MAX4030E/MAX4031E 19-3570 Rev 1 6/05 Low-Cost, 144MHz, Dual/Triple Op Amps with 15kV ESD Protection General Description Features The MAX4030E/MAX4031E unity-gain stable op amps ESD-Protected Video Inputs and Outputs combine high-speed performance, rail-to-rail outputs, 15kV Human Body Model and 15kV ESD protection. Targeted for applications 8kV IEC 1000-4-2 Contact Discharge where an input or an output is exposed to the outside 15kV IEC 1000-4-2 Air-Gap Discharge world, such as video and communications, these 5V Single-Supply Operation devices are compliant with International ESD Standards: 15kV IEC 1000-4-2 Air-Gap Discharge, 0.1A Low-Power Shutdown Mode (MAX4031E) 8kV IEC 1000-4-2 Contact Discharge, and the 15kV Human Body Model. Input Common-Mode Range Extends to Ground The MAX4030E/MAX4031E operate from a single 5V 2V Large-Signal -3dB BW > 50MHz P-P supply and consume only 12mA of quiescent supply Directly Drives 150 Loads current per amplifier while achieving a 144MHz -3dB bandwidth, 20MHz 0.1dB gain flatness, and a 115V/s Low Differential Gain/Phase: 0.2%/0.2 slew rate. The MAX4031E provides individual shutdown -40C to +85C Extended Temperature Range control for each of the amplifiers. Compact 8-Pin MAX and 14-Pin TSSOP The dual MAX4030E is available in 8-pin MAX and SO packages, and the triple MAX4031E is available in 14-pin Packages TSSOP and SO packages. All devices are specified over the -40C to +85C extended temperature range. Applications Ordering Information Set-Top Boxes Notebooks PART TEMP RANGE PIN-PACKAGE Standard Definition Projectors Television (SDTV) MAX4030EEUA -40C to +85C 8 MAX Security Video Systems MAX4030EESA -40C to +85C 8 SO Enhanced Television Camcorders (ETV) MAX4031EEUD -40C to +85C 14 TSSOP Digital Still Cameras High-Definition MAX4031EESD -40C to +85C 14 SO Portable DVD Players Television (HDTV) MAX is a registered trademark of Maxim Integrated Products, Inc. Pin Configurations Typical Operating Circuit 5V TOP VIEW 0.1F MAX4030E IN + SHDNA 1 14 OUTC MAX4031E OUTA 1 8 V CC SHDNC 2 13 INC- 75 OUT INA- 2 7 OUTB 75 Z = 75 o SHDNB 3 12 INC+ MAX4030E INA+ 3 6 INB- V 4 MAX4031E 11 GND CC 75 GND 4 5 INB+ INA+ 5 10 INB+ INA- 6 9 INB- MAX/SO 200 OUTA 7 8 OUTB 200 TSSOP/SO VIDEO LINE DRIVER Maxim Integrated Products 1 For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct at 1-888-629-4642, or visit Maxims website at www.maxim-ic.com.Low-Cost, 144MHz, Dual/Triple Op Amps with 15kV ESD Protection ABSOLUTE MAXIMUM RATINGS (All voltages referenced to GND, unless otherwise noted.) 14-Pin TSSOP (derate 9.1mW/C above +70C) .........727mW V ...........................................................................-0.3V to +6V 14-Pin SO (derate 8.3mW/C above +70C)................667mW CC IN -, IN +, OUT , SHDN ..........................-0.3V to (V + 0.3V) Operating Temperature Range ...........................-40C to +85C CC Current into IN -, IN +, SHDN..........................................20mA Junction Temperature .....................................................+150C Output Short-Circuit Duration to V or GND............Continuous Storage Temperature Range .............................-65C to +150C CC Continuous Power Dissipation (T = +70C) Lead Temperature (soldering, 10s) .................................+300C A 8-Pin MAX (derate 4.5mW/C above +70C) .............362mW 8-Pin SO (derate 5.9mW/C above +70C)..................471mW Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. DC ELECTRICAL CHARACTERISTICS (V = 5V, V = 0V, V = V /2, SHDN = V , R = to V /2, T = T to T , unless otherwise noted. Typical values are CC CM OUT CC CC L CC A MIN MAX at T = +25C.) (Note 1) A PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS Operating Supply Voltage Range V Guaranteed by PSRR 4.5 5.5 V CC Quiescent Current (per Amplifier) I 12 22 mA CC Shutdown Current (per Amplifier) I SHDN = GND (MAX4031E) 0.1 10 A SHDN V - CC Input Common-Mode Voltage V Guaranteed by CMRR 0 V CM 2.25 T = +25C 5 13 A Input Offset Voltage V mV OS T = -40C to +85C 26 A Input Offset Voltage Matching V 2.6 mV OS Input Offset Voltage Tempco TC 31 V/C VOS Input Bias Current I 0.01 1A B Input Offset Current I 0.01 A OS Input Resistance R 1G IN Common-Mode Rejection Ratio CMRR GND V V - 2.25V 50 70 dB CM CC Power-Supply Rejection Ratio PSRR 4.5V V 5.5V 40 60 dB CC 0.5V V 4.5V, R = 2k to V /2 80 OUT L CC Open-Loop Gain A 0.6V V 4.4V, R = 150 to V /2 50 70 dB VOL OUT L CC 0.4V V 3.5V, R = 150 to GND 50 70 OUT L V - V 0.05 CC OH R = 2k to V /2 L CC V - GND 0.05 OL V - V 0.15 0.4 CC OH Output Voltage Swing V R = 150 to V /2 V OUT L CC V - GND 0.15 0.4 OL V - V 0.3 0.8 CC OH R = 150 to GND L V - GND 0.01 0.05 OL Output Short-Circuit Current I Sinking or sourcing 100 mA SC V MAX4031E 0.8 IL SHDN Logic Threshold V V MAX4031E 2.0 IH I SHDN = GND (MAX4031E) 0.10 10 IL SHDN Logic Input Current A I SHDN = V (MAX4031E) 0.10 10 IH CC 2 MAX4030E/MAX4031E