MAX30102ACCEVKIT# Analog Devices

Evaluates: MAX30102 MAX30102 Evaluation Kit General Description Quick Start The MAX30102 evaluation kit (EV kit) provides a proven Required Equipment design to evaluate the MAX30102 integrated pulse-oximetry MAX30102 accelerometer EV kit and heart-rate monitor integrated circuit (IC). The EV kit (MAX30102DBEVKIT , USBOSMB , 10-pin FFC consist of two boards. USBOSMB is the mother board cable, and micro USB cable included) and MAX30102DBEVKIT is the daughter board that Windows PC includes the MAX30102 and an accelerometer. The EV kit is powered using the USB supply to generate +1.8V Note: Text in bold refers to items directly from the EV for the sensor and +4.5V for the internal LEDs of the kit software. Text in bold and underlined refers to items MAX30102, and +3.3V for the accelerometer. from the Windows operating system. The EV kit comes with a MAX30102EFD+ installed in a Procedure 14-pin OESIP package. The EV kit is fully assembled and tested. Follow the steps below to verify board operation: Features and Benefits 1) Visit www.maximintegrated.com/evkit-software to Real-Time Monitoring download the most recent version of the EV kit soft- Flexible PCB Design ware, MAX30102EVKitSetupVx.x.ZIP. Save the EV USB-Powered kit software to a temporary folder and uncompress the ZIP file. On-Board Accelerometer 2) Open up MAX30102EVKitSetupVx.x.exe and follow Proven PCB Layout the instructions from the pop-up windows. Fully Assembled and Tested 3) Insert one end of the ribbon cable to the J3 connec- tor of the USBOSMB and the other end of the ribbon Windows 7-, and Windows 8/8.1-Compatible cable to the J1 connector of the MAX30102DBEV- Software KIT. Make sure that both connectors and blue ends of the ribbon cable is facing the user. 4) Connect the USB cable from the PC to the EV kit Ordering Information appears at end of data sheet. board. Windows will automatically install all drivers. 5) Open the MAX30102EVKit.exe and verify that the EV kit is connected by observing the status bar at the lower left corner of the GUI. See Figure 1. 6) Press the Start Monitor button. 7) Place your finger in front of the MAX30102 (U4) of the EV kit and observe the Measurement graphs. See Figure 2. Example algorithm 1 and 2 are shown in separate windows (Figure 3 and Figure 4). Windows is a registered trademark and registered service mark of Microsoft Corporation. 19-7745 Rev 0 10/15Evaluates: MAX30102 MAX30102 Evaluation Kit Figure 1. MAX30102 EV Kit Main Window Maxim Integrated 2 www.maximintegrated.com