MAX534 19-1105 Rev 0 8/96 +5V, Low-Power, 8-Bit Quad DAC with Rail-to-Rail Output Buffers General Description Features The MAX534 serial-input, voltage-output, 8-bit quad dig- +4.5V to +5.5V Single-Supply Operation ital-to-analog converter (DAC) operates from a single Ultra-Low Supply Current: +4.5V to +5.5V supply. Internal precision buffers swing 0.8mA while Operating rail to rail, and the reference input range includes both ground and the positive rail. The MAX534 features a 2.5A in Shutdown Mode 2.5A shutdown mode. Ultra-Small 16-Pin QSOP Package The serial interface is double buffered: a 12-bit input Ground to V Reference Input Range DD shift register is followed by four 8-bit buffer registers and four 8-bit DAC registers. The 12-bit serial word consists Output Buffer Amplifiers Swing Rail to Rail of eight data bits and four control bits (for DAC selection 10MHz Serial Interface Compatible with SPI, QSPI and special programming commands). Both the input (CPOL = CPHA = 0 or CPOL = CPHA = 1), and and DAC registers can be updated independently or Microwire simultaneously with a single software command. Two additional asynchronous control pins, LDAC and CLR, Double-Buffered Registers for Synchronous provide simultaneous updating or clearing of the input Updating and DAC registers. Serial Data Output for Daisy Chaining The interface is compatible with SPI, QSPI (CPOL = CPHA = 0 or CPOL = CPHA = 1), and Microwire. A Power-On Reset Clears Serial Interface and Sets buffered data output allows daisy chaining of serial All Registers to Zero devices. Software Shutdown In addition to 16-pin DIP and CERDIP packages, the Software-Programmable Logic Output (C I/O MAX534 is available in a 16-pin QSOP that occupies the same area as an 8-pin SO. Extender) For operation guaranteed to 2.7V, see the MAX533 Asynchronous Hardware Clear Resets All Internal data sheet. Registers to Zero Applications Ordering Information Digital Gain and Offset Adjustments INL Programmable Attenuators PART TEMP. RANGE PIN-PACKAGE (LSB) Programmable Current Sources MAX534ACPE 0C to +70C 16 Plastic DIP 1 Portable Instruments MAX534BCPE 0C to +70C 16 Plastic DIP 2 MAX534ACEE 0C to +70C 16 QSOP 1 Pin Configuration MAX534BCEE 0C to +70C 16 QSOP 2 MAX534BC/D 0C to +70C Dice* 2 TOP VIEW MAX534AEPE -40C to +85C 16 Plastic DIP 1 OUTB 1 16 OUTC MAX534BEPE -40C to +85C 16 Plastic DIP 2 OUTA 2 15 OUTD MAX534AEEE -40C to +85C 16 QSOP 1 REF 3 14 AGND MAX534BEEE -40C to +85C 16 QSOP 2 UPO 4 MAX534 13 V DD MAX534AMJE -55C to +125C 16 CERDIP** 1 PDE 5 MAX534BMJE -55C to +125C 16 CERDIP** 2 12 DGND *Dice are tested at T = +25C. LDAC 6 A 11 DIN **Contact factory for availability and processing to MIL-STD-883. CLR 7 10 SCLK DOUT 8 9 CS Functional Diagram appears at end of data sheet. DIP/QSOP SPI and QSPI are trademarks of Motorola, Inc. Microwire is a trademark of National Semiconductor Corp. Maxim Integrated Products 1 For free samples & the latest literature: +5V, Low-Power, 8-Bit Quad DAC with Rail-to-Rail Output Buffers ABSOLUTE MAXIMUM RATINGS V to DGND ..............................................................-0.3V, +6V Continuous Power Dissipation (T = +70C) DD A V to AGND...............................................................-0.3V, +6V Plastic DIP (derate 10.53mW/C above +70C) .........842mW DD Digital Input Voltage to DGND ....................................-0.3V, +6V QSOP (derate 8.3mW/C above +70C).....................667mW Digital Output Voltage to DGND....................-0.3V, (V + 0.3V) CERDIP (derate 10.00mW/C above +70C)..............800mW DD AGND to DGND..................................................................0.3V Operating Temperature Ranges REF................................................................-0.3V, (V + 0.3V) MAX534 C E ..................................................0C to +70C DD OUT ...........................................................................-0.3V, V MAX534 E E ...............................................-40C to +85C DD Maximum Current into Any Pin............................................50mA MAX534 MJE .............................................-55C to +125C Storage Temperature Range .............................-65C to +150C Lead Temperature (soldering, 10sec) .............................+300C Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICS (V = +4.5V to +5.5V, V = 4.096V, AGND = DGND = 0V, R = 10k, C = 100pF, T = T to T , unless otherwise noted. DD REF L L A MIN MAX Typical values are at V = +5V and T = +25C.) DD A PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS STATIC ACCURACY Resolution 8 Bits MAX534A 1 Integral Nonlinearity INL LSB (Note 1) MAX534B 2 Differential Nonlinearity (Note 1) DNL Guaranteed monotonic (all codes) 1.0 LSB Zero-Code Error ZCE Code = 00 hex 20 mV Zero-Code-Error Supply Code = 00 hex, V = 4.5V to 5.5V 1 LSB DD Rejection Zero-Code Temperature Code = 00 hex 10 V/C Coefficient Full-Scale Error Code = FF hex 30 mV Full-Scale Error Supply Code = FF hex, V = 4.5V to 5.5V 1 LSB DD Rejection Full-Scale Temperature Code = FF hex 10 V/C Coefficient REFERENCE INPUTS Input Voltage Range 0VDD V Input Resistance 322 460 598 k Input Capacitance 10 pF Channel-to-Channel Isolation (Note 2) -60 dB AC Feedthrough (Note 3) -60 dB DAC OUTPUTS Output Voltage Range R = open 0V V L REF Code = FF hex, measured with I = 0mA to L Load Regulation 0.156 LSB/mA 1.6mA 2 MAX534