MAX4389/MAX4390/ Ultra-Small, Low-Cost, 85MHz Op Amps with MAX4392MAX4396 Rail-to-Rail Outputs and Disable General Description Features Low Cost The MAX4389/MAX4390/MAX4392MAX4396 family of op amps are unity-gain stable devices that combine high- High Speed speed performance, rail-to-rail outputs, and disable mode. 85MHz -3dB Bandwidth 27MHz 0.1dB Gain Flatness These devices are targeted for applications where an 500V/s Slew Rate input or an output is exposed to the outside world, such as video and communications. Single 4.5V to 11V or Dual 2.25V to 5.5V Operation The MAX4389/MAX4390/MAX4392MAX4396 operate Rail-to-Rail Outputs from a single 4.5V to 11V supply or from dual 2.25V to Input Common-Mode Range Extends to V EE 5.5V supplies. The common-mode input voltage range Low Differential Gain/Phase: 0.015%/0.015 extends to the negative power-supply rail (ground in Low Distortion at 5MHz single-supply applications). The MAX4389/MAX4390/ -59dBc Spurious-Free Dynamic Range MAX4392MAX4396 consume only 5.5mA of quiescent High Output Drive: 50mA supply current per amplifier while achieving a 85MHz -3dB bandwidth, 27MHz 0.1dB gain flatness, and a 450A Disable Capability (MAX4389/MAX4393/MAX4394/MAX4396) 500V/s slew rate. Disable mode sets the outputs to high impedance while consuming only 450A of current. Space-Saving SC70, SOT23, MAX, or TSSOP Packages The MAX4389 single, MAX4393 dual, MAX4394 triple, and MAX4396 quad include disable capabilities. The Ordering Information MAX4389 and MAX4390 are available in ultra-small, 6-pin PIN- TOP SC70 packages. PART TEMP RANGE PACKAGE MARK MAX4389EXT+T -40C to +85C 6 SC70 ABF Applications MAX4389EUT+T -40C to +85C 6 SOT23 ABDC Set-Top Boxes Surveillance Video Systems MAX4390EXT+T -40C to +85C 6 SC70 ABE Analog-to-Digital Converter Interface MAX4390EUK+T -40C to +85C 5 SOT23 ADZM CCD Imaging Systems Digital Cameras +Denotes a lead(Pb)-free/RoHs-compliant package. T = Tape and reel. Video-on-Demand Video Line Driver Ordering Information continued at end of data sheet. Selector Guide appears at end of data sheet. MAX is a registered trademark of Maxim Integrated Products, Inc. Typical Operating Circuit Pin Configurations DISABLE TOP VIEW + IN OUT 1 6 V CC 75 OUT Z = 75 MAX4389 o MAX4389 V 2 5 DISABLE EE 75 IN+ 3 4 IN- 200 200 SC70/SOT23 Pin Configurations continued at end of data sheet. VIDEO LINE DRIVER 19-2322 Rev 6 4/15MAX4389/MAX4390/ Ultra-Small, Low-Cost, 85MHz Op Amps with MAX4392MAX4396 Rail-to-Rail Outputs and Disable Absolute Maximum Ratings Supply Voltage (V to V ) ................................-0.3V to +12V 8-Pin SO (derate 5.88mW/C above +70C) ...............471mW CC EE IN +, IN -, OUT , DISABLE .........(V - 0.3V) to (V + 0.3V) 8-Pin MAX (derate 4.5mW/C above +70C) ............362mW EE CC Differential Input Voltage ....................................................2.5V 10-Pin MAX (derate 5.6mW/C above +70C) ..........444mW Current into Input Pins .....................................................20mA 14-Pin SO (derate 8.33mW/C above +70C) .............667mW Output Short-Circuit Duration to 14-Pin TSSOP (derate 10mW/C above +70C) .........727mW V or V (Note 1)..............................................Continuous 20-Pin TSSOP (derate 10.9mW/C above +70C) ......879mW CC EE Continuous Power Dissipation (T = +70C) Operating Temperature Range ........................... -40C to +85C A 5-Pin SOT23 (derate 7.1mW/C above +70C) ..........571mW Junction Temperature ......................................................+150C 6-Pin SOT23 (derate 8.7mW/C above +70C) ..........696mW Storage Temperature Range ............................ -65C to +150C 6-Pin SC70 (derate 3.1mW/C above +70C) .............245mW Lead Temperature (soldering, 10s) .................................+300C Note 1: Continuous power dissipation must also be observed. Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. DC Electrical CharacteristicsSingle Supply (V = 5V, V = 0V, V = V /2, V = V /2, R = to V /2, DISABLE = V (MAX4389/MAX4393/MAX4394/MAX4396), CC EE CM CC OUT CC L CC CC T = T to T , unless otherwise noted. Typical values are at T = +25C.) (Note 2) A MIN MAX A PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS Input Common-Mode Voltage V - V - EE CC V Guaranteed by CMRR test V CM Range 0.2 2.25 T = +25C 5 18 A Input Offset Voltage V mV OS T = -40C to +85C 26 A Input Offset Voltage Matching MAX4392MAX4396 1 mV Input Offset Voltage Tempco TC 15 V/C VOS Input Bias Current I 2.5 15 A B Input Offset Current I 0.2 5 A OS Differential mode (-1V V +1V) 70 k IN Input Resistance R IN Common mode (-0.2V V +2.75V) 3 M CM Common-Mode Rejection Ratio CMRR (V - 0.2V) V (V - 2.25V) 70 95 dB EE CM CC 0.25V V 4.75V, R = 2k 50 70 OUT L Open-Loop Gain A 0.8V V 4.5V, R = 150 50 60 dB VOL OUT L 1V V 4V, R = 50 58 OUT L V - V 0.065 0.25 CC OH R = 2k L V - V 0.05 0.15 OL EE V - V 0.3 0.5 CC OH R = 150 L V - V 0.25 0.5 OL EE Output Voltage Swing V V OUT V - V 0.5 0.8 CC OH R = 75 L V - V 0.45 0.8 OL EE V - V 1 1.7 R = 75 to CC OH L ground V - V 0.025 0.1 OL EE Sinking from R = 75 to V 40 55 L CC Output Current I mA OUT Sourcing into R = 75 to V 40 50 L EE Output Short-Circuit Current I Sinking or sourcing 100 mA SC Maxim Integrated 2 www.maximintegrated.com