MAX30101ACCEVKIT# Analog Devices

Evaluates: MAX30101 MAX30101 Evaluation System General Description Quick Start The MAX30101 evaluation kit (EV kit) provides a proven Required Equipment design to evaluate the MAX30101 integrated pulse-oximetry MAX30101 accelerometer EV kit and heart-rate monitor integrated circuit (IC). The EV kit (MAX30101DBEVKIT , USBOSMB , 10-pin FFC consist of two boards. USBOSMB is the mother board cable, and micro-USB cable included) and MAX30101DBEVKIT is the daughter board that Windows PC includes the MAX30101 and an accelerometer. The EV kit is powered using the USB supply to generate +1.8V Note: Text in bold refers to items directly from the EV for the sensor and +4.5V for the internal LEDs of the kit software. Text in bold and underlined refers to items MAX30101, and +3.3V for the accelerometer. from the Windows operating system. The EV kit comes with a MAX30101EFD+ installed in a Procedure 14-pin OESIP package. The EV kit is fully assembled and tested. Follow the steps below to verify board operation: Features 1) Visit www.maximintegrated.com/evkit-software to Real-Time Monitoring download the most recent version of the EV kit software, Flexible PCB Design MAX30101EVKitSetupVx.x.ZIP. Save the EV kit USB-Powered software to a temporary folder and uncompress the ZIP file. On-Board Accelerometer 2) Open up MAX30101EVKitSetupVx.x.exe and follow Proven PCB Layout the instructions from the pop-up windows. Fully Assembled and Tested 3) Insert one end of the ribbon cable to the J3 connector of the USBOSMB and the other end of the ribbon Windows 7-, and Windows 8/8.1-Compatible cable to the J1 connector of the MAX30101DBEV- Software KIT. Make sure that both connectors and blue ends of the ribbon cable is facing the user. 4) Connect the USB cable from the PC to the EV kit Ordering Information appears at end of data sheet. board. Windows will automatically install all drivers. 5) Open the MAX30101EVKit.exe and verify that the EV kit is connected by observing the status bar at the lower left corner of the GUI. See Figure 1. 6) Press the Start Monitor button. 7) Place your finger in front of the MAX30101 (U4) of the EV kit and observe the Measurement graphs. See Figure 2. Example algorithm 1 and 2 are shown in separate windows (Figure 3 and Figure 4). Windows is a registered trademark and registered service mark of Microsoft Corporation. 19-8548 Rev 0 5/16Evaluates: MAX30101 MAX30101 Evaluation System Figure 1. MAX30101 EV Kit Main Window Maxim Integrated 2 www.maximintegrated.com