MAX9153/MAX9154 19-2167 Rev 0 10/01 Low-Jitter, 800Mbps, 10-Port LVDS Repeaters with 100 Drive General Description Features The MAX9153/MAX9154 low-jitter, low-voltage differential Ultra-Low 90ps (max) Added Deterministic p-p signaling (LVDS) repeaters are ideal for applications that 23 Jitter at 800Mbps (2 -1) PRBS Pattern require high-speed data or clock distribution while mini- 1ps (max) Added Random Jitter RMS mizing power, space, and noise. The devices accept a single LVDS input (MAX9153) or single LVPECL input 60ps (max) Skew Between Channels (MAX9154) and repeat the signal at 10 LVDS outputs. Guaranteed 800Mbps Data Rate Each differential output drives 100, allowing point-to- point distribution of signals on transmission lines with LVDS (MAX9153) or LVPECL (MAX9154) Input 100 termination at the receiver input. Versions Ultra-low 90ps (max) added deterministic jitter and p-p Fail-Safe Circuit Sets Output High for Undriven 1ps (max) added random jitter ensure reliable com- RMS Inputs (MAX9153) munication in high-speed links that are highly sensitive to timing error, especially those incorporating clock-and- High-Impedance Differential Input when V = 0 CC data recovery or serializers and deserializers. The high- 2A Power-Down Supply Current speed switching performance guarantees 800Mbps data rate and less than 60ps (max) skew between channels Conforms to ANSI/EIA/TIA-644 LVDS Standard while operating from a single +3.3V supply. Pin-Compatible Upgrade to DS90LV110 Supply current at 800Mbps is 118mA and reduces to 2A in power-down mode. LVDS inputs and outputs con- form to the ANSI/EIA/TIA -644 standard. A fail-safe fea- ture on the MAX9153 sets the output high when the input is undriven and open, terminated, or shorted. The Ordering Information MAX9153/MAX9154 are available in a 28-pin TSSOP package and are specified for the -40C to +85C TEMP. PIN- PART INPUT extended temperature range. RANGE PACKAGE Refer to the MAX9150 data sheet for a pin-compatible MAX9153EUI -40C to +85C 28 TSSOP LVDS 10-port LVDS repeater capable of driving a double-termi- MAX9154EUI -40C to +85C 28 TSSOP LVPECL nated (50) LVDS link. Refer to the MAX9110/MAX9112 and MAX9111/MAX9113 data sheets for LVDS line drivers and receivers. Applications Typical Application Circuit Cellular Phone Base-Stations Add/Drop Muxes LVDS Digital Cross-Connects MAX9153 1 R 100 X MAX9154 Network Switches/Routers * LVDS Backplane Interconnect BACKPLANE MAX9111 OR CABLE Clock Distribution T 100 X 10 R 100 X MAX9110 MAX9111 Pin Configuration appears at end of data sheet. *(LVPECL INPUT FOR MAX9154) Maxim Integrated Products 1 For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct at 1-888-629-4642, or visit Maxims website at www.maxim-ic.com.Low-Jitter, 800Mbps, 10-Port LVDS Repeaters with 100 Drive ABSOLUTE MAXIMUM RATINGS V to GND...........................................................-0.3V to +4.0V Storage Temperature.........................................-65C to +150C CC RIN+, RIN- to GND................................................-0.3V to +4.0V Maximum Junction Temperature .....................................+150C PWRDN to GND..........................................-0.3V to (V + 0.3V) Operating Temperature Range ...........................-40C to +85C CC DO +, DO - to GND..............................................-0.3V to +4.0V ESD Protection Short-Circuit Duration (DO +, DO -) .........................Continuous Human Body Model (RIN+, RIN-, DO +, DO -) ..............8kV Continuous Power Dissipation (T = +70C) Lead Temperature (soldering, 10s) .................................+300C A 28-Pin TSSOP (derate 12.8mW/C above +70C) .....1026mW Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. DC ELECTRICAL CHARACTERISTICS (V = +3.0V to +3.6V, R = 100 1%, differential input voltage V = 0.05V to 1.2V, MAX9153 LVDS input common-mode voltage CC L ID V = V /2 to 2.4V - V /2 , MAX9154 LVPECL input voltage range = 0 to V , PWRDN = high, T = -40C to +85C, unless other- CM ID ID CC A wise noted. Typical values are at V = +3.3V, V = 0.2V, V = 1.2V, T = +25C.) (Notes 1 and 2) CC ID CM A PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS CONTROL INPUT (PWRDN) V Input High Voltage IH 2.0 V V CC Input Low Voltage V GND 0.8 V IL Input Current I PWRDN = high or low -20 20 A IN DIFFERENTIAL INPUT (RIN+, RIN-) Differential Input High Threshold V -3 50 mV TH Differential Input Low Threshold V -50 -3 mV TL 0.05V V 0.6V, PWRDN = high or low ID -15 -3 15 (Figure 1) I , RIN+ Input Current (MAX9153) A I RIN- 0.6V < V 1.2V, PWRDN = high or low ID -20 -4 20 (Figure 1) 0.05V V 0.6V, V = 0 or open, ID CC -15 3 15 PWRDN = 0 or open (Figure 1) Power-Off Input Current I , RIN+ (OFF) A (MAX9153) I RIN- (OFF) 0.6V < V 1.2V, V = 0 or open, ID CC -20 4 20 PWRDN = 0 or open (Figure 1) PWRDN = high or low (Figure 1) 103 Input Resistor 1 (MAX9153) R k IN1 V = 0 or open, PWRDN = 0 or open CC 103 (Figure 1) PWRDN = high or low (Figure 1) 154 Input Resistor 2 (MAX9153) R k IN2 V = 0 or open, PWRDN = 0 or CC 154 open(Figure 1) V = 3.6V, V = 3.6V or 0, PWRDN = RIN+ RIN- -10 3 10 high or low (Figure 2) I , RIN+ Input Current (MAX9154) A I RIN- V = 0, V = 3.6V or 0, PWRDN = RIN+ RIN- -10 3 10 high or low (Figure 2) V = 3.6V, V = 0, V = 0 or open, RIN+ RIN- CC -10 3 10 PWRDN = 0 or open (Figure 2) Power-Off Input Current I , RIN+ (OFF) A (MAX9154) I RIN- (OFF) V = 0, V = 3.6V, V = 0 or open, RIN+ RIN- CC -10 3 10 PWRDN = 0 or open (Figure 2) 2 MAX9153/MAX9154