MAX3000E/MAX3001E/ MAX3002MAX3012 +1.2V to +5.5V, 15kV ESD-Protected, 0.1A, 35Mbps, 8-Channel Level Translators General Description Features The MAX3000E/MAX3001E/MAX3002MAX3012 Guaranteed Data Rate Options 8-channel level translators provide the level shifting nec- 230kbps (MAX3000E) essary to allow data transfer in a multivoltage system. 4Mbps (MAX3001E) Externally applied voltages, V and V , set the logic lev- CC L 20Mbps (MAX3002MAX3012) els on either side of the device. Logic signals present on Bidirectional Level Translation Without Using a the V side of the device appear as a higher voltage logic L Directional Pin (MAX3000E/MAX3001E/MAX3002/ signal on the V side of the device, and vice-versa. CC MAX3003) The MAX3000E/MAX3001E/MAX3002/MAX3003 use an Unidirectional Level Translation architecture specifically designed to be bidirectional (MAX3004MAX3012) without the use of a directional pin. Operation Down to +1.2V on V L The MAX3000E/MAX3001E/MAX3002/MAX3004MAX3012 15kV ESD Protection on I/O V Lines CC feature an EN input that, when low, reduces the V and CC (MAX3000E/MAX3001E) V supply currents to < 2A. The MAX3000E/MAX3001E L Ultra-Low 0.1A Supply Current in Shutdown also have 15kV ESD protection on the I/O V side for CC Low Quiescent Current (< 10A) greater protection in applications that route signals externally. The MAX3000E operates at a guaranteed data UCSP, TQFN, and TSSOP Packages rate of 230kbps. The MAX3001E operates at a guaranteed data rate of 4Mbps. The MAX3002MAX3012 operate at a Ordering Information guaranteed data rate of 20Mbps over the entire specified operating voltage range. PART TEMP RANGE PIN-PACKAGE The MAX3000E/MAX3001E/MAX3002MAX3012 accept MAX3000EEUP -40C to +85C 20 TSSOP V voltages from +1.2V to +5.5V and V voltages from L CC MAX3000EEBP-T -40C to +85C 4 x 5 UCSP +1.65V to +5.5V, making them ideal for data transfer between low-voltage ASICs/PLDs and higher voltage Ordering Information continued at end of data sheet. systems. The MAX3000E/MAX3001E/MAX3002 MAX3012 are available in 20-bump UCSP, 20-pin Note: All devices operate over the -40C to +85C operating TQFN (5mm x 5mm), and 20-pin TSSOP packages. temperature range. Typical Operating Circuit Applications Functional Diagrams CMOS Logic-Level Translation +1.8V +3.3V Cellphones SPI and MICROWIRE Level Translation Low-Voltage ASIC Level Translation Smart Card Readers V V L CC Cellphone Cradles Portable POS Systems EN MAX3000E MAX3001E Portable Communication Devices +1.8V MAX3002 +3.3V SYSTEM Low-Cost Serial Interfaces SYSTEM MAX3012 CONTROLLER GPS DATA I/O V I/O V DATA L CC Telecommunications Equipment GND UCSP is a trademark of Maxim Integrated Products, Inc. SPI is a trademark of Motorola, Inc. Pin Configurations appear at end of data sheet. MICROWIRE is a trademark of National Semiconductor. Functional Diagrams continued at end of data sheet. Pin Configurations and Functional Diagrams appear at end UCSP is a trademark of Maxim Integrated Products, Inc. of data sheet. For pricing, delivery, and ordering information, please contact Maxim Direct 19-2672 Rev 5 8/08 at 1-888-629-4642, or visit Maxims website at www.maxim integrated.com. AVAILABLEMAX3000E/MAX3001E/MAX3002MAX3012 +1.2V to +5.5V, 15kV ESD-Protected, 0.1A, 35Mbps, 8-Channel Level Translators ABSOLUTE MAXIMUM RATINGS (All voltages referenced to GND.) Operating Temperature Ranges V ...........................................................................-0.3V to +6V MAX3001EAUP..............................................-40C to +125C CC V -0.3V to +6V MAX300 EE P .................................................-40C to +85C L........................................................................................... I/O V ......................................................-0.3V to (V + 0.3V) MAX30 E P ..................................................-40C to +85C CC CC I/O V ...........................................................-0.3V to (V + 0.3V) Junction Temperature......................................................+150C L L EN, EN A/B ...............................................................-0.3V to +6V Storage Temperature Range .............................-65C to +150C Short-Circuit Duration I/O V , I/O V to GND .......Continuous Lead Temperature (soldering, 10s) .................................+300C L CC Continuous Power Dissipation (T = +70C) A 20-Pin TSSOP (derate 7.0mW/C above +70C) .........559mW 20-Bump UCSP (derate 10mW/C above +70C) .......800mW 20-Pin 5mm x 5mm TQFN (derate 20.0mW/C above +70C) .....................................1667mW Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICS (V = +1.65V to +5.5V, V = +1.2V to V , EN = V (MAX3000E/MAX3001E/MAX3002/MAX3004MAX3012), EN A/B = V or 0 CC L CC L L (MAX3003), T = T to T . Typical values are at V = +1.65V, V = +1.2V, and T = +25C.) (Notes 1, 2) A MIN MAX CC L A PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS POWER SUPPLIES V Supply Range V 1.2 V V L L CC V Supply Range V 1.65 5.50 V CC CC I/O V = 0, I/O V = 0 CC L or I/O V = V , I/O V = V , 0.1 10 CC CC L L MAX3000E/MAX3002MAX3012 Supply Current from V I A CC QVCC I/O V = 0, I/O V = 0 CC L or I/O V = V , I/O V = V , 0.1 50 CC CC L L MAX3001E I/O V = 0, I/O V = 0 CC L or I/O V = V , I/O V = V , 0.1 10 CC CC L L MAX3000E/MAX3002MAX3012 Supply Current from V I A L QVL I/O V = 0, I/O V = 0 CC L or I/O V = V , I/O V = V , 0.1 50 CC CC L L MAX3001E T = +25C, EN = 0, A MAX3000E/MAX3001E/MAX3002/ 0.1 2 MAX3004MAX3012 V Shutdown Supply Current I A CC SHDN-VCC T = +25C, EN A/B = 0, A 0.1 2 MAX3003 T = +25C, EN = 0, A MAX3000E/MAX3001E/MAX3002/ 0.1 2 MAX3004MAX3012 V Shutdown Supply Current I A L SHDN-VL T = +25C, EN A/B = 0, A 0.1 2 MAX3003 2 Maxim Integrated