MAX30105ACCEVKIT# Analog Devices

Evaluates: MAX30105 MAX30105 Evaluation Kit General Description Quick Start The MAX30105 evaluation kit (EV kit) provides a proven Required Equipment design to evaluate the MAX30105 particle-sensing module. MAX30105 EV kit (MAX30105DBEVKIT , USBOSMB , The EV kit consist of two boards. USBOSMB is the 10-pin FFC cable, and micro-USB cable included) mother board and MAX30105DBEVKIT is the daughter Windows PC board that includes the MAX30105 and an accelerometer. The EV kit is powered using the USB supply to generate Note: Text in bold refers to items directly from the EV +1.8V for the sensor and +4.5V for the internal LEDs kit software. Text in bold and underlined refers to items of the MAX30105, and +3.3V for the accelerometer. from the Windows operating system. However, users do not need the accelerometer to evaluate Procedure the MAX30105. The EV kit is fully assembled and tested. Follow the steps The EV kit comes with a MAX30105EFD+ installed in a below to verify board operation: 14-pin OESIP package. 1) Visit www.maximintegrated.com/evkit-software to download the most recent version of the EV kit software, Features and Benefits MAX30105EVKitSetupVx.x.ZIP. Save the EV kit Real-Time Monitoring software to a temporary folder and uncompress the Flexible PCB Design ZIP file. USB-Powered 2) Open up MAX30105EVKitSetupVx.x.exe and follow the instructions from the pop-up windows. On-Board Accelerometer 3) Insert one end of the ribbon cable to the J3 connector Proven PCB Layout of the USBOSMB and the other end of the ribbon Fully Assembled and Tested cable to the J1 connector of the MAX30105DBEV- KIT. Make sure that both connectors and blue ends Windows 7, and Windows 8/8.1-Compatible Software of the ribbon cable is facing the user. 4) Connect the USB cable from the PC to the EV kit board. Windows will automatically install all drivers. Ordering Information appears at end of data sheet. 5) Open the MAX30105EVKit.exe and verify that the EV kit is connected by observing the status bar at the lower left corner of the GUI. See Figure 1. 6) Press the Start Monitor button. 7) Direct the LEDs of the MAX30105 (U4) of the EV kit towards the particles of interest and observe the Measurement graphs. See Figure 2. Windows is a registered trademark and registered service mark of Microsoft Corporation. 19-8536 Rev 1 7/16Evaluates: MAX30105 MAX30105 Evaluation Kit Figure 1. MAX30105 EV Kit Main Window Maxim Integrated 2 www.maximintegrated.com