MAX5204MAX5207 19-2658 Rev 1 10/04 Low-Cost, Voltage-Output, 16-Bit DACs in MAX General Description Features The MAX5204MAX5207 serial input, voltage-output 16- Guaranteed 16-Bit Monotonic bit digital-to-analog converters (DACs) provide monotonic 10-Pin 5mm 3mm MAX Package 16-bit output over temperature without any adjustments. The MAX5204/MAX5205 operate from a +5V single Rail-to-Rail Output Amplifier power supply and use an external reference ranging Single-Supply Operation from +4V to V , while the MAX5206/MAX5207 operate DD from a +3V or +3.3V single power supply and use an +5V (MAX5204/MAX5205) external reference ranging from +2V to V . The DD +3V, +3.3V (MAX5206/MAX5207) MAX5204MAX5207 DAC output range is typically from Low Power Consumption: 0.5mA 0 to V . DD The MAX5204MAX5207 feature a hardware reset input Shutdown Mode Reduces Supply Current to 1A (CLR) that when pulled low clears the output to zero SPI/QSPI/MICROWIRE-Compatible 3-Wire Serial code 0000 hex (MAX5205/MAX5207) or resets the out- Interface put to midscale code 8000 hex (MAX5204/MAX5206). The 3-wire serial interface is compatible with Power-On-Reset Sets Output to SPI/QSPI/MICROWIRE. All devices have a low- Midscale (MAX5204/MAX5206) power shutdown mode that reduces the supply current Zero-Scale (MAX5205/MAX5207) consumption to 1A. The MAX5204MAX5207 are available in a space-sav- ing 10-pin MAX package and are guaranteed over the extended temperature range (-40C to +105C). Refer to the MAX5200MAX5203 data sheet for internal Ordering Information reference versions. PART TEMP RANGE PIN-PACKAGE Applications MAX5204AEUB -40C to +105C 10 MAX Low-Cost VCO/VCXO Frequency Control MAX5204BEUB -40C to +105C 10 MAX Industrial Process Control MAX5204ACUB 0C to +70C 10 MAX High-Resolution Offset Adjustment MAX5205AEUB -40C to +105C 10 MAX MAX5205BEUB -40C to +105C 10 MAX MAX5205ACUB 0C to +70C 10 MAX MAX5206AEUB -40C to +105C 10 MAX MAX5206BEUB -40C to +105C 10 MAX Pin Configuration MAX5206ACUB 0C to +70C 10 MAX MAX5207AEUB -40C to +105C 10 MAX TOP VIEW MAX5207BEUB -40C to +105C 10 MAX MAX5207ACUB 0C to +70C 10 MAX CLR 1 10 DGND REF 2 9 SCLK MAX5204 AGND 3 8 DIN MAX5207 V 4 7 LDAC DD Selector Guide appears at end of data sheet. OUT 5 6 CS SPI/QSPI are trademarks of Motorola, Inc. MICROWIRE is a trademark of National Semiconductor Corp. MAX MAX is a registered trademark of Maxim Integrated Products, Inc. Maxim Integrated Products 1 For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct at 1-888-629-4642, or visit Maxims website at www.maxim-ic.com.Low-Cost, Voltage-Output, 16-Bit DACs in MAX ABSOLUTE MAXIMUM RATINGS V to AGND, DGND...............................................-0.3V to +6V Operating Temperature Ranges DD AGND to DGND..........................................-0.3V to +0.3V MAX520 CUB ......................................................0C to +70C REF, OUT to AGND.................................-0.3V to (V + 0.3V) MAX520 EUB ..........................................-40C to +105C DD CLR, LDAC, SCLK, DIN, CS to DGND .......-0.3V to (V + 0.3V) Junction Temperature......................................................+150C DD Maximum Current into Any Pin............................................50mA Storage Temperature Range .............................-60C to +150C Continuous Power Dissipation (T = +70C) Lead Temperature (soldering, 10s) .................................+300C A 10-Pin MAX (derate 5.6mW/C above +70C) .........444.4mW Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICSMAX5204/MAX5205 (V = +4.75V to +5.25V, f = 10MHz (50% duty cycle), V = 4.096V, output load = 10k in parallel with 250pF, T = T to DD SCLK REF A MIN T , unless otherwise noted. Typical values are at T = +25C.) MAX A PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS STATIC PERFORMANCE (Note 1) Resolution N 16 Bits MAX520 AEUB 10 20 Integral Nonlinearity (Note 2) INL MAX520 ACUB 10 20 LSB MAX520 BEUB 20 40 MAX520 A UB (Note 3) 1 Differential Nonlinearity DNL MAX520 BEUB (0C to +105C) (Note 3) 1 LSB (Note 2) MAX520 BEUB (-40C to 0C) 2 Inferred from measurement at 1C00 hex Offset Error 3 25 mV and FFFF hex Gain Error GE Within DAC output range (Note 4) 0.01 1 %FSR Offset Temperature Coefficient 1.5 V/C ppm of Gain Temperature Coefficient 3 FSR/C Power-Supply Rejection PSR V = 5V 5%, midscale input 0.06 0.5 mV/V DD DYNAMIC PERFORMANCE 0 to DAC Output Range (Note 2) V V DD Output-Voltage Slew Rate SR 0.6 V/s To 1LSB of FS, Output Settling Time 25 s V = 0.25 V to 0.75 V STEP REF REF Output Noise DAC code = 8400 hex, 10kHz 120 nV/Hz Major carry transition (code 7FFF hex to DAC Glitch Impulse 10 nVs code 8000 hex) Code = 0000 hex CS = V DD Digital Feedthrough 10 nVs LDAC = 0 SCLK, DIN = 0 or V DD From software shutdown to 90% of output Wake-Up Time 50 s code = FFFF hex From power applied to 90% of output Power-Up Time 10 ms code = FFFF hex 2 MAX5204MAX5207