Design Tools Support Resources and Models Click here to ask an associate for production status of specific part numbers. Precision High-Voltage Reference in SOT23 MAX6043 General Description Features The MAX6043 precision voltage reference provides +2.5V, +3.3V, +4.096V, +5.0V, or +10V Output accurate preset +2.5V, +3.3V, +4.096V, +5.0V, and +10V Voltages reference voltages from up to +40V input voltages. The Excellent Temperature Stability: 15ppm/C (max) MAX6043 features a proprietary temperature coefficient Tight Initial Accuracy: 0.05% (max) curvature-correction circuit and laser-trimmed thin-film Tiny SOT23 Package resistors that result in a very low temperature coefficient of 15ppm/C (max) and excellent initial accuracy of 0.05% Wide +4.5V to +40V Supply Voltage Range (max). Low temperature drift and low noise make the Low Noise: 4V (typ at 2.5V Output) P-P MAX6043 ideal for use with high-resolution A/D or D/A Short-Circuit Protected converters. Wide Operating Temperature Range The MAX6043 draws 320A of supply current and sourc- -40C to +125C es 10mA or sinks 0.6mA of load current. The MAX6043 Stable with Capacitive Loads from 0 to 100F uses bandgap technology for low-noise performance and excellent accuracy. The MAX6043 does not require No External Capacitors Required for Stability an output bypass capacitor for stability, and is stable with capacitive loads up to 100F. Eliminating the output Pin Configuration bypass capacitor saves valuable board area in space- TOP VIEW critical applications. The supply-independent, low supply current makes the MAX6043 ideal for battery-operated, high-performance systems. I.C.* 1 6 OUTS The MAX6043 is available in a 6-pin SOT23 package and operates over the automotive (-40C to +125C) MAX6043 GND 2 5 OUTF temperature range. I.C.* 3 4 IN Applications Analog-to-Digital Converters SOT23 Digital-to-Analog Converters Digital Voltmeters *INTERNALLY CONNECTED. DO NOT CONNECT. Voltage Regulators Threshold Detectors Ordering Information OUTPUT VOLTAGE TEMPCO INITIAL ACCURACY PART TOP MARK (V) (PPM/C) (%) MAX6043BAUT25-T 2.500 20 0.10 ABDQ MAX6043CAUT25-T 2.500 65 0.50 ABDR MAX6043BAUT33-T 3.300 20 0.10 ABDS MAX6043BAUT41-T 4.096 20 0.10 ABDU Denotes an RoHS-compliant device that may include lead that is exempt under the RoHS requirements. T = Tape and reel. Ordering Information continued at end of data sheet. Typical Operating Circuit appears at end of data sheet. 19-3036 Rev 7 11/21 2021 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. One Analog Way, Wilmington, MA 01887 U.S.A. Tel: 781.329.4700 2021 Analog Devices, Inc. All rights reserved.MAX6043 Precision High-Voltage Reference in SOT23 Absolute Maximum Ratings IN to GND ..............................................................-0.3V to +42V Junction Temperature Range ........................... -65C to +150C OUTF, OUTS to GND .................................-0.3V to (V + 0.3V) Maximum Junction Temperature .....................................+150C IN Continuous Power Dissipation (T = +70C) Lead Temperature (soldering, 10s) .................................+300C A 6-Pin SOT23 (derate 7.40mW/C above +70C) ...595.20mW Soldering Temperature (reflow) OUT Short-Circuit Duration ................................................... 5s RoHS-compliant package ............................................+245C Operating Temperature Range ......................... -40C to +125C Packages containing lead(Pb) .....................................+240C Storage Temperature Range ............................ -65C to +150C Package Information 6 SOT23 PACKAGE CODE U6F+6 Outline Number 21-0058 Land Pattern Number 90-0175 Thermal Resistance, Single-Layer Board Junction to Ambient ( ) 185.50C/W JA Junction to Case ( ) 75C/W JC Thermal Resistance, Four-Layer Board Junction to Ambient ( ) 134.40C/W JA Junction to Case ( ) 39C/W JC For the latest package outline information and land patterns (footprints), go to www.maximintegrated.com/packages. Note that a +, , or - in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the package regardless of RoHS status. Package thermal resistances were obtained using the method described in JEDEC specification JESD51-7, using a four-layer board. For detailed information on package thermal considerations, refer to www.maximintegrated.com/thermal-tutorial. Analog Devices 2 www.analog.com