MAX9650ATA+T Analog Devices

Click here for production status of specific part numbers. MAX9650/MAX9651 High-Current VCOM Drive Op Amps for TFT LCDs General Description Applications The MAX9650/MAX9651 are single- and dual-channel TFT-LCD Panels VCOM amplifiers with rail-to-rail inputs and outputs. The Instrument Control Voltage Sources MAX9650/MAX9651 can drive up to 1300mA of peak current per channel and operate up to 20V. Features The MAX9650/MAX9651 are designed to source and sink 1300mA Peak Output Current a high current quickly to hold the VCOM voltage stable in large TFT-LCD panels. Rail-to-Rail Inputs and Outputs The MAX9650/MAX9651 feature 40V/s slew rate and Operates Up to 20V 35MHz bandwidth to quickly settle outputs for 120Hz 40V/s Slew Rate frame rate and full HD television. 35MHz Bandwidth The MAX9650/MAX9651 feature output short-circuit 5mA Quiescent Current per Channel protection and thermal shutdown. These devices are available in exposed pad packages for excellent heat Excellent Heat Dissipation (Exposed Pad) dissipation. Pin Configurations and Ordering Information appear at end of data sheet. Typical Operating Circuit 16V V DD MAX9650 TFT LCD IN + V REF OUT IN - *R S TFT-LCD CAPACITANCE GND *R MAY BE NEEDED FOR SOME APPLICATIONS. S 19-4187 Rev 8 1/19MAX9650/MAX9651 High-Current VCOM Drive Op Amps for TFT LCDs Absolute Maximum Ratings Supply Voltage (V to GND) ...............................-0.3V to +22V Operating Temperature Range ......................... -40C to +125C DD Any Other Pin to GND .............................. -0.3V to (V + 0.3V) Junction Temperature ......................................................+150C DD IN +/IN - (current) ...........................................................20mA Storage Temperature Range ............................ -65C to +150C OUT (current) .....................................................................1.3A Lead Temperature (soldering, 10s) .................................+300C Continuous Power Dissipation (T = +70C) Soldering Temperature (reflow) .......................................+260C A SOT23 (derate 3.7mW/C above +70C) .................297.4mW MAX-EP (derate 12.9mW/C above +70C) .........................................................1030.9mW TDFN-EP (derate 23.8mW/C above +70C) .........................................................1951.2mW Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Package Information SOT23 Package Code Z5+2A Outline Number 21-0113 Land Pattern Number 90-0241 Thermal Resistance, Four-Layer Board: Junction to Ambient ( ) 146.4 JA Junction to Case ( ) 93.5 JC AX-EP Package Code U8E+2 Outline Number 21-0107 Land Pattern Number 90-0145 Thermal Resistance, Single-Layer Board: Junction to Ambient ( ) 97 JA Junction to Case ( ) 5 JC Thermal Resistance, Four-Layer Board: Junction to Ambient ( ) 77.6 JA Junction to Case ( ) 5 JC MAX is a registered trademark of Maxim Integrated Products, Inc. Maxim Integrated 2 www.maximintegrated.com