MAX5062/MAX5063/MAX5064 19-3502 Rev 5 5/07 125V/2A, High-Speed, Half-Bridge MOSFET Drivers General Description Features HIP2100/HIP2101 Pin Compatible (MAX5062A/ The MAX5062/MAX5063/MAX5064 high-frequency, 125V half-bridge, n-channel MOSFET drivers drive high- MAX5063A) and low-side MOSFETs in high-voltage applications. Up to 125V Input Operation These drivers are independently controlled and their 8V to 12.6V V Input Voltage Range DD 35ns typical propagation delay, from input to output, are 2A Peak Source and Sink Current Drive Capability matched to within 3ns (typ). The high-voltage operation with very low and matched propagation delay between 35ns Typical Propagation Delay drivers, and high source/sink current capabilities in a Guaranteed 8ns Propagation Delay Matching thermally enhanced package make these devices suit- Between Drivers able for the high-power, high-frequency telecom power Programmable Break-Before-Make Timing converters. The 125V maximum input voltage range pro- (MAX5064) vides plenty of margin over the 100V input transient requirement of telecom standards. A reliable on-chip Up to 1MHz Combined Switching Frequency while Driving 100nC Gate Charge (MAX5064) bootstrap diode connected between V and BST elimi- DD nates the need for an external discrete diode. Available in CMOS (V / 2) or TTL Logic-Level DD Inputs with Hysteresis The MAX5062A/C and the MAX5063A/C offer both nonin- verting drivers (see the Selector Guide). The Up to 15V Logic Inputs Independent of Input MAX5062B/D and the MAX5063B/D offer a noninverting Voltage high-side driver and an inverting low-side driver. The Low 2.5pF Input Capacitance MAX5064A/B offer two inputs per driver that can be Instant Turn-Off of Drivers During Fault or PWM either inverting or noninverting. The MAX5062A/B/C/D Start-Stop Synchronization (MAX5064) and the MAX5064A feature CMOS (V / 2) logic inputs. DD The MAX5063A/B/C/D and the MAX5064B feature TTL Low 200A Supply Current logic inputs. The MAX5064A/B include a break-before- Versions Available With Combination of make adjustment input that sets the dead time between Noninverting and Inverting Drivers (MAX5062B/D drivers from 16ns to 95ns. The drivers are available in the and MAX5063B/D) industry-standard 8-pin SO footprint and pin configura- Available in 8-Pin SO, Thermally Enhanced SO, tion, and a thermally enhanced 8-pin SO and 12-pin and 12-Pin Thin QFN Packages (4mm x 4mm) thin QFN packages. All devices operate over the -40C to +125C automotive temperature range. Ordering Information PIN- TOP PKG Applications PART TEMP RANGE PACKAGE MARK CODE Telecom Half-Bridge Power Supplies MAX5062AASA -40C to +125C 8 SO S8-5 Two-Switch Forward Converters MAX5062BASA -40C to +125C 8 SO S8-5 Full-Bridge Converters MAX5062CASA -40C to +125C 8 SO-EP* S8E-14 Active-Clamp Forward Converters MAX5062DASA -40C to +125C 8 SO-EP* S8E-14 Power-Supply Modules *EP = Exposed paddle. Devices are available in both leaded and lead-free packaging. Motor Control Specify lead-free by replacing -T with +T when ordering. Ordering Information continued at end of data sheet. Selector Guide PART HIGH-SIDE DRIVER LOW-SIDE DRIVER LOGIC LEVELS PIN COMPATIBLE MAX5062AASA Noninverting Noninverting CMOS (V / 2) HIP 2100IB DD MAX5062BASA Noninverting Inverting CMOS (V / 2) DD MAX5062CASA Noninverting Noninverting CMOS (V / 2) DD MAX5062DASA Noninverting Inverting CMOS (V / 2) DD Selector Guide continued at end of data sheet. Maxim Integrated Products 1 For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct at 1-888-629-4642, or visit Maxims website at www.maxim-ic.com.125V/2A, High-Speed, Half-Bridge MOSFET Drivers ABSOLUTE MAXIMUM RATINGS (All voltages referenced to GND, unless otherwise noted.) 8-Pin SO with Exposed Pad (derate 19.2mW/C V , IN H, IN L, IN L+, IN L-, IN H+, IN H-........-0.3V to +15V above +70C)* ....................................................1538.5mW DD DL, BBM .....................................................-0.3V to (V + 0.3V) 12-Pin Thin QFN (derate 24.4mW/C DD HS............................................................................-5V to +130V above +70C)* ....................................................1951.2mW DH to HS.....................................................-0.3V to (V + 0.3V) Maximum Junction Temperature .....................................+150C DD BST to HS ...............................................................-0.3V to +15V Operating Temperature Range .........................-40C to +125C AGND to PGND (MAX5064)..................................-0.3V to +0.3V Storage Temperature Range .............................-65C to +150C dV/dt at HS ........................................................................50V/ns Lead Temperature (soldering, 10s) .................................+300C Continuous Power Dissipation (T = +70C) A 8-Pin SO (derate 5.9mW/C above +70C)...............470.6mW *Per JEDEC 51 standard multilayer board. Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICS (V = V = +8V to +12.6V, V = GND = 0V, BBM = open, T = -40C to +125C, unless otherwise noted. Typical values are at DD BST HS A V = V = +12V and T = +25C.) (Note 1) DD BST A PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS POWER SUPPLIES Operating Supply Voltage V (Note 2) 8.0 12.6 V DD MAX5062 / 70 140 MAX5063 IN H = IN L = GND V Quiescent Supply Current I A DD DD (no switching) MAX5064 120 260 V Operating Supply Current I f = 500kHz, V = +12V 3 mA DD DDO SW DD BST Quiescent Supply Current I IN H = IN L = GND (no switching) 15 40 A BST BST Operating Supply Current I f = 500kHz, V = V = +12V 3 mA BSTO SW DD BST UVLO (V to GND) UVLO V rising 6.5 7.3 8.0 V DD VDD DD UVLO (BST to HS) UVLO BST rising 6.0 6.9 7.8 V BST UVLO Hysteresis 0.5 V LOGIC INPUT MAX5062 /MAX5064A, 0.67 x 0.55 x CMOS (V / 2) version V V Input-Logic High V DD DD DD V IH MAX5063 /MAX5064B, TTL version 2 1.65 MAX5062 /MAX5064A, 0.4 x 0.33 x CMOS (V / 2) version V V Input-Logic Low V DD DD DD V IL MAX5063 /MAX5064B, TTL version 1.4 0.8 MAX5062 /MAX5064A, 1.6 CMOS (V / 2) version Logic-Input Hysteresis V DD V HYS MAX5063 /MAX5064B, TTL version 0.25 2 MAX5062/MAX5063/MAX5064