low Voltage 1.4 0.8 V All devices except MAX220 2 1.4 Input Logic-High Voltage V MAX220: V = +5.0V 2.4 CC All except MAX220, normal operation 5 40 Logic Pullup/lnput Current A V = 0V, MAX222/MAX242, shutdown, MAX220 0.01 1 SHDN V = +5.5V, V = 0V, V = 15V, MAX222/ CC SHDN OUT 0.01 10 MAX242 Output Leakage Current A V = 15V 0.01 10 OUT V = V = 0V CC SHDN MAX220, V = 12V 25 OUT Data Rate 200 116 kbps Transmitter Output Resistance V = V+ = V- = 0V, V = 2V 300 10M CC OUT V = 0V 7 22 OUT Output Short-Circuit Current V = 0V mA OUT MAX220 60 RS-232 RECEIVERS 30 RS-232 Input Voltage Operating Range V MAX220 25 All except MAX243 R2IN 0.8 1.3 RS-232 Input Threshold Low V = +5V V CC MAX243 R2IN (Note 4) -3 All except MAX243 R2IN 1.8 2.4 RS-232 Input Threshold High V = +5V V CC MAX243 R2IN (Note 4) -0.5 -0.1 Maxim Integrated 2 www.maximintegrated.com