MAX96708GTJ+ Analog Devices

EVALUATION KIT AVAILABLE MAX96708 14-Bit GMSL Deserializer with Coax or STP Cable Input General Description Benefits and Features The MAX96708 is a compact deserializer especially suited Ideal for Safety Camera Applications for automotive camera applications. Features include Works with Low-Cost 50 Coax (100 STP) Cable adaptive equalization and an output crosspoint switch. An Error Detection of Video/Control Data High-Immunity Mode for Robust Control-Channel embedded control channel operates at 9.6kbps to 1Mbps 2 2 in UART, I C, and mixed UART/I C modes, allowing EMC Tolerance Best-in-Class Supply Current: 185mA (max) programming of serializer, deserializer (SerDes), and camera registers, independent of video timing. Adaptive Equalization for 15m Cable at Full Speed 32-Pin (5mm x 5mm) TQFN Package The deserializer can track data from a spread- Horizontal- and Vertical-Sync Encoding spectrum serial input. The serial input meets ISO 10605 and Tracking and IEC 61000-4-2 ESD standards. The core supply High-Speed Deserialization for Megapixel Cameras range is 1.7V to 1.9V and the I/O supply range is 1.7V Up to 1.74Gbps Serial-Bit Rate to 3.6V. The device is available in a 32-pin (5mm x 5mm) 6.25MHz to 87MHz x 12-Bit + H/V Data TQFN package with 0.5mm lead pitch and operates over 36.66MHz to 116MHz x 11-Bit + H/V Data -40C to +115C temperature range. Multiple Modes for System Flexibility 9.6kbps to 1Mbps Control Channel in UART, Applications 2 2 I C (with Clock Stretch), or UART-to-I C Modes Automotive Camera Applications 2:1 Input Mux for Camera Selection 2 15 Hardware-Selectable I C-Device Addresses Pairs with Any Maxim GMSL Serializer Simplified Block Diagram Crosspoint Switch Maps Data to any Output Reduces EMI and Shielding Requirements Spread-Spectrum Serial-Input Tracking and Transfer VIDEO VIDEO to the Parallel Output 1.7V to 1.9V Core and 1.7V to 3.6V I/O Supply CAM MAX96709 MAX96708 GPU Peripheral Features for System Verification Built-In PRBS Receiver for BER Testing 2 2 I C I C Dedicated Up/Down GPI for Camera Frame Sync Trigger and Other Uses Meets AEC-Q100 Automotive Specification -40C to +115C Operating Temperature Range 8kV Contact and 15kV Air IEC 61000-4-2 and Ordering Information appears at end of data sheet. ISO 10605 ESD Protection 19-7784 Rev 1 3/17MAX96708 14-Bit GMSL Deserializer with Coax or STP Cable Input TABLE OF CONTENTS General Description ............................................................................ 1 Applications .................................................................................. 1 Benefits and Features .......................................................................... 1 Simplified Block Diagram........................................................................ 1 Absolute Maximum Ratings ...................................................................... 7 Package Thermal Characteristics ................................................................. 7 32-Pin TQFN-EP . 7 DC Electrical Characteristics ..................................................................... 8 AC Electrical Characteristics 13 Typical Operating Characteristics ................................................................ 16 Pin Configuration ............................................................................. 17 Pin Description ............................................................................... 18 Functional Diagrams .......................................................................... 20 Detailed Description........................................................................... 26 Serial Link Signaling and Data Format . 26 Operating Modes . 26 Video/Configuration Link . 26 Single and Double Modes of Operation . 26 HS/VS Encoding . 26 Error Detection . 26 Bus Widths 27 Forward Control Channel . 29 Reverse Control Channel . 29 UART Interface 29 2 I C Interface 29 Remote-End Operation 29 Clock-Stretch Timing 29 GPO/GPI Control . 29 Adaptive Line Equalizer 30 Spread-Spectrum Tracking 30 Cable-Type Configuration and Input MUX 30 Crosspoint Switch . 30 Shutdown/Sleep Modes 31 Configuration Link 31 Serialization Disable 31 Sleep Mode . 31 Power-Down Mode 31 Link-Startup Procedure . 31 Maxim Integrated 2 www.maximintegrated.com